Project Draggin Wagon K20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bus Ted Knuckle · 05-07-2007, 10:26 AM

This is my new project, a 81 k-20. Actually it is a compilation of several years parts and pieces. I got it moved into the shop this weekend and I poked it over good.

If you remember from my first post (in the 73-87 fourm), I got this truck for free from a guy that was in the process of swapping this new cab onto his frame. I guess it is like a big jig-saw puzzle and now I have to put the pieced back together. It is dusty and dirty, but I think it is all there. This is my first 4X4 project (of my own that is), been fun so far!

I took the carb off to rebuild, discovered that it has a goodwrench 350 in it that has pretty good compression, no leaks either. The T-case crossmember is trashed. I got another one order. The springs are WORN severly I see a rather expensive spring order in my future. The drive line is pretty tight, U-joints are all good, and the rotors and drums are in good shape. Actually the brakes work pretty good considering this truck has not been on the road in about 15 years

The pedals in this cab are screwy (combination of mechanical and hydraulic clutch parts!?!, too much wiggle etc in the pedals). I spent some time on saturday taking the pedals out of the 76 parts truck, but I did not get them all the way out though before I had to stop for the day.

I am seriously looking foward to getting this thing going! I have visions of a CUCV clone in desert tan drab, HUGE front and rear bumpers, winches front and rear, lots of rubber, and since I am going to be using it as my trailer hauler/project recovery truck, I am going to mount a gas powered air compressor in the back (been waiting on a good place to put that!) and a couple of tool boxes. It will be my new "DRAGGIN WAGON"

and hence forth, that will be the new name of this project:

"DRAGGIN' WAGON"

**Yukon Jack** · 05-07-2007, 11:32 AM

Should be a fun project - post lots of pics!

ND_guy · 05-07-2007, 11:45 AM

Quote:

Originally Posted by Yukon Jack

Should be a fun project - post lots of pics!

X2 We love pics

Bishops Trucks · 05-07-2007, 11:46 AM

Something ate the carburator while it sat there. Have fun with, love those 3/4 ton trucks.

Bus Ted Knuckle · 05-08-2007, 02:48 PM

thanks for all the comments guys, I'll keep you posted as progress happens.

05-07-2007, 10:26 AM	#1
Bus Ted Knuckle Son of a gun Join Date: Jan 2007 Location: Hot Springs, Arkansas Posts: 1,636	Project Draggin Wagon K20 This is my new project, a 81 k-20. Actually it is a compilation of several years parts and pieces. I got it moved into the shop this weekend and I poked it over good. If you remember from my first post (in the 73-87 fourm), I got this truck for free from a guy that was in the process of swapping this new cab onto his frame. I guess it is like a big jig-saw puzzle and now I have to put the pieced back together. It is dusty and dirty, but I think it is all there. This is my first 4X4 project (of my own that is), been fun so far! I took the carb off to rebuild, discovered that it has a goodwrench 350 in it that has pretty good compression, no leaks either. The T-case crossmember is trashed. I got another one order. The springs are WORN severly I see a rather expensive spring order in my future. The drive line is pretty tight, U-joints are all good, and the rotors and drums are in good shape. Actually the brakes work pretty good considering this truck has not been on the road in about 15 years The pedals in this cab are screwy (combination of mechanical and hydraulic clutch parts!?!, too much wiggle etc in the pedals). I spent some time on saturday taking the pedals out of the 76 parts truck, but I did not get them all the way out though before I had to stop for the day. I am seriously looking foward to getting this thing going! I have visions of a CUCV clone in desert tan drab, HUGE front and rear bumpers, winches front and rear, lots of rubber, and since I am going to be using it as my trailer hauler/project recovery truck, I am going to mount a gas powered air compressor in the back (been waiting on a good place to put that!) and a couple of tool boxes. It will be my new "DRAGGIN WAGON" and hence forth, that will be the new name of this project: "DRAGGIN' WAGON" Attached Images __________________ Bill BEATERS ARE NEATER

05-07-2007, 11:32 AM	#2
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Re: Project Draggin Wagon K20 Should be a fun project - post lots of pics! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

05-07-2007, 11:46 AM	#4
Bishops Trucks KEEP ON TRUCKIN' Join Date: Jun 2005 Location: Sterling, Va. Posts: 5,730	Re: Project Draggin Wagon K20 Something ate the carburator while it sat there. Have fun with, love those 3/4 ton trucks. __________________ JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10 Father/Son Project http://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER"

05-08-2007, 02:48 PM	#5
Bus Ted Knuckle Son of a gun Join Date: Jan 2007 Location: Hot Springs, Arkansas Posts: 1,636	Re: Project Draggin Wagon K20 thanks for all the comments guys, I'll keep you posted as progress happens. __________________ Bill BEATERS ARE NEATER

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.