350/3 speed/ rockwell in northern MN - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 09-19-2007, 08:40 PM

These are not going to be used in my project so here goes: Looks like a 71 350 with a 3 speed manual trans and a rockwell 221 trans case. I know nothing about any of it as it has been sitting for many years. Ramshorns and power steering not included. The engine turns a little bit and then stops. $175 NO shipping.

**too much stuff** · 09-21-2007, 08:42 PM

ttt

**jerry moss** · 09-21-2007, 10:04 PM

would you be interested in selling the bellcrank for the clutch linkage ? if so, shipping to 94513 business address.

Blue_71 · 09-21-2007, 10:25 PM

hey jerry, if he's not wanting to part, and you can get me a length measurement, i may have one

**jerry moss** · 09-21-2007, 10:34 PM

blue 71,
i'll let you know, thanks for the reply.

**too much stuff** · 09-23-2007, 02:07 PM

Jerry, are you just needing the part from the block to the frame? Is it 4x4 specific, or is a 2wd the same? Eric

**jerry moss** · 09-23-2007, 02:19 PM

Eric,
yes, just the part from the frame to the block. and yes, they are 4x4 specific. thanks.
jerry

09-19-2007, 08:40 PM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,717	350/3 speed/ rockwell in northern MN These are not going to be used in my project so here goes: Looks like a 71 350 with a 3 speed manual trans and a rockwell 221 trans case. I know nothing about any of it as it has been sitting for many years. Ramshorns and power steering not included. The engine turns a little bit and then stops. $175 NO shipping. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

09-21-2007, 08:42 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,717	Re: 350/3 speed/ rockwell in northern MN ttt __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

09-21-2007, 10:04 PM	#3
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,861	Re: 350/3 speed/ rockwell in northern MN would you be interested in selling the bellcrank for the clutch linkage ? if so, shipping to 94513 business address. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

09-21-2007, 10:34 PM	#5
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,861	Re: 350/3 speed/ rockwell in northern MN blue 71, i'll let you know, thanks for the reply. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

09-23-2007, 02:07 PM	#6
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,717	Re: 350/3 speed/ rockwell in northern MN Jerry, are you just needing the part from the block to the frame? Is it 4x4 specific, or is a 2wd the same? Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

09-23-2007, 02:19 PM	#7
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,861	Re: 350/3 speed/ rockwell in northern MN Eric, yes, just the part from the frame to the block. and yes, they are 4x4 specific. thanks. jerry __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.