NEW DASH!!! Check it out. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Blackhawkdc · 12-27-2002, 11:00 PM

To all of you who may have been waiting. I finally got the new dash for my '69. Ball-milled aluminum. Its very well done and the guy loves what he does. He even has an exact duplicate of mine sitting at the shop. Just so happened that he messed up and cut the speedo and tach holes too big, 3 3/4" diameter. If anyone is interested in it, drop him a note. His website is http://www.rodstuff.com The gauges are VDO Millenium gauges. The dash is set up to take just about any gauge set out there.

Blackhawkdc · 12-27-2002, 11:03 PM

here's a close-up of the bowtie in the center. Note the turn and high-beam indicators. They are actually LEDs mounted in the dashplate.

chevy_fatman · 12-27-2002, 11:05 PM

Oooooohhh, me want!!

how much did it cost you? nice!

Blackhawkdc · 12-27-2002, 11:08 PM

Mine was an experimental/trial job. He's gonna start selling them through a catalog for about $200. Drop him a note if you're interested. It might take him a while to get anything done though. he's in the process of moving.

**fine69** · 12-27-2002, 11:20 PM

That is kickass. Can you show us a pic of the backside? And what guages did you use?

BUXMAN66 · 12-27-2002, 11:37 PM

veddy nice!

70c10 · 12-27-2002, 11:42 PM

That is a great price. Your bezel looks sweet!

Blackhawkdc · 12-28-2002, 12:32 AM

I'll try and grab a pic of the backside with my dad's digicam tomorrow. The gauges are VDO Millenium gauges. for the time being though, I gotta find a cheap fuel level gauge. One to work with the GM sender until I get the money to replace the gas tank with a relocated fuel cell.

weasel29gm · 12-28-2002, 04:56 AM

Nice work!!!!!!!! One of the best I've seen.

nitor · 12-28-2002, 09:41 AM

Very pretty!!

Blackhawkdc · 12-28-2002, 03:45 PM

Here's some more pics of the backside. I bought the gauges as a set, so it came with a really nice wiring harness.

Blackhawkdc · 12-28-2002, 03:48 PM

another, side view

Blackhawkdc · 12-28-2002, 03:49 PM

here's a close-up of the baskside of the LEDs, you can also see the studs that he installed for mounting.

XXL · 12-28-2002, 07:07 PM

Any idea if the guy is planning on doing some one-off stuff? I've got a bezel idea I'd like to see milled out.

Kenneth

XXL · 01-02-2003, 07:37 PM

Quote:

Originally posted by Blackhawkdc
If anyone is interested in it, drop him a note.

Just sent him a note.

Thanks for the info!

Kenneth

Dean23 · 01-02-2003, 07:42 PM

Wow thatsexactly what I'm lookin for for my 68. But i want a 5" tach and speedo instead.

MandarinSixSeven · 01-02-2003, 08:41 PM

Beeeeeutiful!!! omg i want one of those

Blackhawkdc · 01-03-2003, 12:39 AM

Quote:

Originally posted by Dean23
Wow thatsexactly what I'm lookin for for my 68. But i want a 5" tach and speedo instead.

I'm sure your 5" tach and speedo will be no problem for him. All he's gotta do is set the holes to 5" instead of 3 3/8" Its all pretty much computer run equipment.

**Yukon Jack** · 01-03-2003, 12:01 PM

The $200 price didn't include the gauges did it?

Blackhawkdc · 01-05-2003, 12:56 AM

Quote:

Originally posted by Yukon Jack
The $200 price didn't include the gauges did it?

LOL don't I wish. The gauge set was another $425 through Summit Racing.

**Yukon Jack** · 01-06-2003, 12:59 PM

I was gonna keel over if that price did include them, I just knew that couldn't be right. Sure is a great looking setup!

12-27-2002, 11:00 PM	#1
Blackhawkdc 440 american Horses Join Date: Mar 2001 Location: Anoka, MN USA Posts: 470	NEW DASH!!! Check it out. To all of you who may have been waiting. I finally got the new dash for my '69. Ball-milled aluminum. Its very well done and the guy loves what he does. He even has an exact duplicate of mine sitting at the shop. Just so happened that he messed up and cut the speedo and tach holes too big, 3 3/4" diameter. If anyone is interested in it, drop him a note. His website is http://www.rodstuff.com The gauges are VDO Millenium gauges. The dash is set up to take just about any gauge set out there. Attached Images __________________ Seth Petro 1969 Chev Short Step 425hp 350, TH400, big tires, fast truck 1979 Pontiac Trans Am 1991 Saturn SL1 - gas mileage! (and free) 1977 Buick LeSabre - for sale May America bless God, and may God bless America Last edited by Blackhawkdc; 12-27-2002 at 11:09 PM.

12-27-2002, 11:03 PM	#2
Blackhawkdc 440 american Horses Join Date: Mar 2001 Location: Anoka, MN USA Posts: 470	here's a close-up of the bowtie in the center. Note the turn and high-beam indicators. They are actually LEDs mounted in the dashplate. Attached Images __________________ Seth Petro 1969 Chev Short Step 425hp 350, TH400, big tires, fast truck 1979 Pontiac Trans Am 1991 Saturn SL1 - gas mileage! (and free) 1977 Buick LeSabre - for sale May America bless God, and may God bless America

12-27-2002, 11:05 PM	#3
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,620	Oooooohhh, me want!! how much did it cost you? nice! __________________ Paul How do you make the invisible, visible?.........You take it away.

12-27-2002, 11:08 PM	#4
Blackhawkdc 440 american Horses Join Date: Mar 2001 Location: Anoka, MN USA Posts: 470	Mine was an experimental/trial job. He's gonna start selling them through a catalog for about $200. Drop him a note if you're interested. It might take him a while to get anything done though. he's in the process of moving. __________________ Seth Petro 1969 Chev Short Step 425hp 350, TH400, big tires, fast truck 1979 Pontiac Trans Am 1991 Saturn SL1 - gas mileage! (and free) 1977 Buick LeSabre - for sale May America bless God, and may God bless America

12-27-2002, 11:20 PM	#5
fine69 Senior Member Join Date: Dec 1999 Location: Urbana,Ohio,USA Posts: 4,618	That is kickass. Can you show us a pic of the backside? And what guages did you use? __________________ 2008 Chevy HHR 1/2 panel. 1949 Chevy Panel truck(just sittin, waiting) Board member #6

12-27-2002, 11:37 PM	#6
BUXMAN66 go bucks! Join Date: Jan 2002 Location: MIAMISBURG OHIO USA Posts: 803	veddy nice! __________________ '68 swb 1/2t 350/350th '86 lngbd 3/4 TON parts getter '49 gmc 1/2 t 5 window 350/350th '96 gmc sonoma sle ext-cab. hey it's a 4cyl. 5 spd and good on gas y'know?

12-27-2002, 11:42 PM	#7
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	That is a great price. Your bezel looks sweet! __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

12-28-2002, 12:32 AM	#8
Blackhawkdc 440 american Horses Join Date: Mar 2001 Location: Anoka, MN USA Posts: 470	I'll try and grab a pic of the backside with my dad's digicam tomorrow. The gauges are VDO Millenium gauges. for the time being though, I gotta find a cheap fuel level gauge. One to work with the GM sender until I get the money to replace the gas tank with a relocated fuel cell. __________________ Seth Petro 1969 Chev Short Step 425hp 350, TH400, big tires, fast truck 1979 Pontiac Trans Am 1991 Saturn SL1 - gas mileage! (and free) 1977 Buick LeSabre - for sale May America bless God, and may God bless America

12-28-2002, 04:56 AM	#9
weasel29gm SLOW BUT SURE,BUT CLOSER Join Date: Feb 2002 Location: eleanor wv usa Posts: 3,103	Nice work!!!!!!!! One of the best I've seen. __________________ 69 C-10, OWNED 38YRS... 350 over 30, 350 Turbo, 3:73 Posi P/S, P/B Black with red and black int. ''LOVE THESE OLD ''TRUCKS.......

12-28-2002, 09:41 AM	#10
nitor Too many projects Join Date: Aug 2002 Location: Morrow, OH Posts: 344	Very pretty!! __________________ Jim '55 Chevrolet Pickup '56 Chevrolet Belair '04 Chevrolet Astro '95 Chevrolet Blazer

12-28-2002, 03:45 PM	#11
Blackhawkdc 440 american Horses Join Date: Mar 2001 Location: Anoka, MN USA Posts: 470	Here's some more pics of the backside. I bought the gauges as a set, so it came with a really nice wiring harness. Attached Images __________________ Seth Petro 1969 Chev Short Step 425hp 350, TH400, big tires, fast truck 1979 Pontiac Trans Am 1991 Saturn SL1 - gas mileage! (and free) 1977 Buick LeSabre - for sale May America bless God, and may God bless America

12-28-2002, 03:48 PM	#12
Blackhawkdc 440 american Horses Join Date: Mar 2001 Location: Anoka, MN USA Posts: 470	another, side view Attached Images __________________ Seth Petro 1969 Chev Short Step 425hp 350, TH400, big tires, fast truck 1979 Pontiac Trans Am 1991 Saturn SL1 - gas mileage! (and free) 1977 Buick LeSabre - for sale May America bless God, and may God bless America

12-28-2002, 03:49 PM	#13
Blackhawkdc 440 american Horses Join Date: Mar 2001 Location: Anoka, MN USA Posts: 470	here's a close-up of the baskside of the LEDs, you can also see the studs that he installed for mounting. Attached Images __________________ Seth Petro 1969 Chev Short Step 425hp 350, TH400, big tires, fast truck 1979 Pontiac Trans Am 1991 Saturn SL1 - gas mileage! (and free) 1977 Buick LeSabre - for sale May America bless God, and may God bless America

12-28-2002, 07:07 PM	#14
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	Any idea if the guy is planning on doing some one-off stuff? I've got a bezel idea I'd like to see milled out. Kenneth __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter

01-02-2003, 07:42 PM	#16
Dean23 68cst_ss490 Join Date: May 2001 Location: edmonton,canada Posts: 1,363	Wow thatsexactly what I'm lookin for for my 68. But i want a 5" tach and speedo instead. __________________ Dean edmonton,canada a winter wonderland 2005 Chevrolet Avalanche LT cold air intake, performance exhaust, Comp cams cam, jba shorty ceramic headers. http://www.cardomain.com/ride/3090973



Register or Log In To remove these advertisements.

01-02-2003, 08:41 PM	#17
MandarinSixSeven Seasonal Poster Join Date: Apr 2002 Location: Kelowna BC Canada Posts: 896	Beeeeeutiful!!! omg i want one of those __________________ 67 GMC Short Step 350/4-Speed/3.08 Posi Front/Rear Sway Bars Kelowna BC, Canada Member of DTPW

01-03-2003, 12:01 PM	#19
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,689	The $200 price didn't include the gauges did it? __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

01-06-2003, 12:59 PM	#21
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,689	I was gonna keel over if that price did include them, I just knew that couldn't be right. Sure is a great looking setup! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.