Project 67 GMC - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**DREW67** · 09-19-2007, 09:28 PM

Here is my project it's been going on about a year now. Bought the truck from New Mexico only rust on this truck was a small spot on the driver side kick panel area. The under side was so clean I never seen a truck with no under coating just clean sheet metal. Over the past winter I cleaned and painted the frame rebuilt the front end with CPP parts and added 6 lug disc brakes 2 1/2 drop spindels, EC sway bar and 4" leaf springs in rear. Finally took it the body shop and had the stake pockets welded in and smoothed and some minor body work. Then I sent it to the paint shop had it painted Habinaro Red still needs to be polished out repro GMC chrome grille. Worked on the bed wood Chevy Duty (Classic Parts of America) red oak then about 10 coats of Varnish sanding the first 2 coats. This past weekend Joesjunk came by and picked up a engine fro a friend of his and helped me put the bed on that was a great help thanks Joe. I bolted it down and was having problem with the bolts near the tailgate area had to take off 1/16 around the counter sink hole and had to add more varnish

. Oh well it all coming together. Need to get up to NE. to pickup my engine and tranny 402 BB 400th I think I'm going to keep it stock completely but will see. I have some Boydcoddington 6 lug Smoothies that will going on all four. Stock interior with buddy buckets and Vintage Air. Hope to be done by Spring. Oh well here are a few pictures this is no Tim Christian but I sure did get a lot of great Ideas from him.

**DREW67** · 09-19-2007, 09:32 PM

A few more pictures

**DREW67** · 09-19-2007, 09:35 PM

More

OlChev67 · 09-19-2007, 10:15 PM

thats a beauty

*ksjh1316* · 09-19-2007, 10:22 PM

With grear work like that your welcome to help on my truck any day

BLAZERMAN · 09-19-2007, 10:22 PM

Thats going to be Sharp!! looks like youve come along way with it. How about the good looking short fleet you have beside it.. Got any pics of it?

kyull67 · 09-19-2007, 11:27 PM

That is one BADass small windowed short stepper!

72armyswbtruck · 09-20-2007, 12:13 AM

That is a super nice looking step

**special-K** · 09-20-2007, 07:08 AM

Fantastic job!!Sweet`67...GMC!!!

**DREW67** · 09-20-2007, 08:24 AM

Thanks for the comments. This is what I started with.

HOTFUN · 09-20-2007, 08:47 AM

Andrew ,Wow that is a nice rust free GMC. Nice detail on the wood floor and hardware with those colors. My 67 GMC Cab looks about the same. I also have some very nice original 67 GMC Custom pieces from mine that I won't be using when you come up. Mark

**Joesjunk** · 09-20-2007, 06:24 PM

Andrew, The truck sure looked good when I was over ther Sunday! Guys, This thing was so clean on the under side!! What a perfect truck to start with! Looking good!!!!!!!!!!

**DREW67** · 09-20-2007, 07:10 PM

Joe when you where over on Sunday my wife said she knew which truck was yours.

PanelDeland · 09-20-2007, 07:38 PM

"NICE" I think the small window step is the ultimate in style.The small window just gives it an oldstyle cue as does the step bed.Finding one with that little rust sure makes a project easier.

kyull67 · 09-20-2007, 09:00 PM

Quote:

Originally Posted by PanelDeland

"NICE" I think the small window step is the ultimate in style.The small window just gives it an oldstyle cue as does the step bed.Finding one with that little rust sure makes a project easier.

'Nuff said.

turner15 · 09-20-2007, 09:20 PM

I'd like to see a shot of the grill.

**DREW67** · 10-10-2007, 07:21 PM

Here are pictures with the wheels and grill on.

sb69chevy · 10-10-2007, 07:25 PM

Beautiful truck you have there, and cool color

**Joesjunk** · 10-10-2007, 10:37 PM

WOW Andrew, That looks great!!!! I still want to buy the old wheels and tires off that truck. I need to come buy and see it again!

67_C-30 · 10-10-2007, 10:49 PM

Quote:

Originally Posted by PanelDeland

"NICE" I think the small window step is the ultimate in style.The small window just gives it an oldstyle cue as does the step bed.Finding one with that little rust sure makes a project easier.

Yep Yep! I love the rear small window, and no gawky government-mandated side markers!

**DREW67** · 10-11-2007, 08:03 AM

Thanks Guys!

Joe yeah come over with the 72 3/4 so I can show my wife maybe she will give in.

andrewt2 · 05-24-2008, 06:46 AM

This truck is beautiful any recent photos of it? wish you could make it to the midwest members board meet we got scheduled for the 31st of this month in NE! this looks like an amazing truck... TTT

whatnow123 · 05-24-2008, 08:26 AM

Man that is nice!!

Question, can you tell me where you got the tail lights and some info on them?

otsenre · 05-24-2008, 08:50 AM

Very nice Drew! I would be scared to drop that 402 in there without removing the front clip.

Gray Ghost · 05-24-2008, 01:30 PM

Wow, that's a looker now! You have done a fine job on your truck. What's the color?

09-19-2007, 09:28 PM	#1
DREW67 Senior Member Join Date: Aug 2001 Location: Kansas City, Mo Posts: 1,031	Project 67 GMC Here is my project it's been going on about a year now. Bought the truck from New Mexico only rust on this truck was a small spot on the driver side kick panel area. The under side was so clean I never seen a truck with no under coating just clean sheet metal. Over the past winter I cleaned and painted the frame rebuilt the front end with CPP parts and added 6 lug disc brakes 2 1/2 drop spindels, EC sway bar and 4" leaf springs in rear. Finally took it the body shop and had the stake pockets welded in and smoothed and some minor body work. Then I sent it to the paint shop had it painted Habinaro Red still needs to be polished out repro GMC chrome grille. Worked on the bed wood Chevy Duty (Classic Parts of America) red oak then about 10 coats of Varnish sanding the first 2 coats. This past weekend Joesjunk came by and picked up a engine fro a friend of his and helped me put the bed on that was a great help thanks Joe. I bolted it down and was having problem with the bolts near the tailgate area had to take off 1/16 around the counter sink hole and had to add more varnish . Oh well it all coming together. Need to get up to NE. to pickup my engine and tranny 402 BB 400th I think I'm going to keep it stock completely but will see. I have some Boydcoddington 6 lug Smoothies that will going on all four. Stock interior with buddy buckets and Vintage Air. Hope to be done by Spring. Oh well here are a few pictures this is no Tim Christian but I sure did get a lot of great Ideas from him. Attached Images __________________ DREW67

09-19-2007, 09:32 PM	#2
DREW67 Senior Member Join Date: Aug 2001 Location: Kansas City, Mo Posts: 1,031	Re: Project 67 GMC A few more pictures Attached Images __________________ DREW67

09-19-2007, 09:35 PM	#3
DREW67 Senior Member Join Date: Aug 2001 Location: Kansas City, Mo Posts: 1,031	Re: Project 67 GMC More Attached Images __________________ DREW67

09-19-2007, 10:15 PM	#4
OlChev67 Ever heard of Beech Island?? Join Date: Apr 2007 Location: Clemson, SC Posts: 327	Re: Project 67 GMC thats a beauty

09-19-2007, 10:22 PM	#5
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Re: Project 67 GMC With grear work like that your welcome to help on my truck any day

09-19-2007, 10:22 PM	#6
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	Re: Project 67 GMC Thats going to be Sharp!! looks like youve come along way with it. How about the good looking short fleet you have beside it.. Got any pics of it? __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

09-19-2007, 11:27 PM	#7
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: Project 67 GMC That is one BADass small windowed short stepper! __________________ The first '67 The current '67 '63 Biscayne

09-20-2007, 12:13 AM	#8
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,033	Re: Project 67 GMC That is a super nice looking step __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

09-20-2007, 07:08 AM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Project 67 GMC Fantastic job!!Sweet`67...GMC!!! __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-20-2007, 08:24 AM	#10
DREW67 Senior Member Join Date: Aug 2001 Location: Kansas City, Mo Posts: 1,031	Re: Project 67 GMC Thanks for the comments. This is what I started with. Attached Images __________________ DREW67

09-20-2007, 08:47 AM	#11
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	Re: Project 67 GMC Andrew ,Wow that is a nice rust free GMC. Nice detail on the wood floor and hardware with those colors. My 67 GMC Cab looks about the same. I also have some very nice original 67 GMC Custom pieces from mine that I won't be using when you come up. Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

09-20-2007, 06:24 PM	#12
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,705	Re: Project 67 GMC Andrew, The truck sure looked good when I was over ther Sunday! Guys, This thing was so clean on the under side!! What a perfect truck to start with! Looking good!!!!!!!!!! __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

09-20-2007, 07:10 PM	#13
DREW67 Senior Member Join Date: Aug 2001 Location: Kansas City, Mo Posts: 1,031	Re: Project 67 GMC Joe when you where over on Sunday my wife said she knew which truck was yours. __________________ DREW67 Last edited by DREW67; 09-20-2007 at 07:10 PM.

09-20-2007, 07:38 PM	#14
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: Project 67 GMC "NICE" I think the small window step is the ultimate in style.The small window just gives it an oldstyle cue as does the step bed.Finding one with that little rust sure makes a project easier. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

09-20-2007, 09:20 PM	#16
turner15 Registered User Join Date: Jan 2007 Location: Toronto Canada Posts: 265	Re: Project 67 GMC I'd like to see a shot of the grill.



Register or Log In To remove these advertisements.

10-10-2007, 07:21 PM	#17
DREW67 Senior Member Join Date: Aug 2001 Location: Kansas City, Mo Posts: 1,031	Re: Project 67 GMC Here are pictures with the wheels and grill on. Attached Images __________________ DREW67

10-10-2007, 07:25 PM	#18
sb69chevy Registered User Join Date: Oct 2006 Location: Springfield, MO Posts: 375	Re: Project 67 GMC Beautiful truck you have there, and cool color __________________ 1969 C/10 swb, 350, powerglide (daily driver) 2005 CRV (wife's ride)

10-10-2007, 10:37 PM	#19
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,705	Re: Project 67 GMC WOW Andrew, That looks great!!!! I still want to buy the old wheels and tires off that truck. I need to come buy and see it again! __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

10-11-2007, 08:03 AM	#21
DREW67 Senior Member Join Date: Aug 2001 Location: Kansas City, Mo Posts: 1,031	Re: Project 67 GMC Thanks Guys! Joe yeah come over with the 72 3/4 so I can show my wife maybe she will give in. __________________ DREW67

05-24-2008, 06:46 AM	#22
andrewt2 Registered User Join Date: Oct 2007 Location: Carbondale, Kansas Posts: 547	Re: Project 67 GMC This truck is beautiful any recent photos of it? wish you could make it to the midwest members board meet we got scheduled for the 31st of this month in NE! this looks like an amazing truck... TTT

05-24-2008, 08:26 AM	#23
whatnow123 Registered User Join Date: Oct 2006 Location: Arizona Posts: 835	Re: Project 67 GMC Man that is nice!! Question, can you tell me where you got the tail lights and some info on them? __________________ 67 Short Step, 355, 700R 4.11 posi rear, 4/6 drop Discs on all 4 corners. Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=219094

05-24-2008, 08:50 AM	#24
otsenre Registered User Join Date: Feb 2007 Location: Colorado Springs, Co Posts: 1,939	Re: Project 67 GMC Very nice Drew! I would be scared to drop that 402 in there without removing the front clip.

05-24-2008, 01:30 PM	#25
Gray Ghost Senior Member Join Date: Sep 2004 Location: Terrell, TX Posts: 1,967	Re: Project 67 GMC Wow, that's a looker now! You have done a fine job on your truck. What's the color? __________________ Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.