Front tag - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Andy4639 · 10-29-2007, 12:56 AM

Who has the front tag recessed in there bumper? Did you make it or buy it? I'm wanting to do mine and was wondering if I can buy one or going to have to make it. Anybody got a picture or how to on it.

CG · 10-29-2007, 01:02 AM

I dont think Ive seen one done this way.

Funny how so many guys call the plates tags. We call em plates here and the little expiration sticker is the tag.

**special-K** · 10-29-2007, 07:18 AM

We call`em stickers.I guess it goes back to original licensing.You`d get a "tag" once registration was paid,just like a hunting license.The plate came along as a better way to permanently display registration.I think it`s funny how many people refer to their license as plural..."I lost my license.I need to get them back".That would be licenses if there were more than one.

I`ve never seen it done on these trucks.It would be a nice mod.I wonder if you could cut it out and use a rescess from a car rear bumper.

Andy4639 · 10-29-2007, 09:33 AM

special-K, CG,

The tag is the metal part and has a sticker in the bottom cornner's of it. Registration is the paper work you have in the car with you!
This is what I want to know is there a car bumper that can be used or am I going to have to build it from scratch. Give me some idea's for this.

**BIG ORANGE** · 10-30-2007, 11:50 AM

Not a complete subject change but I'm thinking of narrowing the bumper's on project Buck formally named project big orange! Gonna install 67/70 front bumper gaurds by welding them in place and shave all the bolt heads off then sending the bumpers to Advance plating in Tenn. for chrome plating!
Good luck on the recessed lic. plate sounds interesting!

67_C-30 · 10-30-2007, 12:18 PM

Quote:

Originally Posted by Andy4639

special-K, CG,

The tag is the metal part and has a sticker in the bottom cornner's of it. Registration is the paper work you have in the car with you!
This is what I want to know is there a car bumper that can be used or am I going to have to build it from scratch. Give me some idea's for this.

Agreed! Yankees are silly!!

- j/k

caminokid · 10-30-2007, 12:20 PM

Quote:

Originally Posted by CG

Funny how so many guys call the plates tags. We call em plates here and the little expiration sticker is the tag.

I agree.

Andy4639 · 10-30-2007, 06:52 PM

OK,
So much for the tag differances. I would like to see some front bumper tag mods that have been done with a factory bumper. What has everyone done with their tags stickers whatever!

**special-K** · 10-31-2007, 08:53 AM

Hey...I was agreeing."We call`em stickers" was refering to the sticker which CG calls the tag.

About the bumper...You call that "recessing" the "tag" into the bumper.I call it "frenching" the "tag" into the bumper.

...I`m right,you`re wrong

I hope someone can pull you something up.But,at least we`re learning how to talk.

67_C-30 · 10-31-2007, 09:02 AM

Quote:

Originally Posted by special-K

Hey...I was agreeing."We call`em stickers" was refering to the sticker which CG calls the tag.

About the bumper...You call that "recessing" the "tag" into the bumper.I call it "frenching" the "tag" into the bumper.

...I`m right,you`re wrong

I hope someone can pull you something up.But,at least we`re learning how to talk.

LOL! I think the moral of the story is there aren't many 67-72's out there with their tags/plates/stickers recessed/frenched/smoothed into bumper.

Andy4639 · 10-31-2007, 03:45 PM

OK took the bumper to REDNECK Engineering (motor cycles)today and they are Frenching in the area for the front tag for me. They said it would be ready by Friday afternoon! I'll post pictures as soon as I can.

special-K,

Quote:

You call that "recessing" the "tag" into the bumper.I call it "frenching" the "tag" into the bumper

No problem, I was just playing along. Call it what ever. As long as we agree that's what counts. I never took French in school so I don't know their language.
I'm more a SC REDNECK kind of guy.

weasel29gm · 10-31-2007, 07:14 PM

Plates.... Tags..... Stickers..... Here we just use Cardboard!!!! LOL!!!!

Andy4639 · 11-01-2007, 04:02 AM

That's what I gave them to mock up the area with.

10-29-2007, 12:56 AM	#1
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Front tag Who has the front tag recessed in there bumper? Did you make it or buy it? I'm wanting to do mine and was wondering if I can buy one or going to have to make it. Anybody got a picture or how to on it. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

10-29-2007, 01:02 AM	#2
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 20,019	Re: Front tag I dont think Ive seen one done this way. Funny how so many guys call the plates tags. We call em plates here and the little expiration sticker is the tag.

10-29-2007, 07:18 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Front tag We call`em stickers.I guess it goes back to original licensing.You`d get a "tag" once registration was paid,just like a hunting license.The plate came along as a better way to permanently display registration.I think it`s funny how many people refer to their license as plural..."I lost my license.I need to get them back".That would be licenses if there were more than one. I`ve never seen it done on these trucks.It would be a nice mod.I wonder if you could cut it out and use a rescess from a car rear bumper. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-29-2007, 09:33 AM	#4
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Front tag special-K, CG, The tag is the metal part and has a sticker in the bottom cornner's of it. Registration is the paper work you have in the car with you! This is what I want to know is there a car bumper that can be used or am I going to have to build it from scratch. Give me some idea's for this. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

10-30-2007, 11:50 AM	#5
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,764	Re: Front tag Not a complete subject change but I'm thinking of narrowing the bumper's on project Buck formally named project big orange! Gonna install 67/70 front bumper gaurds by welding them in place and shave all the bolt heads off then sending the bumpers to Advance plating in Tenn. for chrome plating! Good luck on the recessed lic. plate sounds interesting! __________________ Things happen for a reason!

10-30-2007, 06:52 PM	#8
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Front tag OK, So much for the tag differances. I would like to see some front bumper tag mods that have been done with a factory bumper. What has everyone done with their tags stickers whatever! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

10-31-2007, 08:53 AM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Front tag Hey...I was agreeing."We call`em stickers" was refering to the sticker which CG calls the tag. About the bumper...You call that "recessing" the "tag" into the bumper.I call it "frenching" the "tag" into the bumper....I`m right,you`re wrong I hope someone can pull you something up.But,at least we`re learning how to talk. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-31-2007, 07:14 PM	#12
weasel29gm SLOW BUT SURE,BUT CLOSER Join Date: Feb 2002 Location: eleanor wv usa Posts: 3,096	Re: Front tag Plates.... Tags..... Stickers..... Here we just use Cardboard!!!! LOL!!!! __________________ 69 C-10, OWNED 38YRS... 350 over 30, 350 Turbo, 3:73 Posi P/S, P/B Black with red and black int. ''LOVE THESE OLD ''TRUCKS.......

11-01-2007, 04:02 AM	#13
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Front tag That's what I gave them to mock up the area with. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.