|
12-19-2002, 02:49 AM
|
#1 |
|
Registered User
Join Date: Dec 2002
Location: Colorado
Posts: 57
|
Auto Meter Guage ???
I was needing some information about the size of the dash gages. I know I want to use the White faced Auto Meter guages, but I am needing the sizes on the bezel.
Does anyone have any ideas on what to do or where to put what were? Needing ideas and any pictures that anyone is willing to share. Thanks again, -Michael |
|
|
|
12-19-2002, 03:49 AM
|
#2 |
|
Registered User
Join Date: Feb 2001
Location: Hurst,TX,US
Posts: 301
|
my top ones are 5 inch i believe, the biggest ones they got. My little ones are 2 and 5/8. I just cut the holes in the bottom with a hole saw. If you got any questons let me know.
http://photos.yahoo.com/bc/white68ch...c=ph%26.view=t http://photos.yahoo.com/bc/white68ch....gif%26.src=ph
__________________
1968 swb IM-Bufechevy56 If its to loud then your to old |
|
|
|
|
12-19-2002, 09:10 AM
|
#3 |
|
PROJECT 7DEUCE
 
Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,606
|
Truckin did an article a few years back on the whole cutting /wiring and i will try to look for the issue tonight...
__________________
GO BIG GREEN  GO DUCKSMEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
|
|
|
|
12-19-2002, 09:12 AM
|
#4 |
|
Registered User
Join Date: Jun 2002
Location: Lafayette, LA
Posts: 500
|
__________________
69 SWB LT1/4L60E www.classicplace.com |
|
|
|
|
12-19-2002, 12:36 PM
|
#5 |
|
Registered User
Join Date: Aug 2001
Location: West Fork, Arkansas - Razorback Country
Posts: 1,826
|
I have the same 5" ones on top but used the 2 1/8" ones for the bottom. No drilling required and the actually sit flush with the bezel. Good luck!
__________________
Smooth68's Web Site WTB 64-66 project or frame/cab, SWB or LWB...I have the fever! Whatcha got?? '68 Short Step - Shaved Body, Soon Bagged - SOLD Driver-2004 GMC Z-71 Ext-cab |
|
|
|
|
12-19-2002, 07:27 PM
|
#6 |
|
Registered User
Join Date: Jun 2002
Location: Lafayette, LA
Posts: 500
|
I saw this pic on one of the posts, and this is what I plan on using. It's a glove box door with holes cut in it.
__________________
69 SWB LT1/4L60E www.classicplace.com |
|
|
|
|
12-20-2002, 09:18 AM
|
#7 |
|
Registered User
Join Date: Oct 2002
Location: Marietta, Georgia
Posts: 25
|
A glove box door.....what a cool idea!
|
|
|
|
|
12-20-2002, 06:49 PM
|
#8 |
|
Registered User
Join Date: Jun 2002
Location: Lafayette, LA
Posts: 500
|
Yep...seemed like a good idea to me, also.
__________________
69 SWB LT1/4L60E www.classicplace.com |
|
|
|
|
12-20-2002, 10:04 PM
|
#9 |
|
in WAY over my head
Join Date: Sep 2001
Location: Douglasville GA
Posts: 923
|
cool idea! I doubt I could get mine cut that clean tho w/o forking over some money.
|
|
|
|
|
12-20-2002, 10:17 PM
|
#10 |
|
Registered User
Join Date: Jun 2002
Location: Lafayette, LA
Posts: 500
|
I'm going to try and cut out the back of the panel and use a nibbler to cut the holes.
__________________
69 SWB LT1/4L60E www.classicplace.com |
|
|
|
|
12-21-2002, 02:17 AM
|
#11 |
|
So Many Ideas, So Little Money
Join Date: Sep 2001
Location: Marshalltown, IA
Posts: 1,610
|
I' suggest whole saw and saber saw and just clean up edges with an air grinder(little,like dremel)
__________________
72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu Marshalltown, Iowa |
|
|
|
|
12-21-2002, 01:58 PM
|
#12 |
|
Registered User
Join Date: Sep 2000
Location: Prescott AZ USA
Posts: 147
|
How about something like this?
__________________
1972 GMC Sierra Grande 4x4 long bed |
|
|
|
|
12-21-2002, 03:46 PM
|
#13 |
|
in WAY over my head
Join Date: Sep 2001
Location: Douglasville GA
Posts: 923
|
thats where my moneys goin.. one of your kits
 the custom look is cool... but the factory just works better IMO |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
