Will late model 3/4 ton wheels fit my 67 GMC? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mal68ibu · 07-03-2007, 06:01 PM

Anyone have any problems or even tried putting a set of these wheels out back on a dana equipped 3/4 truck? below is a link to a set on craigslist out here.
http://sfbay.craigslist.org/nby/pts/365754621.html

**John Fabris** · 07-03-2007, 06:13 PM

They will work. You will need to get these lug nuts from ebay as well to make it simple.... Ebay link

Here is my buddies 68 3/4 truck with them on...

**Joesjunk** · 07-03-2007, 06:18 PM

I have a set on a truck, with a Dana rear end you will need rear caps from a dually. I have an extra set of rear caps if you need them.

MXmaniac · 07-04-2007, 12:33 AM

My C-20 has wheels off an '06 GMC 2500HD. I got the lug nuts off ebay like John Fabris said.

**John Fabris** · 07-04-2007, 11:22 AM

Do a search on this board for pics of other trucks running these 2500HD wheels.... several threads on this.

There have been a couple threads regarding the fitting of the cap of over the rear hub as well...
The only complication that I have experienced with these rims is on a 67 3/4 ton chevy that had a one ton dana from a dogde van swapped in. The hub of that rear end was too big and the rim would not fit over it....

**Ricks1971** · 07-04-2007, 01:45 PM

I put these wheels on my 72 3/4 pickup. I got the lug nuts from stockton wheel as all the new stuff is metric and the old wheels take a 9/16 lug. As far as the rears go I had to find (2) 1 ton rear hub covers off ebay and then when I gor the hub covers I had to cut and put sleves on the plastic nut covers to make them long enough. It was some work but it looks good.

**Classic Heartbeat** · 07-04-2007, 01:55 PM

I have used them on several of the 67-72 trucks. You do have to do something with the rear cap though. Doesn't matter if the rear end is a dana or a corperate, they both are full floating axles. The hub and axle assembly just sticks out about 1/4" too far to be able to bolt the center caps down. I personaly do not like the duely cap on the rear because I think that it is too tall, and looks funny just sticking out. I take the center caps and cut the centers iut of them. Paint the end of the axle with silver ceramic paint then you can just bolt it on. You would be supprized how it just blends with the truck. WES

eedgell · 07-04-2007, 03:02 PM

Looks good Classic Heartbeat! What did you do for center caps on the front, cut them out?

dion · 07-04-2007, 03:07 PM

Are you dead set on those wheels? I just bought these off craigslist with tires for $150 Bolted right up and look great.

mal68ibu · 07-06-2007, 10:44 AM

Since I ended up purcashing the wheels off a 1000 mile truck i'm set. However I did buy a set of those Ford wheels you have on your truck a few months ago that I am now not going to use. To John, thank you a bunch, that is awsome. I will pass on your spare one ton center caps as the caps that came with mine are the new 07 variety and if they dont make a similar one ton rear I will be replaceing them all. Oh ya and I dont want to put chevy bowties on my GMC.
Adam

mal68ibu · 07-06-2007, 11:00 AM

Quote:

Originally Posted by Ricks1971

I put these wheels on my 72 3/4 pickup. I got the lug nuts from stockton wheel as all the new stuff is metric and the old wheels take a 9/16 lug. As far as the rears go I had to find (2) 1 ton rear hub covers off ebay and then when I gor the hub covers I had to cut and put sleves on the plastic nut covers to make them long enough. It was some work but it looks good.

Good local suggestion. Looks like I'm putting these on today. Here is a pic of the new center cap, or maybe just GMC specific one.

mal68ibu · 07-08-2007, 10:06 PM

Got it done thanx to the guys down at Stockton Wheel. Also found out that my upper ball joints are about to take a sh1t on me. So now I'm thinking disc brake swap. Anyone every put discs on their dana diff? Heres some pics of my original paint 67 GMC custom with its new wheels and rubber.

07-03-2007, 06:01 PM	#1
mal68ibu Parts Hunter Join Date: Oct 2006 Location: Sacramento Posts: 247	Will late model 3/4 ton wheels fit my 67 GMC? Anyone have any problems or even tried putting a set of these wheels out back on a dana equipped 3/4 truck? below is a link to a set on craigslist out here. http://sfbay.craigslist.org/nby/pts/365754621.html __________________ 1968 Chevelle 300 DLX (350 4 speed) 1984 GMC 2500 6.2, 700r4 work truck 1967 GMC Custom (was 6.5 Turbo Diesel powered) My ebay Store: http://stores.ebay.com/The-Musclecar...3aFQ3aSTQQtZkm My website:http://themusclecarshop.net/ 1967 GMC 6.5 TD conversion build:http://67-72chevytrucks.com/vboard/s...d.php?t=290922

07-03-2007, 06:13 PM	#2
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: Will late model 3/4 ton wheels fit my 67 GMC? They will work. You will need to get these lug nuts from ebay as well to make it simple.... Ebay link Here is my buddies 68 3/4 truck with them on... __________________ John Fabris 67 C10 SWB

07-03-2007, 06:18 PM	#3
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,702	Re: Will late model 3/4 ton wheels fit my 67 GMC? I have a set on a truck, with a Dana rear end you will need rear caps from a dually. I have an extra set of rear caps if you need them. Attached Images __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

07-04-2007, 12:33 AM	#4
MXmaniac Registered User Join Date: Jan 2007 Location: Denton, Texas Posts: 356	Re: Will late model 3/4 ton wheels fit my 67 GMC? My C-20 has wheels off an '06 GMC 2500HD. I got the lug nuts off ebay like John Fabris said. __________________ Andrew '69 C-20(292, 4-speed) Retired Daily Driver '64 C-10(250, 3-speed) Fixerupper '97 F*rd Mustang GT(4.6L, 5-speed) Daily Driver If I only wanted two pedals I'd have bought a bicycle.

07-04-2007, 11:22 AM	#5
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: Will late model 3/4 ton wheels fit my 67 GMC? Do a search on this board for pics of other trucks running these 2500HD wheels.... several threads on this. There have been a couple threads regarding the fitting of the cap of over the rear hub as well... The only complication that I have experienced with these rims is on a 67 3/4 ton chevy that had a one ton dana from a dogde van swapped in. The hub of that rear end was too big and the rim would not fit over it.... __________________ John Fabris 67 C10 SWB Last edited by John Fabris; 07-06-2007 at 02:46 PM.

07-04-2007, 01:45 PM	#6
Ricks1971 Senior Member Join Date: Mar 2006 Location: Clarkrange Tennessee Posts: 1,787	Re: Will late model 3/4 ton wheels fit my 67 GMC? I put these wheels on my 72 3/4 pickup. I got the lug nuts from stockton wheel as all the new stuff is metric and the old wheels take a 9/16 lug. As far as the rears go I had to find (2) 1 ton rear hub covers off ebay and then when I gor the hub covers I had to cut and put sleves on the plastic nut covers to make them long enough. It was some work but it looks good.

07-04-2007, 01:55 PM	#7
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,768	Re: Will late model 3/4 ton wheels fit my 67 GMC? I have used them on several of the 67-72 trucks. You do have to do something with the rear cap though. Doesn't matter if the rear end is a dana or a corperate, they both are full floating axles. The hub and axle assembly just sticks out about 1/4" too far to be able to bolt the center caps down. I personaly do not like the duely cap on the rear because I think that it is too tall, and looks funny just sticking out. I take the center caps and cut the centers iut of them. Paint the end of the axle with silver ceramic paint then you can just bolt it on. You would be supprized how it just blends with the truck. WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

07-04-2007, 03:02 PM	#8
eedgell It's the air up here Join Date: Mar 2007 Location: Western Colorado Posts: 710	Re: Will late model 3/4 ton wheels fit my 67 GMC? Looks good Classic Heartbeat! What did you do for center caps on the front, cut them out? __________________ 1971 cheyenne k10 4 speed np 205 454 BB factory a/c Never drink down stream of the herd! Eric

07-04-2007, 03:07 PM	#9
dion 72 Cheyenne Join Date: Oct 2001 Location: San Diego Posts: 2,086	Re: Will late model 3/4 ton wheels fit my 67 GMC? Are you dead set on those wheels? I just bought these off craigslist with tires for $150 Bolted right up and look great. __________________ Burnout Idle 1972Cheyenne 1966/67Stouts

07-06-2007, 10:44 AM	#10
mal68ibu Parts Hunter Join Date: Oct 2006 Location: Sacramento Posts: 247	Re: Will late model 3/4 ton wheels fit my 67 GMC? Since I ended up purcashing the wheels off a 1000 mile truck i'm set. However I did buy a set of those Ford wheels you have on your truck a few months ago that I am now not going to use. To John, thank you a bunch, that is awsome. I will pass on your spare one ton center caps as the caps that came with mine are the new 07 variety and if they dont make a similar one ton rear I will be replaceing them all. Oh ya and I dont want to put chevy bowties on my GMC. Adam __________________ 1968 Chevelle 300 DLX (350 4 speed) 1984 GMC 2500 6.2, 700r4 work truck 1967 GMC Custom (was 6.5 Turbo Diesel powered) My ebay Store: http://stores.ebay.com/The-Musclecar...3aFQ3aSTQQtZkm My website:http://themusclecarshop.net/ 1967 GMC 6.5 TD conversion build:http://67-72chevytrucks.com/vboard/s...d.php?t=290922

07-08-2007, 10:06 PM	#12
mal68ibu Parts Hunter Join Date: Oct 2006 Location: Sacramento Posts: 247	Re: Will late model 3/4 ton wheels fit my 67 GMC? Got it done thanx to the guys down at Stockton Wheel. Also found out that my upper ball joints are about to take a sh1t on me. So now I'm thinking disc brake swap. Anyone every put discs on their dana diff? Heres some pics of my original paint 67 GMC custom with its new wheels and rubber. Attached Images __________________ 1968 Chevelle 300 DLX (350 4 speed) 1984 GMC 2500 6.2, 700r4 work truck 1967 GMC Custom (was 6.5 Turbo Diesel powered) My ebay Store: http://stores.ebay.com/The-Musclecar...3aFQ3aSTQQtZkm My website:http://themusclecarshop.net/ 1967 GMC 6.5 TD conversion build:http://67-72chevytrucks.com/vboard/s...d.php?t=290922

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.