|
10-05-2007, 08:30 PM
|
#1 |
|
yes, i do
Join Date: Jun 2007
Location: Spokane, wa
Posts: 2,734
|
did i get a good deal
ok, so here's the deal. the crank is going out in my truck and so i went to the local machine shop and got a crank for $90 that has been gound 10/10. it needed a polish cause there was a little bit of corrosion on it, nothing major, so i told the guy i'd give him $100 for the crank and for him to polish it. he didn't have any bearings for it at the time so i went to schucks and got bearings for $92. he told me that he could get me a full set for $50 and i went with that so did i get a good deal for $150 total??
|
|
|
|
10-08-2007, 05:16 PM
|
#2 |
|
Registered User
Join Date: May 2007
Location: Moore, Oklahoma
Posts: 2,396
|
Re: did i get a good deal
not bad at all when you consider an aftermarket SCAT crank would cost at least 250
|
|
|
|
|
10-08-2007, 07:57 PM
|
#3 |
|
Registered User
Join Date: Feb 2007
Location: Los Angeles
Posts: 674
|
Re: did i get a good deal
how do you know your crank is going out?
|
|
|
|
|
10-09-2007, 12:09 AM
|
#4 |
|
yes, i do
Join Date: Jun 2007
Location: Spokane, wa
Posts: 2,734
|
Re: did i get a good deal
a slightly noticeable knock when the motor gets warm, low oil pressure when warm, like below 10 psi
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
