pics for rockln

[deer slayer]

here the pics of the problem i havingfile:///C:/Documents%20and%20Settings/All%20Users/Documents/My%20Pictures/Kodak%20Pictures/2007-06-19/100_1662.jpgfile:///C:/Documents%20and%20Settings/All%20Users/Documents/My%20Pictures/Kodak%20Pictures/2007-06-19/100_1666.jpg

[krue]

Pics don't work.

[deer slayer]

that dint work for some reason i cant browse my pics and select them
but ill try to explain it the best i canthe door side of the floor pan i know to cut the inner rocker of the patch ok done i left the little radius that meets the door jamb i cut and fited the kickpanel before the floor pan that and the pillar fit good now with the floor pan in not so good so the very bottom of the kickpanel and floor pan are to match upbut nothing fits likes it should iput the front of the pan where the factory did on that seem i bent it down and it is all welded it seems like the floor should be down about another 1 1/2 but i made it the same as the cut out piece so maybe some measurements from some point to the floor support im replacing that aswell and its not in yet im not sure if the patch panel is out of shape if i have to cut the floor back out thats $40 down the tubes the problem is the where they meet horizontaly i beat it with a hammer and i got he pillar to fit sorry i cant get pics right now maybe through email
thanks jeff