Father/son pics part 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevyboy55 · 07-15-2007, 01:48 PM

Here's more

chevguy7 · 07-15-2007, 02:59 PM

Very nice! What color blue is that?

bad6772 · 07-15-2007, 03:01 PM

hey chevy. great looking truck. what gas tank are you useing? any tips on doing it? im still in the tear down proccess, but the chasis and cab are going to media blasting one day next week , and id love to do that gas door and tank install? thanks tony

FRENCHBLUE72 · 07-15-2007, 03:05 PM

Beautiful truck....wow

**Already Gone** · 07-15-2007, 03:32 PM

Juicy truck !! It sits and looks like it should. I too am very interested in how you did the gas filler . I have an ECE tank sitting in the garage since 2003 and am ready to try and install it myself after having been quoted 1000/1500 over the years to have it done by different shops. I know there is a FAQ on installing a filler door on a stepside fender but havent seen one on a fleetside.

Longhorn Man · 07-15-2007, 03:36 PM

that blue looks totally killer. Sweet job.
On the fillers in the side marker, do you have any problems when filling, like having to pump slow or anything, or is it simply stick it in and hold the handle wide open?

chevyboy55 · 07-15-2007, 08:14 PM

Quote:

Originally Posted by chevguy7

Very nice! What color blue is that?

Not sure of what color the blue is,he just sat outside at the painters with about 7 chip books & thumbed through until he found one he liked.

chevyboy55 · 07-15-2007, 08:25 PM

Already gone & longhorn man.
The filler was a pain in the rear but worth it,if only for the fact that when I was driving it the other day & was getting gas a guy kept looking my way & was staring at it with a look kinda like "I'm not sure you usually fill them through the light" As far as taking gas,we relocated the fill neck on the tank to give it a straighter shot & made sure that the vent tube was up high so gas would not get into it.So in answer to your question,yes, you can put the nozzle in & let er rip wide open.I have more pics of the tank if you need them.The tank is just a counterpart tank kit from Wes @ classic heartbeat.
Here's a link to a FAQ on it from Wes' site. http://www.classicheartbeat.com/mark...t_gas_door.htm

bad6772 · 07-15-2007, 08:55 PM

thanks chevy i will be looking into this for shure

PanelDeland · 07-15-2007, 09:00 PM

A member who is inactive did that mod.It was the first I had seen.Tennman.I know he has lots of hobbies,Harleys,airplanes(experimental/homebuilt),and runs a tire business.Last I heard he was in the market for another truck project.I believe he did the write up on WES's site.There have been a few since then and they have probably refined it and made it easier.Here's a TTT to see if they respond.

07-15-2007, 01:48 PM	#1
chevyboy55 Senior Member Join Date: Aug 2004 Location: Kelso,Wa Posts: 3,637	Father/son pics part 2 Here's more Attached Images __________________ Great minds think alike,So do ours

07-15-2007, 02:59 PM	#2
chevguy7 Registered User Join Date: Oct 2006 Location: Washington Posts: 316	Re: Father/son pics part 2 Very nice! What color blue is that?

07-15-2007, 03:01 PM	#3
bad6772 Official Site Guitar Shredder Join Date: May 2006 Location: Oz Posts: 3,955	Re: Father/son pics part 2 hey chevy. great looking truck. what gas tank are you useing? any tips on doing it? im still in the tear down proccess, but the chasis and cab are going to media blasting one day next week , and id love to do that gas door and tank install? thanks tony

07-15-2007, 03:05 PM	#4
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Father/son pics part 2 Beautiful truck....wow __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-15-2007, 03:32 PM	#5
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,139	Re: Father/son pics part 2 Juicy truck !! It sits and looks like it should. I too am very interested in how you did the gas filler . I have an ECE tank sitting in the garage since 2003 and am ready to try and install it myself after having been quoted 1000/1500 over the years to have it done by different shops. I know there is a FAQ on installing a filler door on a stepside fender but havent seen one on a fleetside. __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

07-15-2007, 03:36 PM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Father/son pics part 2 that blue looks totally killer. Sweet job. On the fillers in the side marker, do you have any problems when filling, like having to pump slow or anything, or is it simply stick it in and hold the handle wide open?

07-15-2007, 08:25 PM	#8
chevyboy55 Senior Member Join Date: Aug 2004 Location: Kelso,Wa Posts: 3,637	Re: Father/son pics part 2 Already gone & longhorn man. The filler was a pain in the rear but worth it,if only for the fact that when I was driving it the other day & was getting gas a guy kept looking my way & was staring at it with a look kinda like "I'm not sure you usually fill them through the light" As far as taking gas,we relocated the fill neck on the tank to give it a straighter shot & made sure that the vent tube was up high so gas would not get into it.So in answer to your question,yes, you can put the nozzle in & let er rip wide open.I have more pics of the tank if you need them.The tank is just a counterpart tank kit from Wes @ classic heartbeat. Here's a link to a FAQ on it from Wes' site. http://www.classicheartbeat.com/mark...t_gas_door.htm __________________ Great minds think alike,So do ours

07-15-2007, 08:55 PM	#9
bad6772 Official Site Guitar Shredder Join Date: May 2006 Location: Oz Posts: 3,955	Re: Father/son pics part 2 thanks chevy i will be looking into this for shure

07-15-2007, 09:00 PM	#10
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: Father/son pics part 2 A member who is inactive did that mod.It was the first I had seen.Tennman.I know he has lots of hobbies,Harleys,airplanes(experimental/homebuilt),and runs a tire business.Last I heard he was in the market for another truck project.I believe he did the write up on WES's site.There have been a few since then and they have probably refined it and made it easier.Here's a TTT to see if they respond. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.