Valve covers Big Block - The 1947 - Present Chevrolet & GMC Truck Message Board Network

butter · 12-13-2002, 09:58 AM

I would like to see some Aluminum big block valve covers that fit with the power brake booster and I can send e-mail for someone to post a picture of my motor I just finished. Thanks

barn9 · 12-13-2002, 12:39 PM

If you have your engine pic saved on your puter, just use the browse button below, find the pic and post it, very easy to do. Here is a pic of my valve covers:

butter · 12-13-2002, 01:31 PM

Thanks Barn9 The pictures are to big and want let me change the size. I may can re-take them in a different size if I can figure it out thanks.

Big69C20 Toy · 12-13-2002, 02:23 PM

my only problem on my BB was with the A/C compressor, tall covers dont work with my bracket i guess...

Mike C · 12-13-2002, 09:17 PM

Here's mine, but notice the "riser" on my rear AC bracket in order to clear the vent hole of the GM Performance Parts covers. I orignally had tall aluminum ones that I think you could make work with a longer belt. I just like these better and don't need the clearance.

barn9 · 12-13-2002, 10:56 PM

I just eliminated that rear bracket, comp. is still rock solid, but I am keeping an eye on everything just to be safe.

Johns70 · 12-14-2002, 12:57 AM

anything real tall you have to go with the small booster

**breeh** · 12-14-2002, 01:37 AM

Here is another one...

**PICKMUP** · 12-14-2002, 04:11 AM

Nice GM covers! Where did you get those? Oh, from me...LOL. I have them on two of my trucks.

**PICKMUP** · 12-14-2002, 04:15 AM

I think I still have one more new set in the GM boxes with new oring seals for about $100. These in the pic have been belt sanded on top to give a billet look.

12-13-2002, 09:58 AM	#1
butter Registered User Join Date: Jan 2000 Location: Orange Beach, Alabama Posts: 133	Valve covers Big Block I would like to see some Aluminum big block valve covers that fit with the power brake booster and I can send e-mail for someone to post a picture of my motor I just finished. Thanks __________________ 71 cheyenne 402 th400 swb 71 camper special (PARTS TRUCK) 70 Stepside swb 350

12-13-2002, 12:39 PM	#2
barn9 Half a bubble off! Join Date: Jun 2000 Location: Winfield, Ks, USA Posts: 5,588	If you have your engine pic saved on your puter, just use the browse button below, find the pic and post it, very easy to do. Here is a pic of my valve covers: Attached Images __________________ Just call me LB. '71 Cheyenne, 402BB, hauls blondes, brunettes, or redheads.

12-13-2002, 01:31 PM	#3
butter Registered User Join Date: Jan 2000 Location: Orange Beach, Alabama Posts: 133	Thanks Barn9 The pictures are to big and want let me change the size. I may can re-take them in a different size if I can figure it out thanks. __________________ 71 cheyenne 402 th400 swb 71 camper special (PARTS TRUCK) 70 Stepside swb 350

12-13-2002, 02:23 PM	#4
Big69C20 Toy Livin' it up. Join Date: Nov 2001 Location: Richland, MI Posts: 2,212	my only problem on my BB was with the A/C compressor, tall covers dont work with my bracket i guess... __________________ -Greg; Sold the 69 C20. It's off to a better home with more love! Now onto the 86 CUCV M1009; K5 blazer with 6.2L diesel, corp 10 bolt axles, Detroit locker in the rear, trutrac front, 3.73 gears, 35" tires.

12-13-2002, 09:17 PM	#5
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,723	Here's mine, but notice the "riser" on my rear AC bracket in order to clear the vent hole of the GM Performance Parts covers. I orignally had tall aluminum ones that I think you could make work with a longer belt. I just like these better and don't need the clearance. __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax

12-13-2002, 10:56 PM	#6
barn9 Half a bubble off! Join Date: Jun 2000 Location: Winfield, Ks, USA Posts: 5,588	I just eliminated that rear bracket, comp. is still rock solid, but I am keeping an eye on everything just to be safe. __________________ Just call me LB. '71 Cheyenne, 402BB, hauls blondes, brunettes, or redheads.

12-14-2002, 12:57 AM	#7
Johns70 Registered User Join Date: Dec 2001 Location: Spring Creek, nevada. U.S.A. Posts: 456	anything real tall you have to go with the small booster Attached Images __________________ 69 chevy short wide box project 70 GMC jimmy project

12-14-2002, 01:37 AM	#8
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	Here is another one... Attached Images __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

12-14-2002, 04:11 AM	#9
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,144	Barns Covers Nice GM covers! Where did you get those? Oh, from me...LOL. I have them on two of my trucks. Attached Images __________________ Email: frankeham@comcast.net Phone: 360-956-7170

12-14-2002, 04:15 AM	#10
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,144	More I think I still have one more new set in the GM boxes with new oring seals for about $100. These in the pic have been belt sanded on top to give a billet look. Attached Images __________________ Email: frankeham@comcast.net Phone: 360-956-7170

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.