![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Apr 2004
Location: Clanton, AL
Posts: 1,253
|
How to keep gasket in place when replacing oil pan?
Hey Guys,
I'm looking for any tips/suggestions on how to keep the oil pan gasket in place when replacing with the engine still in place. I've got a feeling that whole gravity thing is going to make things difficult. John O>.
__________________
85' CUCV M1009!!! The newest addition! 6.2diesel, Th400, NP208, & only 36k miles! 70' C-10 LWB Fleetside - Looking good these days! ![]() 05' Dodge Neon 88' Winner Escape Sport 1750 - 4.3v6 94' Seadoo SP 84' Honda TRX200, bare nekkid. Just a frame & tires. Always looking for another project or any good deal! ![]() |
![]() |
![]() |
![]() |
#2 |
Account Suspended
Join Date: Dec 2005
Posts: 114
|
Re: How to keep gasket in place when replacing oil pan?
rtv
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Mar 2007
Location: Ben Wheeler,Texas
Posts: 992
|
Re: How to keep gasket in place when replacing oil pan?
Buy a (1) piece gasket. Instead of rtv, they sell some brush on stuff at the parts store that is a gasket adhesive, really cheap and works well.
__________________
05 2500HD 6.0 excab 69 LWB-Gone but not forgotten! 68 Dodge Charger 383/727 69 Dodge Charger-440/4spd |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Mar 2007
Location: VANCOUVER ISLAND, B.C., Canada
Posts: 1,602
|
Re: How to keep gasket in place when replacing oil pan?
I prefer the one piece gaskets myself. I know they cost more but they are a whole lot less frustrating.
I don't know of a magic way to install a standard set. Just make sure you do not over tighten as this can cause the front and rear gaskets to move and create a bad seal. Torque to 10#. esll. ![]()
__________________
Tomorrow is for doing today's stuff. ![]() ************************************* This truck has just the right amount of energy for me! ![]() Author: Warren Lake .... (member) |
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: How to keep gasket in place when replacing oil pan?
permatex aviation form-a-gasket// i too prefer to spend the extra for the 1piece gaskets
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
![]() |
![]() |
![]() |
#6 |
Active Member
![]() Join Date: Jul 2007
Location: Centrally located between Houston, Austin and Waco. BCS area.
Posts: 7,947
|
Re: How to keep gasket in place when replacing oil pan?
This is the way I do it and have been doing it for the last few times I've taken the oil pan out...
I take the pan off and clean the gasket surface real good with a flat blade scraper that I picked up (and of course clean the engine side also). I make sure the pan surface is flat. Then I put a bead of gasket adhesive or sealant to the oil pan only.. Buy a good quality gasket and lay it on the pan and use the bolts to insure it's in place and let it set/dry until it doesn't move. Sometimes an hour or more depending on the time that I have. I've had good luck doing it this way and when I do remove the oil pan again, the gasket stays on the pan... Last edited by 68gmsee; 08-09-2007 at 10:13 AM. Reason: sequence... |
![]() |
![]() |
![]() |
#7 |
Senior Member
![]() Join Date: Sep 2005
Location: Lewisville, Nc
Posts: 10,234
|
Re: How to keep gasket in place when replacing oil pan?
thin layer of rtv
__________________
David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Mar 2007
Location: Ben Wheeler,Texas
Posts: 992
|
Re: How to keep gasket in place when replacing oil pan?
One thing to do as well is tighten the front two and rear bolts hand tight first. I was told that by my mechanic buddy and it really helped the 4 pc. stay in one spot while bolting it down. He uses the yellow "monkey snot" stuff, it works real well too. You know you will have to raise the motor up with a engine hoist for the pan to clear the front main too.
__________________
05 2500HD 6.0 excab 69 LWB-Gone but not forgotten! 68 Dodge Charger 383/727 69 Dodge Charger-440/4spd Last edited by OLDIRON69; 08-09-2007 at 11:00 AM. |
![]() |
![]() |
![]() |
#9 |
Senior Member
Join Date: Apr 2005
Location: Joppa, Maryland
Posts: 4,408
|
Re: How to keep gasket in place when replacing oil pan?
__________________
1997 GMC Sierra Ext 1965 Mustang |
![]() |
![]() |
![]() |
#10 |
Member
![]() Join Date: Jan 2007
Location: Manchester, Iowa
Posts: 1,493
|
Re: How to keep gasket in place when replacing oil pan?
The last Fel Pro 1 piece gasket I bought came with 4 plastic clips to hold the gasket in place. I did not use them though, I had the motor out.
|
![]() |
![]() |
![]() |
#11 |
Spanked once
![]() Join Date: Oct 2006
Location: Intheshop, Indiana
Posts: 969
|
Re: How to keep gasket in place when replacing oil pan?
Valve covers and pans , I have been using thread for years to tie them on and just snip off the access when done.
|
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Feb 2007
Location: Mt. Sterling, Ky.
Posts: 205
|
Re: How to keep gasket in place when replacing oil pan?
I have used string or zip ties to hold gaskets in place while installing back on engine. Just run a few in the bolt holes evenly around the pan (not every hole), after getting pan back in place, attach to engine by placing a few bolts in the holes without string or zip ties. Tip - do not tighten string or zip ties leaving loose just enough to be able to cut out with what ever means available. Afterward finish installing remaining bolts, tighten to specific torque. Don't forget to fill with oil afterward. hahaha!!!
Good luck! Eric |
![]() |
![]() |
![]() |
#13 |
Dave's not here, man
Join Date: Jun 2004
Location: Winder, Georgia
Posts: 2,000
|
Re: How to keep gasket in place when replacing oil pan?
I too have the FelPro one piece. It's a little spendy but well worth the money and easy to install.
__________________
- 2014 VW Jetta - 2015 VW Jetta - 1966 Ford F-250 |
![]() |
![]() |
![]() |
#14 |
Registered User
![]() Join Date: Nov 2006
Location: KINGSPORT,TN.
Posts: 3,035
|
Re: How to keep gasket in place when replacing oil pan?
use 3M weather strip adhesive on pan side of gasket, after glueing gasket on pan turn pan over and let set for about an hour. it will stay in place for the rest of your life....... they dont call it gorilla snot for nothing.
bob
__________________
I BELIEVE IN JOHN 3:16 |
![]() |
![]() |
![]() |
#15 |
Registered User
Join Date: Jul 2006
Location: Fair Oaks, CA
Posts: 475
|
Re: How to keep gasket in place when replacing oil pan?
Little bit of rtv, make sure u peen the holes with a ball peen hammer before re installing pan
__________________
1968 Short Fleet 350/700r4 http://67-72chevytrucks.com/vboard/s...d.php?t=249435 1997 Bagged XtdCab Vortec350/4L60e http://67-72chevytrucks.com/vboard/s...44#post2286144 1993 XtdCab Longbed 4x4 6.5Turbo/NV4500 "Daily Driver" 1985 Toyota XtdCab 4x4 22re/W-56/Dual T-cases, Doug Thorley Header, Homebrew front and rear spring packs, Tons of Mods to suspension and drivetrain, 35" boggers, coming soon ARB's and 5.29's, Possible 4.3/700r4 swap |
![]() |
![]() |
![]() |
#16 |
Resident Absorber
Join Date: Mar 2007
Location: WI
Posts: 131
|
Re: How to keep gasket in place when replacing oil pan?
I use this, Fel Pro part number OS34510T. it comes with these 4 snap things that screw into the block. put your gasket in place, then snap the pan in place. install some bolts, then remove the snap things. easy japaneesy.
__________________
The best offense is a better DEFENSE! |
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: Jun 2007
Location: mississippi
Posts: 181
|
Re: How to keep gasket in place when replacing oil pan?
buy yourself four "studs " to replace the bolts on the front and rear corners. perferably one inch , that way you can set the pan up with nuts and have room to make sure all is straight then ease it up evenly
__________________
"spiiiider pig, spiiiiider pig, does whatever spiiiider pig does. " |
![]() |
![]() |
![]() |
#18 |
Senior Member
![]() Join Date: Nov 2001
Location: Rapid City, SD
Posts: 2,281
|
Re: How to keep gasket in place when replacing oil pan?
spray the gasket with COPPER-COAT SPRAY before installing on pan, then put your first bolt in as you lift... I've got one arm and it works for me.
__________________
My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White |
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: Apr 2006
Location: oklahoma
Posts: 10,670
|
Re: How to keep gasket in place when replacing oil pan?
|
![]() |
![]() |
![]() |
#20 |
Special Order
![]() ![]() Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,858
|
Re: How to keep gasket in place when replacing oil pan?
I use 3M weatherstrip adhesive.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
![]() |
![]() |
![]() |
#21 |
Registered User
Join Date: Apr 2004
Location: Clanton, AL
Posts: 1,253
|
Re: How to keep gasket in place when replacing oil pan?
I ended up using RTV. I forget how sticky that stuff is... especially when its 103 degrees out!
__________________
85' CUCV M1009!!! The newest addition! 6.2diesel, Th400, NP208, & only 36k miles! 70' C-10 LWB Fleetside - Looking good these days! ![]() 05' Dodge Neon 88' Winner Escape Sport 1750 - 4.3v6 94' Seadoo SP 84' Honda TRX200, bare nekkid. Just a frame & tires. Always looking for another project or any good deal! ![]() |
![]() |
![]() |
![]() |
#22 |
Senior Member
Join Date: Jul 2002
Location: Champaign, IL
Posts: 1,397
|
Re: How to keep gasket in place when replacing oil pan?
The one piece gasket with the enclosed plastic studs is the way to go if the engine is in the vehicle. I'm sure the other methods using RTV work well. The one piece gasket is supposed to be re-useable too.
__________________
Baby Blue's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=652776 Project 68's Build Thread: http://67-72chevytrucks.com/vboard/s...17#post8442117 www.stonecolumnclassics.com Email: Josh@stonecolumnclassics.com |
![]() |
![]() |
![]() |
#23 |
Registered User
Join Date: Apr 2004
Location: Clanton, AL
Posts: 1,253
|
Re: How to keep gasket in place when replacing oil pan?
I think I'll go 1 piece next time. I already had a old style gasket set in the garage & couldn't bring myself to spend the $.
__________________
85' CUCV M1009!!! The newest addition! 6.2diesel, Th400, NP208, & only 36k miles! 70' C-10 LWB Fleetside - Looking good these days! ![]() 05' Dodge Neon 88' Winner Escape Sport 1750 - 4.3v6 94' Seadoo SP 84' Honda TRX200, bare nekkid. Just a frame & tires. Always looking for another project or any good deal! ![]() |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|