manual dual reservoir brakes for my 64 and 66 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72_ventura · 08-18-2007, 10:09 AM

i was wondering if there was a fairly easy way to change out my single pot master cylinder to a dual....im not really concerned about having power brakes just want to have the lines seperated......what year should i look for as a parts donor.....is there one that the pedal and master cylinder from the donor will bolt up in place?

63 & 64 Bowties · 08-18-2007, 01:22 PM

I had saved this from an earlier thread. This is supposed to be a "bolt up"
http://www.partsamerica.com/ProductD...tNumber=101639

Demmit_Hemmit's 65 · 08-18-2007, 01:22 PM

I used one out of a 1971 GMC....................It is a non power unit that bolted right in.......Hemmit

**ChiefRocka** · 08-18-2007, 03:19 PM

Check out my build here...I used a 67 Impala master (drum/drum) from Kragens for under $25....

http://www.67-72chevytrucks.com/vboa...=226210&page=5

post #123

72_ventura · 08-19-2007, 08:41 PM

thanks guys ill have to give one of those a shot

08-18-2007, 01:22 PM	#2
63 & 64 Bowties and a few others Join Date: Jun 2007 Location: Blue Ridge Mountains of VA Posts: 5,638	Re: manual dual reservoir brakes for my 64 and 66 I had saved this from an earlier thread. This is supposed to be a "bolt up" http://www.partsamerica.com/ProductD...tNumber=101639 __________________ Bill US Army Vet -193rd Infantry BlueRidgeMuscleCars.com “The greatness of a nation and its moral progress can be judged by the way its animals are treated” Gandhi

08-18-2007, 01:22 PM	#3
Demmit_Hemmit's 65 Senior Member Join Date: Mar 2002 Location: Peru, Indiana Posts: 741	Re: manual dual reservoir brakes for my 64 and 66 I used one out of a 1971 GMC....................It is a non power unit that bolted right in.......Hemmit

08-18-2007, 03:19 PM	#4
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: manual dual reservoir brakes for my 64 and 66 Check out my build here...I used a 67 Impala master (drum/drum) from Kragens for under $25.... http://www.67-72chevytrucks.com/vboa...=226210&page=5 post #123 __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

08-19-2007, 08:41 PM	#5
72_ventura Registered User Join Date: Jul 2007 Location: odessa, tx Posts: 16	Re: manual dual reservoir brakes for my 64 and 66 thanks guys ill have to give one of those a shot

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-18-2007, 10:09 AM	#1
72_ventura Registered User Join Date: Jul 2007 Location: odessa, tx Posts: 16	manual dual reservoir brakes for my 64 and 66 i was wondering if there was a fairly easy way to change out my single pot master cylinder to a dual....im not really concerned about having power brakes just want to have the lines seperated......what year should i look for as a parts donor.....is there one that the pedal and master cylinder from the donor will bolt up in place? Last edited by 72_ventura; 08-18-2007 at 10:10 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.