![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: May 2006
Location: Springfield Illinois
Posts: 182
|
Harmonic Balancer Puller & Installer Set
I pulled my 292. Now it's time to strip the tin. I have a pully puller that hooks around and pulls on the sides. I heard that I shouldn't use this type but rather it is better to use a puller that treads into the HB itself. Like this one.
http://www.mytoolstore.com/wilmar/wtech06.html Harmonic Balancer Puller & Installer Set W89711 $73.75 For removal and installation of harmonic balancers on most automotive and light truck applications Master set: includes necessary bolts and adapters for most applications Bilingual instructions Replacement Part Availability However it is a little high priced. The one at Sears (sold out) is like 25-30 bucks, Do I get a 50 buck advantage but getting the one listed above? |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jan 2006
Location: Morro Bay C.A
Posts: 179
|
Re: Harmonic Balancer Puller & Installer Set
autozone will let you borrow one...
__________________
'69 C10 SWB 350 edelbrock int/carb .420 .442 cam 700r4 70 lwb c10 work truck 250 I6 with two inch lift springs and a two inch bodylift and 33/12.5s |
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: Harmonic Balancer Puller & Installer Set
that's about the same one i have a quality tool in my opinion is well worth the money// as far as the free tool programs at the chain stores if you add the time and expence running to pickup and dropoff as well as the fact that if you have an immediate need for one sometime at midnight well you're not saving a thing over the 30+year lifespan of the tool
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: May 2006
Location: Springfield Illinois
Posts: 182
|
Re: Harmonic Balancer Puller & Installer Set
After reading the posts about the problems folks can run into hammering on the HB I'm thinking it's worth the $. Hopefully, I'll still be goofing around with this stuff in 30 years or when I'm 80
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|