CPP Front and Rear Disc Brake Kit - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mkhutch · 10-01-2007, 02:01 PM

What we have here is a full front and rear disc brake kit for 67-72 trucks. The rotors have been zinc-washed, cross drilled and slotted. All calipers have been painted high-temp silver paint and the rear calipers are made with E-brake setup. The rear caliper brackets have been powder coated black. The kit has been mounted, but not used as the project never made it that far. All bearings have been packed and will ship in ziploc bag, but you will probably need new seals. PM with any questions. Asking $1000 shipped OBO.

Thanks

bad 71 chevy · 10-01-2007, 03:09 PM

if some one just wants the front i would like to see what u would want for the rear setup thanks all so how big are the rotors and what kind of calipers

72BBCTRUCK · 10-01-2007, 04:15 PM

I would be very interested. Does the kit come with booster and master cyl. prop valve, ect. (the kit they show on there web site)?

mkhutch · 10-01-2007, 04:29 PM

No its not the full kit. THe full kit at $1500 has the booster, etc. THis si just the rotors, calipers, pads, hardware.

Thanks

72BBCTRUCK · 10-01-2007, 07:23 PM

ok thanks, I was really looking for the full kit, but I'll keep it in mind.

mkhutch · 10-02-2007, 11:12 AM

No problem. It might be cheaper to add on a Booster and whatever you separately though.

mdlackey · 10-04-2007, 08:12 PM

I'd be interested in the front setup, but would need to know what kind of price we're looking at, if you broke the kit up ... ??? 5-lug or 6-lug hubs?

Plus, I'm in Denver, Bad71

Thanks,
Dave

mkhutch · 10-04-2007, 09:18 PM

This setup is for a 5 on 5 lug setup. A few replies earlier BAD 71 wants the rear. He is also in Colorado. I would PM him and see if you two could maybe work something out. I'll PM Bad71 and see what he would like to do.

mkhutch · 10-05-2007, 08:52 AM

Hey Mdlackey, talked to Bad71, he is out. If soemone else is interested in front only, maybe we can work something out. For now though, I would like to keep it as a set.

bad 71 chevy · 10-05-2007, 11:03 AM

i would like the rear disk setup but i am going to spend money on go fast parts then bother with the stopping problem

i figure if i ever get fast enough that i have trouble stopping then i will address that problem when i get to it but for know i want to go fast

mkhutch · 10-07-2007, 01:36 PM

ttt, still available. Make Offer!!!

mkhutch · 10-13-2007, 10:35 AM

bring all offers! Must go!

mkhutch · 10-16-2007, 10:37 PM

ttt, get them gone!

mkhutch · 10-21-2007, 01:09 PM

no ebay, make offer please!

indy72stepside · 10-22-2007, 09:30 PM

if you are willing to split the setup, I may be interested in the rear

Jeremy

mkhutch · 10-22-2007, 09:44 PM

I Can split the set up no problem, just rather have both sets accounted for prior to splitting

mkhutch · 10-26-2007, 07:55 PM

ttt

70rs/ss · 10-27-2007, 01:39 AM

Sending a PM

10-01-2007, 02:01 PM	#1
mkhutch Throbbing Member Join Date: Jul 2006 Location: McDonough, GA Posts: 350	CPP Front and Rear Disc Brake Kit What we have here is a full front and rear disc brake kit for 67-72 trucks. The rotors have been zinc-washed, cross drilled and slotted. All calipers have been painted high-temp silver paint and the rear calipers are made with E-brake setup. The rear caliper brackets have been powder coated black. The kit has been mounted, but not used as the project never made it that far. All bearings have been packed and will ship in ziploc bag, but you will probably need new seals. PM with any questions. Asking $1000 shipped OBO. Thanks

10-01-2007, 03:09 PM	#2
bad 71 chevy Registered User Join Date: Jun 2000 Location: Omaha NE 68122 Posts: 637	Re: CPP Front and Rear Disc Brake Kit if some one just wants the front i would like to see what u would want for the rear setup thanks all so how big are the rotors and what kind of calipers __________________ 71 Chevy C/10 lwb 350 5 speed nv3500 3.73 rear end 2.5" Front Drop and 4" in the back Edelbrock perfomer rpm manifold Edelbrock 600 cfm carb Headmen headers Last edited by bad 71 chevy; 10-01-2007 at 03:40 PM.

10-01-2007, 04:15 PM	#3
72BBCTRUCK Registered User Join Date: Feb 2007 Location: Lafayette, ga Posts: 7	Re: CPP Front and Rear Disc Brake Kit I would be very interested. Does the kit come with booster and master cyl. prop valve, ect. (the kit they show on there web site)?

10-01-2007, 04:29 PM	#4
mkhutch Throbbing Member Join Date: Jul 2006 Location: McDonough, GA Posts: 350	Re: CPP Front and Rear Disc Brake Kit No its not the full kit. THe full kit at $1500 has the booster, etc. THis si just the rotors, calipers, pads, hardware. Thanks

10-01-2007, 07:23 PM	#5
72BBCTRUCK Registered User Join Date: Feb 2007 Location: Lafayette, ga Posts: 7	Re: CPP Front and Rear Disc Brake Kit ok thanks, I was really looking for the full kit, but I'll keep it in mind.

10-02-2007, 11:12 AM	#6
mkhutch Throbbing Member Join Date: Jul 2006 Location: McDonough, GA Posts: 350	Re: CPP Front and Rear Disc Brake Kit No problem. It might be cheaper to add on a Booster and whatever you separately though.

10-04-2007, 08:12 PM	#7
mdlackey Registered User Join Date: May 2006 Location: Denver ,CO Posts: 47	Re: CPP Front and Rear Disc Brake Kit I'd be interested in the front setup, but would need to know what kind of price we're looking at, if you broke the kit up ... ??? 5-lug or 6-lug hubs? Plus, I'm in Denver, Bad71 Thanks, Dave

10-04-2007, 09:18 PM	#8
mkhutch Throbbing Member Join Date: Jul 2006 Location: McDonough, GA Posts: 350	Re: CPP Front and Rear Disc Brake Kit This setup is for a 5 on 5 lug setup. A few replies earlier BAD 71 wants the rear. He is also in Colorado. I would PM him and see if you two could maybe work something out. I'll PM Bad71 and see what he would like to do.

10-05-2007, 08:52 AM	#9
mkhutch Throbbing Member Join Date: Jul 2006 Location: McDonough, GA Posts: 350	Re: CPP Front and Rear Disc Brake Kit Hey Mdlackey, talked to Bad71, he is out. If soemone else is interested in front only, maybe we can work something out. For now though, I would like to keep it as a set.

10-05-2007, 11:03 AM	#10
bad 71 chevy Registered User Join Date: Jun 2000 Location: Omaha NE 68122 Posts: 637	Re: CPP Front and Rear Disc Brake Kit i would like the rear disk setup but i am going to spend money on go fast parts then bother with the stopping problem i figure if i ever get fast enough that i have trouble stopping then i will address that problem when i get to it but for know i want to go fast __________________ 71 Chevy C/10 lwb 350 5 speed nv3500 3.73 rear end 2.5" Front Drop and 4" in the back Edelbrock perfomer rpm manifold Edelbrock 600 cfm carb Headmen headers

10-07-2007, 01:36 PM	#11
mkhutch Throbbing Member Join Date: Jul 2006 Location: McDonough, GA Posts: 350	Re: CPP Front and Rear Disc Brake Kit ttt, still available. Make Offer!!!

10-13-2007, 10:35 AM	#12
mkhutch Throbbing Member Join Date: Jul 2006 Location: McDonough, GA Posts: 350	Re: CPP Front and Rear Disc Brake Kit bring all offers! Must go!

10-16-2007, 10:37 PM	#13
mkhutch Throbbing Member Join Date: Jul 2006 Location: McDonough, GA Posts: 350	Re: CPP Front and Rear Disc Brake Kit ttt, get them gone!

10-21-2007, 01:09 PM	#14
mkhutch Throbbing Member Join Date: Jul 2006 Location: McDonough, GA Posts: 350	Re: CPP Front and Rear Disc Brake Kit no ebay, make offer please!

10-22-2007, 09:30 PM	#15
indy72stepside Registered User Join Date: May 2002 Location: Jeffersonville, IN Posts: 67	Re: CPP Front and Rear Disc Brake Kit if you are willing to split the setup, I may be interested in the rear Jeremy __________________ 72 Chevy stepside shortbed 327 (currently) auto 3.73 posi 97 Chevy K2500 Turbo diesel (for sale) 03 DURAMAX crew cab 4x4 this truck kick butt



Register or Log In To remove these advertisements.

10-22-2007, 09:44 PM	#16
mkhutch Throbbing Member Join Date: Jul 2006 Location: McDonough, GA Posts: 350	Re: CPP Front and Rear Disc Brake Kit I Can split the set up no problem, just rather have both sets accounted for prior to splitting

10-26-2007, 07:55 PM	#17
mkhutch Throbbing Member Join Date: Jul 2006 Location: McDonough, GA Posts: 350	Re: CPP Front and Rear Disc Brake Kit ttt

10-27-2007, 01:39 AM	#18
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: CPP Front and Rear Disc Brake Kit Sending a PM

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.