? on glovebox options in my burb - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*project 67 sub* · 08-04-2007, 07:38 PM

these are on my 67 C10 burbs I think original glove box.
1. 04B98GA- SIDE TRIM MOLD EQ
2. 04G50FA- HD REAR SPRINGS
3. 04K24GB- CLOSED ENG POS VENT
4. 04M49HN- TURBO-HYDRAMA-MATIC
5. 04PO3AA- CROMED HUBCAPS
6. 04V37GJ- CHROME-BUMPER FRT&R
7. 04Z61CA- CUSTOM APPEAR INCL
8. 04001KG- SPECIAIL PAINT
9. 04A11BK- TINTED GLASS
10. 04C42CB- DELUX AIR HEATER
11. 04K19NG- GM AIR INJ HEATER
12. 04K76CC- 61 AMP DELCO GEN
13. 04N40HA- POWER STEERING
14. 4U63HH- PUSH BUTTON RADIO
15. 04Z53BR- AMMETER-OIL GAUGE
16. 04Z62BJ- CUSTOM C&C EQUIP

What does option #3,7,8,11,16 consist of and what are they?
On #4, what transmission did it come with?

oh and half the model # is missing, all I can get from it is
CEIO9 AND BASE 127. Also their is no engine code for the one that it came with.

**too much stuff** · 08-04-2007, 10:32 PM

I will take a stab at it for you:#3 i think would be a down draft setup on the engine. (no pcv valve) There should be a metal tube coming from the block by the dist.
#7 i would think would be outside chrome such as vent windows, or a chrome strip across the lower or upper portion. Possibly around the windshield also.
#8 i think would be a special order paint color or colors.
#11 no clue...
#16 is custom comfort and convienence package. I think that was interior upgrades such as better seats, vinyl door panels and maybe floor carpet.
#4 i think could be either the turbo 350 or turbo 400. I think they used the same code. I have seen quite a few 67 models with the 400
Keep in mind i am just guessing at these, i am sure others will clarify or correct me. Eric
Got any pics?

sweet70beast · 08-08-2007, 09:03 AM

Turbo 350s didn't show up until 69 and they didn't call powerglides turbo hydromatics so it would have come with a th400.

Long Roof · 08-08-2007, 05:16 PM

Some of that stuff sounds like Cali emissions stuff.

Aaron

Mike C · 08-12-2007, 02:57 PM

PCV means Positive Closed Ventilation, in '67 road draft was standard and you should have the optional PCV which should tie into the oil fill tube on the front of the intake manifold.

fun in dirt · 08-13-2007, 06:24 PM

Quote:

Originally Posted by Mike C

PCV means Positive Closed Ventilation, in '67 road draft was standard and you should have the optional PCV which should tie into the oil fill tube on the front of the intake manifold.

What

Mike C · 08-14-2007, 09:14 PM

Oops. Sorry. Positive Crankcase Ventilation, which is the same as closed engine positive crankcase ventilation. Can't type and think at the same time...

On the 69 and newer small blocks, the oil fill and crankcase vent go in the valve cover. In the pre-69 versions, there is an oil fill tube that sticks up 6" out of the front of the intake. When equipped with PCV, it threaded into this fill tube.

08-04-2007, 10:32 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,786	Re: ? on glovebox options in my burb I will take a stab at it for you:#3 i think would be a down draft setup on the engine. (no pcv valve) There should be a metal tube coming from the block by the dist. #7 i would think would be outside chrome such as vent windows, or a chrome strip across the lower or upper portion. Possibly around the windshield also. #8 i think would be a special order paint color or colors. #11 no clue... #16 is custom comfort and convienence package. I think that was interior upgrades such as better seats, vinyl door panels and maybe floor carpet. #4 i think could be either the turbo 350 or turbo 400. I think they used the same code. I have seen quite a few 67 models with the 400 Keep in mind i am just guessing at these, i am sure others will clarify or correct me. Eric Got any pics? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

08-12-2007, 02:57 PM	#5
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,727	Re: ? on glovebox options in my burb PCV means Positive Closed Ventilation, in '67 road draft was standard and you should have the optional PCV which should tie into the oil fill tube on the front of the intake manifold. __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-04-2007, 07:38 PM	#1
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	? on glovebox options in my burb these are on my 67 C10 burbs I think original glove box. 1. 04B98GA- SIDE TRIM MOLD EQ 2. 04G50FA- HD REAR SPRINGS 3. 04K24GB- CLOSED ENG POS VENT 4. 04M49HN- TURBO-HYDRAMA-MATIC 5. 04PO3AA- CROMED HUBCAPS 6. 04V37GJ- CHROME-BUMPER FRT&R 7. 04Z61CA- CUSTOM APPEAR INCL 8. 04001KG- SPECIAIL PAINT 9. 04A11BK- TINTED GLASS 10. 04C42CB- DELUX AIR HEATER 11. 04K19NG- GM AIR INJ HEATER 12. 04K76CC- 61 AMP DELCO GEN 13. 04N40HA- POWER STEERING 14. 4U63HH- PUSH BUTTON RADIO 15. 04Z53BR- AMMETER-OIL GAUGE 16. 04Z62BJ- CUSTOM C&C EQUIP What does option #3,7,8,11,16 consist of and what are they? On #4, what transmission did it come with? oh and half the model # is missing, all I can get from it is CEIO9 AND BASE 127. Also their is no engine code for the one that it came with.

08-08-2007, 09:03 AM	#3
sweet70beast Registered User Join Date: Sep 2006 Location: Shelley Idaho Posts: 876	Re: ? on glovebox options in my burb Turbo 350s didn't show up until 69 and they didn't call powerglides turbo hydromatics so it would have come with a th400.

08-08-2007, 05:16 PM	#4
Long Roof Old School, New Style Join Date: Jun 2005 Location: Monroeville, Ohio Posts: 790	Re: ? on glovebox options in my burb Some of that stuff sounds like Cali emissions stuff. Aaron __________________ The Good: - 72 GMC Jimmy 4x4 - 307 cid / 350 th - 70 Chevy Suburban 1/2T 2wd - 454 cid /400 th - 96 Chevy Impala SS - mainly stock - 98 Chevy Tahoe LT 4x4 - all stock The Bad: - 86 Chevy Suburban 1/2T 4x4 - winter beater The Ugly: - 72 Chevy Suburban 1/2T 2wd - parts truck Last edited by Long Roof; 08-08-2007 at 05:16 PM.

08-14-2007, 09:14 PM	#7
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,727	Re: ? on glovebox options in my burb Oops. Sorry. Positive Crankcase Ventilation, which is the same as closed engine positive crankcase ventilation. Can't type and think at the same time... On the 69 and newer small blocks, the oil fill and crankcase vent go in the valve cover. In the pre-69 versions, there is an oil fill tube that sticks up 6" out of the front of the intake. When equipped with PCV, it threaded into this fill tube. __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.