![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Active Member
![]() Join Date: Jul 2007
Location: Centrally located between Houston, Austin and Waco. BCS area.
Posts: 7,947
|
Update on bowed hood problem... (pics)
Since my last post on this, I decided to do the bracing to see if I could reinforce the center of the hood (the weak spot). Using "prg machine's" suggestion of a 1X1 inch square tubing, I came up with this for my spare hood.
I notched the top part (rear) and cut a "V" on the front part. Squeezed the "V" with the vise so that it would fit under the bracing and then tapped in place. If anyone is interested, I can detail what I did a little more. (Excuse the partial painting) ![]() ![]() |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|