long fleet bed and some doors - The 1947 - Present Chevrolet & GMC Truck Message Board Network

centsless · 05-08-2007, 11:26 PM

I have a long fleet bed that is in need of a home. It is rough, but I have seen worse. If yo put a bedliner in it, it would work OK. $75 pick up only, no shipping. The doors are also a little rough, but fixable. $25 ea no shipping. There is also a left fender (aftermarket) it has no rust, but quite a few small dings and dents. $30 no shipping. These have to go by next week, so let me know if you are interested.
Attachment 265765

Attachment 265766

Attachment 265767

Attachment 265768

Attachment 265769

1970bowtie · 05-08-2007, 11:29 PM

bed looks like a good canidate for my long fleet to short fleet project...but im too far away.

**special-K** · 05-09-2007, 07:00 AM

Do you have a pair of those mirrors shown on that bronze door?

Jim_PA · 05-09-2007, 07:53 AM

That tailgate doesn't look too bad -- Is it as good as it looks?

I'd take the whole bed for the gate if the condition is right

centsless · 05-09-2007, 12:31 PM

I only have the one mirror. The tailgate is OK. It has some rust through at the bottom, but is not bowed. I will get some closer pics of it later and post them.

Jim_PA · 05-09-2007, 12:33 PM

Quote:

Originally Posted by centsless

I only have the one mirror. The tailgate is OK. It has some rust through at the bottom, but is not bowed. I will get some closer pics of it later and post them.

I'd appreciate it-

-Thanks

Evans · 05-09-2007, 04:33 PM

Got pics of the fender ??

Evans · 05-09-2007, 04:36 PM

Quote:

Originally Posted by Jim_PA

That tailgate doesn't look too bad -- Is it as good as it looks?

I'd take the whole bed for the gate if the condition is right

Jim , I'd be interested in the bed if want to swing by Dallastown with it.... If you get it ....

Evans

Jim_PA · 05-09-2007, 09:00 PM

Quote:

Originally Posted by Evans

Jim , I'd be interested in the bed if want to swing by Dallastown with it.... If you get it ....

Evans

Sounds good -

centsless · 05-09-2007, 09:42 PM

I did not get a chance to get tailgate pics today, but I will tomorrow. Had sick kids here today....

centsless · 05-10-2007, 08:45 PM

Here are the tailgate pics
Attachment 266240

Attachment 266241

Attachment 266242

Attachment 266243

centsless · 05-10-2007, 08:47 PM

here are the fender pics
Attachment 266244

Attachment 266245

Attachment 266246

Attachment 266247

**jaros44sr** · 05-10-2007, 09:10 PM

If no one takes the bed, I might me able to use the bulkhead, if its strait. Thx J.

centsless · 05-10-2007, 09:13 PM

The headboard is OK it does have a little bow in it but not too bad at all

**jaros44sr** · 05-11-2007, 06:07 AM

Quote:

Originally Posted by centsless

The headboard is OK it does have a little bow in it but not too bad at all

Do you think you could take it off, I'll pay you for your time as well as the pc. Has anyone claimed the bed yet?I won't be able to get down there for several weeks. Thx J.

Jim_PA · 05-11-2007, 08:16 AM

I'm going to pass - the pictures of the tailgate helped -- THANKS!

1lowdiesel · 05-11-2007, 09:41 AM

whats your zip? i'd like another lb to cut down.

centsless · 05-12-2007, 04:37 PM

ttt

centsless · 05-12-2007, 06:44 PM

Bed and fender sold to Evans!!
Doors still available

Evans · 05-12-2007, 10:23 PM

Thanks Bob !!! Everything made it back to PA in one pc. !!!

05-08-2007, 11:26 PM	#1
centsless sufficiently talented fool Join Date: Jun 2006 Location: Forest Hill, MD Posts: 2,231	long fleet bed and some doors I have a long fleet bed that is in need of a home. It is rough, but I have seen worse. If yo put a bedliner in it, it would work OK. $75 pick up only, no shipping. The doors are also a little rough, but fixable. $25 ea no shipping. There is also a left fender (aftermarket) it has no rust, but quite a few small dings and dents. $30 no shipping. These have to go by next week, so let me know if you are interested. Attachment 265765 Attachment 265766 Attachment 265767 Attachment 265768 Attachment 265769 __________________ "it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board Last edited by centsless; 10-04-2007 at 08:51 PM.

05-08-2007, 11:29 PM	#2
1970bowtie Senior Member Join Date: Apr 2007 Location: East Texas Posts: 549	Re: long fleet bed and some doors bed looks like a good canidate for my long fleet to short fleet project...but im too far away. __________________ Justin 1970 c/10 short wide bed My build thread WTT 1970 chevy front end for 67/68 chevy front end WTT 2 15x10 american racing outlaw 2 wheels for 2 of the same in a 15x7 or 15x8

05-09-2007, 07:00 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: long fleet bed and some doors Do you have a pair of those mirrors shown on that bronze door? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-09-2007, 07:53 AM	#4
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: long fleet bed and some doors That tailgate doesn't look too bad -- Is it as good as it looks? I'd take the whole bed for the gate if the condition is right Last edited by Jim_PA; 05-09-2007 at 07:58 AM.

05-09-2007, 12:31 PM	#5
centsless sufficiently talented fool Join Date: Jun 2006 Location: Forest Hill, MD Posts: 2,231	Re: long fleet bed and some doors I only have the one mirror. The tailgate is OK. It has some rust through at the bottom, but is not bowed. I will get some closer pics of it later and post them. __________________ "it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board

05-09-2007, 04:33 PM	#7
Evans Registered User Join Date: Feb 2007 Location: Dallastown , Pa Posts: 261	Re: long fleet bed and some doors Got pics of the fender ??

05-09-2007, 09:42 PM	#10
centsless sufficiently talented fool Join Date: Jun 2006 Location: Forest Hill, MD Posts: 2,231	Re: long fleet bed and some doors I did not get a chance to get tailgate pics today, but I will tomorrow. Had sick kids here today.... __________________ "it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board

05-10-2007, 08:45 PM	#11
centsless sufficiently talented fool Join Date: Jun 2006 Location: Forest Hill, MD Posts: 2,231	Re: long fleet bed and some doors Here are the tailgate pics Attachment 266240 Attachment 266241 Attachment 266242 Attachment 266243 __________________ "it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board Last edited by centsless; 10-04-2007 at 08:51 PM.

05-10-2007, 08:47 PM	#12
centsless sufficiently talented fool Join Date: Jun 2006 Location: Forest Hill, MD Posts: 2,231	Re: long fleet bed and some doors here are the fender pics Attachment 266244 Attachment 266245 Attachment 266246 Attachment 266247 __________________ "it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board Last edited by centsless; 10-04-2007 at 08:51 PM.

05-10-2007, 09:10 PM	#13
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,761	Re: long fleet bed and some doors If no one takes the bed, I might me able to use the bulkhead, if its strait. Thx J. __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

05-10-2007, 09:13 PM	#14
centsless sufficiently talented fool Join Date: Jun 2006 Location: Forest Hill, MD Posts: 2,231	Re: long fleet bed and some doors The headboard is OK it does have a little bow in it but not too bad at all __________________ "it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board

05-11-2007, 08:16 AM	#16
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: long fleet bed and some doors I'm going to pass - the pictures of the tailgate helped -- THANKS!

05-11-2007, 09:41 AM	#17
1lowdiesel Senior Member Join Date: Oct 2006 Location: central jersey Posts: 763	Re: long fleet bed and some doors whats your zip? i'd like another lb to cut down. __________________ 69 4wd V6 20k orig miles!! 05 ccsb 2wd Diesel 500hp bagged and soon to be stock floored. 01 rcsb chevy 2wd 6bt cummins :devil:> build xtremediesel.com

05-12-2007, 04:37 PM	#18
centsless sufficiently talented fool Join Date: Jun 2006 Location: Forest Hill, MD Posts: 2,231	Re: long fleet bed and some doors ttt __________________ "it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board

05-12-2007, 06:44 PM	#19
centsless sufficiently talented fool Join Date: Jun 2006 Location: Forest Hill, MD Posts: 2,231	Re: long fleet bed and some doors Bed and fender sold to Evans!! Doors still available __________________ "it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board



Register or Log In To remove these advertisements.

05-12-2007, 10:23 PM	#20
Evans Registered User Join Date: Feb 2007 Location: Dallastown , Pa Posts: 261	Re: long fleet bed and some doors Thanks Bob !!! Everything made it back to PA in one pc. !!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.