repacking front wheel bearings - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cell · 07-16-2007, 01:14 PM

Hey guys,

I am repacking my front wheel bearings and I have a question.

In between the inner and outer bearing races on the brake rotor, there is a cavity or pocket which was entirely filled with grease when I took the front wheel apart.

Do I need to refill that pocket full of grease, or do I just pack the bearings with grease?

cdowns · 07-16-2007, 01:53 PM

just the bearings and it doesnt hurt to have a light coat of grease on the whole length of the spindle

07-16-2007, 01:14 PM	#1
cell Active Member Join Date: Nov 2005 Location: Austin Posts: 217	repacking front wheel bearings Hey guys, I am repacking my front wheel bearings and I have a question. In between the inner and outer bearing races on the brake rotor, there is a cavity or pocket which was entirely filled with grease when I took the front wheel apart. Do I need to refill that pocket full of grease, or do I just pack the bearings with grease?

07-16-2007, 01:53 PM	#2
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: repacking front wheel bearings just the bearings and it doesnt hurt to have a light coat of grease on the whole length of the spindle __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.