free cab roof - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nplocoman · 08-10-2007, 09:03 PM

Any one want this or parts of it? All I want is actual shipping and a small cutting boxing fee.

BAGGERSOCAL · 08-10-2007, 09:05 PM

i could use a section off the roof.
i have a small sun roof on my 68

nplocoman · 08-10-2007, 09:11 PM

How big of piece do you want? I will cut tomorrow. It's already at the scrap yard so I better get it fast! I just want to do someone a favor like yourself! And If I cut it for you PLEASE use it!

BAGGERSOCAL · 08-10-2007, 09:14 PM

Quote:

Originally Posted by nplocoman

How big of piece do you want? I will cut tomorrow. It's already at the scrap yard so I better get it fast! I just want to do someone a favor like yourself!

W 17 " X 29" L
inner and the outer center of roof.

Thanks

nplocoman · 08-10-2007, 09:21 PM

Ok this is from the center of the roof? That is not forward or to the rear? And make sure you have plenty to trim. I will cut it tomorrow. You got it!

BAGGERSOCAL · 08-10-2007, 09:29 PM

Quote:

Originally Posted by nplocoman

Ok this is from the center of the roof? That is not forward or to the rear? And make sure you have plenty to trim. I will cut it tomorrow. You got it!

it looks to be centered maybe ad a few inches on each side could trim it.
thanks

nplocoman · 08-10-2007, 09:36 PM

Ok I will get it ready for you I don't think shipping would be much. Send me a PM with your address.

nplocoman · 08-11-2007, 02:07 PM

Got these cut. Send me your address. I can figure shipping.

BAGGERSOCAL · 08-11-2007, 03:48 PM

Quote:

Originally Posted by nplocoman

Got these cut. Send me your address. I can figure shipping.

Pmd ya

TYZ 67 · 08-11-2007, 04:24 PM

i could use the passenger side of the roof inner and outer. I need about a foot in from the rain guttler. If still available let me know. Thanks Tyler

nplocoman · 08-11-2007, 08:49 PM

I thing there is that much left. I can go measure and get back to ya.

nplocoman · 08-11-2007, 08:50 PM

Quote:

Originally Posted by BAGGERSOCAL

Pmd ya

Boxed and shipping Monday. Glad I could help!

nplocoman · 08-11-2007, 09:39 PM

Quote:

Originally Posted by TYZ 67

i could use the passenger side of the roof inner and outer. I need about a foot in from the rain guttler. If still available let me know. Thanks Tyler

Where do you want cut? Humm that did not sound nice!

TYZ 67 · 08-12-2007, 02:00 PM

I pretty much need what is in the picture minus anything behind the rear seam of the cab. I need inside and out of the roof and a couple inches of the A pillar. If you can include the middle portion of the front where the picture cuts off that would be great.

Name: Truck 069.jpg
Views: 90
Size: 29.8 KB

Name: Truck 069.jpg
Views: 90
Size: 29.8 KB

Name: Truck 070.jpg
Views: 86
Size: 35.9 KB

This is what I am working with which might explain why I need such a big portion. Are you getting rid of any other parts of the cab (such as the rear window frame) by any chance? Thanks again. Let me know how much for shipping.

nplocoman · 08-12-2007, 05:43 PM

Hi Tyler,
I cut your piece of the pie today. The rear window frame is shot. The third or fourth pic in my first post shows rust in the frame. I pulled the back window and there is nothing worth using. Sorry.I will find a box tomorrow for the roof section and get it sent. Pm me your mailing address.

TYZ 67 · 08-13-2007, 03:48 AM

I'll send that pm. How much for the shipping?

08-10-2007, 09:03 PM	#1
nplocoman never finish start another Join Date: Mar 2007 Location: North Platte Nebraska Posts: 432	free cab roof Any one want this or parts of it? All I want is actual shipping and a small cutting boxing fee. Last edited by nplocoman; 12-10-2010 at 09:08 PM.

08-10-2007, 09:05 PM	#2
BAGGERSOCAL Active Member Join Date: May 2007 Location: SO CAL Posts: 226	Re: free cab roof i could use a section off the roof. i have a small sun roof on my 68

08-10-2007, 09:11 PM	#3
nplocoman never finish start another Join Date: Mar 2007 Location: North Platte Nebraska Posts: 432	Re: free cab roof How big of piece do you want? I will cut tomorrow. It's already at the scrap yard so I better get it fast! I just want to do someone a favor like yourself! And If I cut it for you PLEASE use it! Last edited by nplocoman; 08-10-2007 at 09:14 PM.

08-10-2007, 09:21 PM	#5
nplocoman never finish start another Join Date: Mar 2007 Location: North Platte Nebraska Posts: 432	Re: free cab roof Ok this is from the center of the roof? That is not forward or to the rear? And make sure you have plenty to trim. I will cut it tomorrow. You got it!

08-10-2007, 09:36 PM	#7
nplocoman never finish start another Join Date: Mar 2007 Location: North Platte Nebraska Posts: 432	Re: free cab roof Ok I will get it ready for you I don't think shipping would be much. Send me a PM with your address.

08-11-2007, 02:07 PM	#8
nplocoman never finish start another Join Date: Mar 2007 Location: North Platte Nebraska Posts: 432	Re: free cab roof Got these cut. Send me your address. I can figure shipping.

08-11-2007, 04:24 PM	#10
TYZ 67 Registered User Join Date: Jul 2007 Location: Bakersfield Ca Posts: 49	Re: free cab roof i could use the passenger side of the roof inner and outer. I need about a foot in from the rain guttler. If still available let me know. Thanks Tyler

08-11-2007, 08:49 PM	#11
nplocoman never finish start another Join Date: Mar 2007 Location: North Platte Nebraska Posts: 432	Re: free cab roof I thing there is that much left. I can go measure and get back to ya.

08-12-2007, 02:00 PM	#14
TYZ 67 Registered User Join Date: Jul 2007 Location: Bakersfield Ca Posts: 49	Re: free cab roof I pretty much need what is in the picture minus anything behind the rear seam of the cab. I need inside and out of the roof and a couple inches of the A pillar. If you can include the middle portion of the front where the picture cuts off that would be great. This is what I am working with which might explain why I need such a big portion. Are you getting rid of any other parts of the cab (such as the rear window frame) by any chance? Thanks again. Let me know how much for shipping.

08-12-2007, 05:43 PM	#15
nplocoman never finish start another Join Date: Mar 2007 Location: North Platte Nebraska Posts: 432	Re: free cab roof Hi Tyler, I cut your piece of the pie today. The rear window frame is shot. The third or fourth pic in my first post shows rust in the frame. I pulled the back window and there is nothing worth using. Sorry.I will find a box tomorrow for the roof section and get it sent. Pm me your mailing address. Last edited by nplocoman; 08-12-2007 at 05:46 PM.

08-13-2007, 03:48 AM	#16
TYZ 67 Registered User Join Date: Jul 2007 Location: Bakersfield Ca Posts: 49	Re: free cab roof I'll send that pm. How much for the shipping?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.