Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
07-23-2007, 02:18 PM | #1 |
Registered User
Join Date: Jul 2007
Location: hooper ut
Posts: 77
|
five lug front conversion
i have a 68 i was told that you could use the front spindules off a 85 or older should work but the guy before converted it to a 3/4 ton can i just change out the ball joints or do i need the hole a arm ?
Last edited by trukindud; 07-23-2007 at 02:19 PM. |
07-23-2007, 08:28 PM | #2 |
Designated A-hole!
Join Date: Mar 2003
Location: South Mississippi
Posts: 36,448
|
Re: five lug front conversion
Welcome to the board from South Mississippi! When he converted it to 3/4 ton did he change the control arms or just the spindles?
__________________
"If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck" |
10-07-2007, 11:49 AM | #3 |
Registered User
Join Date: Jul 2007
Location: hooper ut
Posts: 77
|
Re: five lug front conversion
hole thing
|
10-07-2007, 03:35 PM | #4 |
Registered User
Join Date: Jan 2007
Location: Opdyke, IL
Posts: 775
|
Re: five lug front conversion
About the only difference between 1/2 and 3/4 ton trucks are the springs, spindles, and rear axles. If you're wanting to convert to 1/2 ton 5 bolt then swap in 1/2 ton springs, spindles. Of course you'll have to change the rear end to 5 bolt too if you want it to match. Pretty simple swap. You don't HAVE to change the front crossmember but a lot of guys do.
__________________
1978 Chevrolet Silverado 3/4 ton 400 small block. 2000 F-250 Powerstroke 2002 GMC Yukon Denali XL |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|