WTB-Driver side ramhorn manifold - The 1947 - Present Chevrolet & GMC Truck Message Board Network

OLDIRON69 · 08-08-2007, 01:15 PM

Just as the title reads. Need for a 2wd '69. DS ramhorn, prefer studs in good shape. Have paypal. Thanks!

RicksTrucks · 08-08-2007, 01:56 PM

I got a few of each. Here is a pic from my computer. Will get you a pic of one of them shortly.

RicksTrucks · 08-08-2007, 04:03 PM

I grabbed the top one in a pile. Is this what you are looking for? More to choose from. $25 plus shipping. Also, I will be going through Dallas Friday the 17th and Sunday the 19th.

OLDIRON69 · 08-08-2007, 04:04 PM

LOL! I just need one driverside shipped to 75754. If you have any need for them I'll trade you a set of good 4x4 ramhorns '68? I was told, for a good set of your 2wd's. I'll buy outright either way...

I needed a PS, got a DS by mistake...sent it back..got a PS from worn brakes..now the guy that put my motor in broke my DS.....what's next??

OLDIRON69 · 08-08-2007, 04:07 PM

Yeah, that is what I need, if you have one with good studs I rather have that. Consider one sold. I have a UPS account or you can ship what ever way is easier for you. US post office is prob. cheaper.

RicksTrucks · 08-08-2007, 04:19 PM

Sorry, already have 3 or 4 sets of the 4x4 ones. May not be able to get shipping quote until tomorrow afternoon or Friday, unless you want me to just go ahead and box it and ship it as soon as I can, then tell you the total. I won't be able to do anything tomorrow afternoon.

OLDIRON69 · 08-08-2007, 10:29 PM

Just send me a DS with decent studs US mail. It will run about $15.00 or so to ship, if more that is fine too. No major rush...just a nice exhaust leak..Thanks a bunch. PM me a total when shipped and I will paypal the cash or what ever method you prefer.

1970bowtie · 08-08-2007, 10:44 PM

i got one but it maybe a passenger, ill run and check real quick

1970bowtie · 08-08-2007, 10:47 PM

yep.. passenger, but its in good shape

OLDIRON69 · 08-09-2007, 07:57 AM

Thanks for lookin Justin, ask your Dad about that trailer for me. I'd appreciate it!!

RicksTrucks · 08-09-2007, 08:03 PM

Found a better one with studs and nuts - was removed by torching the pipe a couple inches from the studs. It is boxed and ready to go. PM your mailing address and I will get it priced at the post office in the morning. Will ship before I leave town if Paypal sent before I leave town at 4pm Friday.

1970bowtie · 08-09-2007, 10:00 PM

i asked him, he said he planned on keeping it to make a four wheeler trailer, ill keep my eyes open for a small trailer that would work for you

RicksTrucks · 08-10-2007, 12:50 PM

Looks like Priority will be 13.20 and Parcel about 11.80

OLDIRON69 · 08-10-2007, 02:14 PM

paypal sent

RicksTrucks · 08-10-2007, 03:54 PM

Dropped off at the post office.

OLDIRON69 · 08-13-2007, 09:31 AM

Thanks Rick!!!! I'll let you know when it arrives.

08-08-2007, 01:15 PM	#1
OLDIRON69 Registered User Join Date: Mar 2007 Location: Ben Wheeler,Texas Posts: 992	WTB-Driver side ramhorn manifold Just as the title reads. Need for a 2wd '69. DS ramhorn, prefer studs in good shape. Have paypal. Thanks! __________________ 05 2500HD 6.0 excab 69 LWB-Gone but not forgotten! 68 Dodge Charger 383/727 69 Dodge Charger-440/4spd

08-08-2007, 01:56 PM	#2
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,639	Re: WTB-Driver side ramhorn manifold I got a few of each. Here is a pic from my computer. Will get you a pic of one of them shortly. Attached Images __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

08-08-2007, 04:03 PM	#3
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,639	Re: WTB-Driver side ramhorn manifold I grabbed the top one in a pile. Is this what you are looking for? More to choose from. $25 plus shipping. Also, I will be going through Dallas Friday the 17th and Sunday the 19th. Attached Images __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4 Last edited by RicksTrucks; 08-08-2007 at 04:04 PM.

08-08-2007, 04:04 PM	#4
OLDIRON69 Registered User Join Date: Mar 2007 Location: Ben Wheeler,Texas Posts: 992	Re: WTB-Driver side ramhorn manifold LOL! I just need one driverside shipped to 75754. If you have any need for them I'll trade you a set of good 4x4 ramhorns '68? I was told, for a good set of your 2wd's. I'll buy outright either way... I needed a PS, got a DS by mistake...sent it back..got a PS from worn brakes..now the guy that put my motor in broke my DS.....what's next?? __________________ 05 2500HD 6.0 excab 69 LWB-Gone but not forgotten! 68 Dodge Charger 383/727 69 Dodge Charger-440/4spd

08-08-2007, 04:07 PM	#5
OLDIRON69 Registered User Join Date: Mar 2007 Location: Ben Wheeler,Texas Posts: 992	Re: WTB-Driver side ramhorn manifold Yeah, that is what I need, if you have one with good studs I rather have that. Consider one sold. I have a UPS account or you can ship what ever way is easier for you. US post office is prob. cheaper. __________________ 05 2500HD 6.0 excab 69 LWB-Gone but not forgotten! 68 Dodge Charger 383/727 69 Dodge Charger-440/4spd

08-08-2007, 04:19 PM	#6
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,639	Re: WTB-Driver side ramhorn manifold Sorry, already have 3 or 4 sets of the 4x4 ones. May not be able to get shipping quote until tomorrow afternoon or Friday, unless you want me to just go ahead and box it and ship it as soon as I can, then tell you the total. I won't be able to do anything tomorrow afternoon. __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

08-08-2007, 10:29 PM	#7
OLDIRON69 Registered User Join Date: Mar 2007 Location: Ben Wheeler,Texas Posts: 992	Re: WTB-Driver side ramhorn manifold Just send me a DS with decent studs US mail. It will run about $15.00 or so to ship, if more that is fine too. No major rush...just a nice exhaust leak..Thanks a bunch. PM me a total when shipped and I will paypal the cash or what ever method you prefer. __________________ 05 2500HD 6.0 excab 69 LWB-Gone but not forgotten! 68 Dodge Charger 383/727 69 Dodge Charger-440/4spd

08-08-2007, 10:44 PM	#8
1970bowtie Senior Member Join Date: Apr 2007 Location: East Texas Posts: 549	Re: WTB-Driver side ramhorn manifold i got one but it maybe a passenger, ill run and check real quick __________________ Justin 1970 c/10 short wide bed My build thread WTT 1970 chevy front end for 67/68 chevy front end WTT 2 15x10 american racing outlaw 2 wheels for 2 of the same in a 15x7 or 15x8

08-08-2007, 10:47 PM	#9
1970bowtie Senior Member Join Date: Apr 2007 Location: East Texas Posts: 549	Re: WTB-Driver side ramhorn manifold yep.. passenger, but its in good shape __________________ Justin 1970 c/10 short wide bed My build thread WTT 1970 chevy front end for 67/68 chevy front end WTT 2 15x10 american racing outlaw 2 wheels for 2 of the same in a 15x7 or 15x8

08-09-2007, 07:57 AM	#10
OLDIRON69 Registered User Join Date: Mar 2007 Location: Ben Wheeler,Texas Posts: 992	Re: WTB-Driver side ramhorn manifold Thanks for lookin Justin, ask your Dad about that trailer for me. I'd appreciate it!! __________________ 05 2500HD 6.0 excab 69 LWB-Gone but not forgotten! 68 Dodge Charger 383/727 69 Dodge Charger-440/4spd

08-09-2007, 08:03 PM	#11
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,639	Re: WTB-Driver side ramhorn manifold Found a better one with studs and nuts - was removed by torching the pipe a couple inches from the studs. It is boxed and ready to go. PM your mailing address and I will get it priced at the post office in the morning. Will ship before I leave town if Paypal sent before I leave town at 4pm Friday. __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

08-09-2007, 10:00 PM	#12
1970bowtie Senior Member Join Date: Apr 2007 Location: East Texas Posts: 549	Re: WTB-Driver side ramhorn manifold i asked him, he said he planned on keeping it to make a four wheeler trailer, ill keep my eyes open for a small trailer that would work for you __________________ Justin 1970 c/10 short wide bed My build thread WTT 1970 chevy front end for 67/68 chevy front end WTT 2 15x10 american racing outlaw 2 wheels for 2 of the same in a 15x7 or 15x8

08-10-2007, 12:50 PM	#13
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,639	Re: WTB-Driver side ramhorn manifold Looks like Priority will be 13.20 and Parcel about 11.80 __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

08-10-2007, 02:14 PM	#14
OLDIRON69 Registered User Join Date: Mar 2007 Location: Ben Wheeler,Texas Posts: 992	Re: WTB-Driver side ramhorn manifold paypal sent __________________ 05 2500HD 6.0 excab 69 LWB-Gone but not forgotten! 68 Dodge Charger 383/727 69 Dodge Charger-440/4spd

08-10-2007, 03:54 PM	#15
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,639	Re: WTB-Driver side ramhorn manifold Dropped off at the post office. __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4



Register or Log In To remove these advertisements.

08-13-2007, 09:31 AM	#16
OLDIRON69 Registered User Join Date: Mar 2007 Location: Ben Wheeler,Texas Posts: 992	Re: WTB-Driver side ramhorn manifold Thanks Rick!!!! I'll let you know when it arrives. __________________ 05 2500HD 6.0 excab 69 LWB-Gone but not forgotten! 68 Dodge Charger 383/727 69 Dodge Charger-440/4spd

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.