License plate bracket question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Big J · 10-16-2007, 02:56 PM

I've got the reciever hitch welded up for my blazer. Its behind the license plate bracket/holder.... I've seen a flip up plate before. Is this something readily available or something I'm going to have to fab?

Angelse68cal · 10-16-2007, 03:45 PM

You can get it from Brothers trucks new or.... you can go to the junk yard and get it of an old Chevrolet passenger car that fills up behind the License plate. Like Fire birds, Monte Carlo's Buick Regals Olds Cutlass. these type All it is ....Is a flip down license plate holder so you were able to put gas back in the day.

Angelse68cal · 10-16-2007, 03:48 PM

Pic of what they look like

Big J · 10-19-2007, 01:52 PM

Awesome! Thanks for the help.

bouncytruck · 10-19-2007, 02:04 PM

I think sites like JC Whittney sell similar type deals, but I don't know how they fit on our trucks.

Post some pics of your hitch when you get a chance.

69TowRig · 10-27-2007, 08:47 PM

When I bought my Early Classic hitch I bought the kit that had the flip-up with it. They sell it separately as well.

10-16-2007, 02:56 PM	#1
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,772	License plate bracket question I've got the reciever hitch welded up for my blazer. Its behind the license plate bracket/holder.... I've seen a flip up plate before. Is this something readily available or something I'm going to have to fab? __________________ BAZINGA! My Build

10-16-2007, 03:45 PM	#2
Angelse68cal Cochino_Racing_909 Join Date: Oct 2006 Location: California Posts: 280	Re: License plate bracket question You can get it from Brothers trucks new or.... you can go to the junk yard and get it of an old Chevrolet passenger car that fills up behind the License plate. Like Fire birds, Monte Carlo's Buick Regals Olds Cutlass. these type All it is ....Is a flip down license plate holder so you were able to put gas back in the day.

10-16-2007, 03:48 PM	#3
Angelse68cal Cochino_Racing_909 Join Date: Oct 2006 Location: California Posts: 280	Re: License plate bracket question Pic of what they look like Attached Images

10-19-2007, 01:52 PM	#4
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,772	Re: License plate bracket question Awesome! Thanks for the help. __________________ BAZINGA! My Build

10-19-2007, 02:04 PM	#5
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Re: License plate bracket question I think sites like JC Whittney sell similar type deals, but I don't know how they fit on our trucks. Post some pics of your hitch when you get a chance. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

10-27-2007, 08:47 PM	#6
69TowRig Senior Member Join Date: Jan 2005 Location: Raleigh, NC Posts: 894	Re: License plate bracket question When I bought my Early Classic hitch I bought the kit that had the flip-up with it. They sell it separately as well. __________________ -Chris Building a stripper, one part at a time: 1969 K5, 307, 3spd, 3 seats, hard top. Added Pwr Discs, Pwr Steering, Aux Battery, T-case Skid, Lighted Sidemarkers, HEI, Lock-Right Diff, ECE Class IV Hitch, 32" MT/Rs. Parts to Install: Hand Throttle, Console, Tow Hooks, Dual Horns, AM-FM, Dealer Swing-Away Tire Carrier, Gas Tank Skid. Also building a 1950 Willys CJ-3A and off-roading a 2001 Nissan Frontier on 1-Ton Portals...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.