![]() |
![]() |
#1 |
Registered User
Join Date: Jan 2007
Location: Athens, GA
Posts: 112
|
Engine Harness
I just bought a new engine harness and can't figure out a couple of the wires. I have the pink wire to dizzy, the two for the starter, and one running towards the brake booster all figured out, but there are three more wires (can't remember all the colors, ones blue) that I don't know where they go. I can only guess that they're for the AC, but I thought it ran off another harness.
So, does anyone have a diagram for the engine harness? Thanks. Ronnie
__________________
1968 C10 Stepside 396 bored .030 TH400 |
![]() |
![]() |
![]() |
#2 | |
Senior Member
Join Date: Aug 2005
Location: OKC, OK
Posts: 2,365
|
Re: Engine Harness
Quote:
Mike
__________________
Mike Redpath |
|
![]() |
![]() |
![]() |
#3 |
Questionable
Join Date: Mar 2005
Location: Atlanta
Posts: 13,376
|
Re: Engine Harness
99% sure the blue one is the oil dummy sender. one of the others might be the water temp dummy sender.
knowing the colors of the other wires is the only way i can help other than that.
__________________
If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM. |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jan 2007
Location: Athens, GA
Posts: 112
|
Re: Engine Harness
I'll have to look this weekend, I'm still working on the truck a couple hours drive away, so only work on the weekends. I wasn't smart enough at the time to write down the colors.
__________________
1968 C10 Stepside 396 bored .030 TH400 |
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: Engine Harness
i think theres a wiring diagram in the FAQ section /you might print it out for help when you get back to workin on it
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Feb 2006
Location: Gilbert, Az
Posts: 180
|
Re: Engine Harness
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Jan 2007
Location: Athens, GA
Posts: 112
|
Re: Engine Harness
Thanks, that helps a lot. I have mechanical temp and oil pressure, so that answers two of the unknowns. I noticed that there wasn't a wire going to the dizzy in the diagram
![]() Thanks. Ronnie
__________________
1968 C10 Stepside 396 bored .030 TH400 |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Feb 2006
Location: Gilbert, Az
Posts: 180
|
Re: Engine Harness
It looks like it could be the power to the main light on circuit board behind the instrument cluster. Only one of the lights has a wire going to it. The rest are in series connected by the copper wire in the circuit board or what ever it is called. I am about 85% sure, if I am wrong maybe some one else can clear it up.
|
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Feb 2006
Location: Gilbert, Az
Posts: 180
|
Re: Engine Harness
It could also be for the Licence plate light in the back. Now I am 50% sure.....LOL
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|