|
12-06-2002, 12:34 PM
|
#1 |
|
Registered User
Join Date: Dec 2002
Location: taylorsville, UT
Posts: 778
|
manual locking hubs
are manual locking hubs a direct bolt in replacement or is it more complicated than that
|
|
|
|
12-07-2002, 01:24 PM
|
#2 |
|
5 day ban, learn to behave.
Join Date: Nov 2002
Location: san diego, ca
Posts: 684
|
yep direct bolt in.
you probably have a full time 4wd truck, if you unlock the front hubs, you will to drive in "LOC" or you will go no where. Then only the rear wheels will be moving but the front driveshaft will still be turning. mike |
|
|
|
|
12-07-2002, 02:15 PM
|
#3 |
|
Gentleman Jim Driver
Join Date: Nov 2002
Location: Poulsbo, WA
Posts: 1,550
|
What vehicle are we talking about here?
If it is an 80's truck with an NP208 part time transfer case and you are swapping from auto hubs, yes its a direct swap. If its a 70's truck with full time 4wd as I think Mike was thinking, then what Mike said above is true but there is normally another piece to the puzzle. There is an adapter kit that is normally added to convert an np203 full time transfer case to a part time. If you don't do this and drive around in Hi-Loc like Mike said, you will always be turning the front driveshaft, differential, and axles. On my 84 K10, driving around with the hubs locked even in 2wd makes a noticable difference in drivetrain vibration and fuel economy. If you have the NP203 with full time 4wd, I would recommend going with the complete conversion kit rather than just a pair of hubs.
__________________
Joe '75 GMC Gentleman Jim '84 Chev C10 Short Wide - Super duper plain (manual steering, manual brakes, no dome light, no cig lighter) '85 Chev C10 Short Wide - Super plain Vortec 4.8 4L60E trans also: '81 K30, '83 C30 Crew Dually, '84 M1028 CUCV, '85 M1009 CUCV, another '85 C10 SWB, '89 R3500 Flatbed Last edited by ElGracho; 12-07-2002 at 02:19 PM. |
|
|
|
|
12-07-2002, 08:44 PM
|
#4 |
|
Registered User
Join Date: Nov 2002
Location: Spring TX
Posts: 113
|
If on the other hand you are replacing automatic hubs don't hesitate. Simple swap. WARN
__________________
350 Crate 10 bolt 3.73 2.5 lift 32x11.50 1904 Edelbrock http://www.oplnk.net/~spirit/K5front.jpg |
|
|
|
|
12-07-2002, 10:27 PM
|
#5 |
|
My other Love
Join Date: Aug 2001
Location: Castlegar B.C. Canada
Posts: 4,085
|
Its always good to replace the worn hubs with new warn hubs anyways
__________________
 Castlegar B.C.The great white North (Canada Eh!) Hooter_5@hotmail.com First generation Monte Carlo club pictures of my life |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
