The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > The 1973-1987 Chevrolet & GMC Pickups Parts Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-08-2002, 05:02 PM   #1
Desert Rat
Senior Member
 
Desert Rat's Avatar
 
Join Date: Dec 1999
Location: Darrington, Washington
Posts: 3,963
79 Blazer 2wd Big Block trade for 4x4

Have a originally 100% rust free79 Blazer 2wd , Fresh 2001 Chevy Autumn Wood Paint was lightened for more of a Champagne color,hasnt even been on road since paint,has very clean and painted engine compartment,402 CI Big Block,Holley Intake,Brand new delbrock carb,new Alt,starter,dist,water,fuel pump,all belts,hoses,has factory AC needs charged,new tailights,NOS headlamp bezels,new grille,and upper and lower grille moldings,new back bumper,has ralleys,3.42 gears,T350 trans,Blazer was painted inside and out so it needs new carpet,weatherstrip,seats have 1 tear(tan)has tilt,have a tach dash,i had side chrome welded up,still have chrome and all the old used parts,has a 72 Chevy truck 4 core radiator,good radiator but needs a 73 up one to fit right,needs,weatherstrip,carpet,exhaust.then its basically done and worth $7500-$8500 i wanted $5-$6000 for it,but i need a 4x4 67-87 Truck,Blazer,Suburban of equal value,or more and i come up with cash,less you come up with cash,depends what you got.lets talk,trade.I need something for my Desert hunting,and to lift and do rock climbing,mountain climbing,going through sandy washes,Email me.please no PMs
Desert Rat is offline   Reply With Quote
Old 11-08-2002, 06:27 PM   #2
87gmc
I Got My Engine!!!!!
 
87gmc's Avatar
 
Join Date: Oct 2002
Location: Palmer, AK
Posts: 253
if your looking to get some replys, it might help if you has some pictures to post. Sounds really nice though.
__________________
F.O.R.D.
"F*cked Over Rebuilt Dodge"
-+-+-+-+Cameron+-+-+-+-
1987 GMC HIGH SIERRA LWB 1500

32X11.50
383 TBI/Vortec Heads/Intake
MSD Ignition
Dual Exhaust
Custom Pinstriping
Sweet interior & stereo
http://www.cgalvin29.freehomepage.com
87gmc is offline   Reply With Quote
Old 11-09-2002, 12:26 AM   #3
Desert Rat
Senior Member
 
Desert Rat's Avatar
 
Join Date: Dec 1999
Location: Darrington, Washington
Posts: 3,963
I figure if someones intrested they will email me and we can trade pictures.
Desert Rat is offline   Reply With Quote
Old 11-20-2002, 03:01 AM   #4
littlebubba
Registered User
 
Join Date: Jun 2002
Location: Clinton Twp., Michigan
Posts: 321
2wd Blazer question

Hey Rat; littlebubba in Michigan. That boneyard 2WD Blazer you told me about awhile back , is it still around and for sale? Talked with a guy today from here, coming out there to bring back cars and parts, says he can bring it back for me, if you can tell me where its at, or info. I'd appreciate the help.
littlebubba is offline   Reply With Quote
Old 12-14-2002, 11:44 PM   #5
Desert Rat
Senior Member
 
Desert Rat's Avatar
 
Join Date: Dec 1999
Location: Darrington, Washington
Posts: 3,963
Heres some pics it looks alot nicer in person,its been sitting and i havent started it since i put motor in over 6 months ago,otherwise theres no grease oil etc,its just grody looking from the AZ dust,i have the AC brackets,pump,BB shroud,not missing anything.needs a correct year radiator.open to offers.ill knock price down a grand.I want it to move,if i start driving it ill want to keep it.and i got more favorite year trucks to finish.This is a before paint,and before i dismantled.
Attached Images
 
Desert Rat is offline   Reply With Quote
Old 12-14-2002, 11:46 PM   #6
Desert Rat
Senior Member
 
Desert Rat's Avatar
 
Join Date: Dec 1999
Location: Darrington, Washington
Posts: 3,963
motor right before install
Attached Images
 
Desert Rat is offline   Reply With Quote
Old 12-14-2002, 11:48 PM   #7
Desert Rat
Senior Member
 
Desert Rat's Avatar
 
Join Date: Dec 1999
Location: Darrington, Washington
Posts: 3,963
Right after it came home from being painted.
Attached Images
 
Desert Rat is offline   Reply With Quote
Old 12-14-2002, 11:49 PM   #8
Desert Rat
Senior Member
 
Desert Rat's Avatar
 
Join Date: Dec 1999
Location: Darrington, Washington
Posts: 3,963
Crappy night shot
Attached Images
 
Desert Rat is offline   Reply With Quote
Old 12-14-2002, 11:54 PM   #9
Desert Rat
Senior Member
 
Desert Rat's Avatar
 
Join Date: Dec 1999
Location: Darrington, Washington
Posts: 3,963
Heres a pic of motor its at night and pic makes it looks like crap,if hosed off,or blown off its spotless,a few minor changes have been made,wires and houses routed right,valve covers now factory chrome drippers,replaced some things with new.Actually every accessory is now new.Inner fenders not yet installed,they are mirror finish gloss black(not poof canned)ps pump reservoir has correct bracket so it dont sit at angle now etc.its changed for better.Ill try to get some nicer pics up.
Desert Rat is offline   Reply With Quote
Old 12-14-2002, 11:55 PM   #10
Desert Rat
Senior Member
 
Desert Rat's Avatar
 
Join Date: Dec 1999
Location: Darrington, Washington
Posts: 3,963
ooops i guess pic would help.
Attached Images
 
Desert Rat is offline   Reply With Quote
Old 12-14-2002, 11:59 PM   #11
Desert Rat
Senior Member
 
Desert Rat's Avatar
 
Join Date: Dec 1999
Location: Darrington, Washington
Posts: 3,963
littlebubba i bought that Blazer and its long gone it had a sweet body,i can sell a different one thats missing parts,has some minor rust. for around $1000 its a major project.i was gonna keep it,and thought about a tubbed drag race blazer would be cool,but need to be realistic and finish what i got,i dont even want to finish the Blazer i have right now.thats one reason im selling,and if i start driving it ill want to keep it,and my heart belongs on the 67-72 side.
Desert Rat is offline   Reply With Quote
Old 12-15-2002, 01:16 AM   #12
low 84
Registered User
 
low 84's Avatar
 
Join Date: Jan 2002
Location: Houston, TX
Posts: 2,144
man if you were in the area i would be very tempted to try to sell my truck to buy your blazer. i would love to get a hold of that thing. not gonna happen on my college budget though
__________________
'51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works

'05 1500 Crew Cab

RIP
'84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker
'80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's
low 84 is offline   Reply With Quote
Old 12-15-2002, 01:15 PM   #13
Desert Rat
Senior Member
 
Desert Rat's Avatar
 
Join Date: Dec 1999
Location: Darrington, Washington
Posts: 3,963
I wish you did to!!! quit college sell your truck come a state over and take a Blazer.Any trades/part trades?????Im motivated seller.OBO
Desert Rat is offline   Reply With Quote
Old 12-17-2002, 04:49 PM   #14
Desert Rat
Senior Member
 
Desert Rat's Avatar
 
Join Date: Dec 1999
Location: Darrington, Washington
Posts: 3,963
$4000 obo and it can leave as it sits and i wont touch it and ill fill it with extra parts.needs exhaust to be driveable i have some old exhaust of a BB blazer that would work if you want to bolt it up,you can take tht 2,i have 2 extra used grilles,doors,set of side chrome,extra bumper,seats,bezels,tach dash,and other misc.I havent drove since motor put in or painted,been sitting in same spot over 6 months,i have lost intrest,dont really care for the year.cash,part trades,67-72's any year 4x4,guns,gold dont matter.need 2 vehicles gone.
Desert Rat is offline   Reply With Quote
Old 12-17-2002, 08:02 PM   #15
low 84
Registered User
 
low 84's Avatar
 
Join Date: Jan 2002
Location: Houston, TX
Posts: 2,144
someone buy this truck, i'm getting so tempted, i think if i didn't have to make tuition payments next symester i would buy it
__________________
'51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works

'05 1500 Crew Cab

RIP
'84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker
'80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's
low 84 is offline   Reply With Quote
Old 12-17-2002, 08:47 PM   #16
low 84
Registered User
 
low 84's Avatar
 
Join Date: Jan 2002
Location: Houston, TX
Posts: 2,144
i posted a link to this on another board where i thought some people might be interested and your email addy has been requested. can you give it to me to pass along
__________________
'51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works

'05 1500 Crew Cab

RIP
'84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker
'80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's
low 84 is offline   Reply With Quote
Old 12-18-2002, 10:58 AM   #17
AirDaddy
Registered User
 
Join Date: Aug 2002
Posts: 12
Hmmmm.. So how much work to make it a runner to get it to Atlanta?
If your interested in a 2wd...



And it is bagged...
I'm looking to get rid of mine to start a new one and I have been interested in the blazer for a long while....
Maybe if I actually get mine gone I'll get yours..
__________________
Sean
AirDaddy is offline   Reply With Quote
Old 12-18-2002, 10:48 PM   #18
Desert Rat
Senior Member
 
Desert Rat's Avatar
 
Join Date: Dec 1999
Location: Darrington, Washington
Posts: 3,963
Air Daddy,Id be more interested definently in your truck than my Blazer id like to know more im a 67-72 fan,and my favorite is a 68 and it appears you have one,email me tell me more.what it would take is Exhaust(quoted at local shop $250 for aluminized 2 1/2" with Dynomax mufflers,it was few bucks cheaper with Turbos)or i have some exhaust off a BB Blazer someone scabbed together that could be used it has the mufflers under seat area and exits infront of tires they had it held up with chains and bailing wire on the other Blazer i had,but with some hangers or for cheapness bailing wire would make it work i guess,cheesy but if saving money would get home.Since i put motor in i havent started it,has a new battery,carb never run,all the accessories are new,dump in Antifreeze,seats are just sitting in it,bolt them down,the radiator is scabbed in there its from a 72 and dont fit quite right but its a bood radiator fron a 72 402 truck.its held down,i have the correct BB shroud for a Blazer in truck.tires are good enough for trip.be alot of wistle all the weatherstrip was removed to paint every nook and cranny,no carpet so alot of road noise,i have 50 foot roll of jute padding would help.Ask me some questions ill try to answer,id like to hear more about your truck.email me at gmcrat427@yahoo.com i can take nicer pics this weekend.or i can email phone number and we can talk.Thanks-Rat
Desert Rat is offline   Reply With Quote
Old 12-18-2002, 10:52 PM   #19
Desert Rat
Senior Member
 
Desert Rat's Avatar
 
Join Date: Dec 1999
Location: Darrington, Washington
Posts: 3,963
low 84 any trading material part trade,straight across,you money,i throw in money.Talk to me,sounds like you want one bad,im easy to work with and motivated.trade 64-87 Trucks 2wd need a 4x4 truck,Blazer,Burb, Guns,Gold,Diamonds,Women(LOL)let me clear that with wife,also im into snakes believe it or not id trade for certain snakes.
Desert Rat is offline   Reply With Quote
Old 12-19-2002, 04:13 PM   #20
AirDaddy
Registered User
 
Join Date: Aug 2002
Posts: 12
E-mail sent...
__________________
Sean
AirDaddy is offline   Reply With Quote
Old 12-21-2002, 01:37 AM   #21
Desert Rat
Senior Member
 
Desert Rat's Avatar
 
Join Date: Dec 1999
Location: Darrington, Washington
Posts: 3,963
Well i have 3 weeks off from work for Christmas break,think its gonna get headers,3" tubes and Flowmasters,and NOS.and im gonna see what the 1/4 times are.and hopefully in this time span get the drop spindles 3" and 2" springs and a 7" drop for rear.or bags.maybe do the carpet and weatherstrip.so its done.soon as exhaust,weatherstrip and carpet are done,and i put on new tires,and do some other things it will still be for sale.then.depends how far i go.figure extra $1000 for drop spindles,springs,leafs,cnotch,if i put of NOS ill remove and save for my 67 but if want that to add in actual cost and ill leave it i want to push this in the 12's.by the way it does have a 3.42 posi going in,and will be replacing T350 with a B&M T400. dump way it sits for $4000 or end up $7500 and up.who knows maybe it will end up with the new 468 sooner its gone cheaper it will be.
Desert Rat is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:35 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com