stock hieght? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

orange72 · 01-04-2003, 02:37 AM

can anyone tell me the distance of a stock truck from the top of the fender lip to the hub. thanks

**PICKMUP** · 01-04-2003, 04:19 AM

2WD, 4WD, 6cyl, SB, BB, 1/2T, 3/4T, SWB, LWB, HD, Camper??? They are all different. So when you read a company offers a 4" or 6" drop spring, your truck may not change exactly that much, depending on what you had to start with.

orange72 · 01-04-2003, 11:10 AM

i didnt even think about the type of truck. its a 1/2t 2wd with a 350 that i want to know about. apreciate it.

**Palf70Step** · 01-04-2003, 11:33 AM

I knew at one time, but I can't measure now as I don't have any fenders. You could always try a search. Someone asked about this a while back.

Dandeluxe · 01-04-2003, 01:18 PM

PIC. OF STOCK

**PICKMUP** · 01-04-2003, 01:32 PM

Here is another 1/2T, 71 that is bone stock, but notice how it does not sit the same as the red one above. A long bed has more weight in the rear, so it should set lower...unless GM compensated with stronger springs. I think you are just going to have to look at/measure a few trucks to get a ballpark.

**PICKMUP** · 01-04-2003, 01:33 PM

LWB original.

GMC Jim · 01-04-2003, 03:45 PM

...Per L&M catalog ( page 97) ; height measured from top of wheel well arch to the ground is approximatley 32" at front; 34" rear ...........

orange72 · 01-04-2003, 07:46 PM

yea i remember somebody asking this question before and i dont know why i measured then. measuring from the top of arch to ground i have a 3" 4" drop but i wanted to get one from top of arch to hub since tire size and wheel makes it vary. thanks

pat · 01-04-2003, 08:02 PM

Hey orange72, do you mind posting a bigger pic of the gray truck in your signature?, looks really cool.

orange72 · 01-04-2003, 08:16 PM

here you go. its a different pic.

pat · 01-04-2003, 08:54 PM

Nice truck. What size tires/rims do you have?
Also, how did you go about lowering it? Coils, spindles, measurements? Thanks

01-04-2003, 02:37 AM	#1
orange72 Registered User Join Date: Sep 2000 Location: huntington,texas,united states Posts: 399	stock hieght? can anyone tell me the distance of a stock truck from the top of the fender lip to the hub. thanks __________________ 1972 chevy long bed. Currently under construction!! Bagged, 383/700r4.

01-04-2003, 04:19 AM	#2
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	??????? 2WD, 4WD, 6cyl, SB, BB, 1/2T, 3/4T, SWB, LWB, HD, Camper??? They are all different. So when you read a company offers a 4" or 6" drop spring, your truck may not change exactly that much, depending on what you had to start with. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

01-04-2003, 11:10 AM	#3
orange72 Registered User Join Date: Sep 2000 Location: huntington,texas,united states Posts: 399	i didnt even think about the type of truck. its a 1/2t 2wd with a 350 that i want to know about. apreciate it. __________________ 1972 chevy long bed. Currently under construction!! Bagged, 383/700r4.

01-04-2003, 11:33 AM	#4
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	I knew at one time, but I can't measure now as I don't have any fenders. You could always try a search. Someone asked about this a while back. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

01-04-2003, 01:18 PM	#5
Dandeluxe Senior Member Join Date: Nov 2001 Location: st.louis mo. Posts: 717	PIC. OF STOCK HEIGHT PIC. OF STOCK Attached Images __________________ 1969 cst swb 350/400 th . DANNY C . ["]FRIENDS DONT LET FRIENDS DRIVE F@RD$!! 1969 cst swb corvette hugger orange with 400 hp sbc I started out with nothing and i held on to it

01-04-2003, 01:32 PM	#6
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Rock Stock Here is another 1/2T, 71 that is bone stock, but notice how it does not sit the same as the red one above. A long bed has more weight in the rear, so it should set lower...unless GM compensated with stronger springs. I think you are just going to have to look at/measure a few trucks to get a ballpark. Attached Images __________________ Email: frankeham@comcast.net Phone: 360-956-7170

01-04-2003, 01:33 PM	#7
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	LWB LWB original. Attached Images __________________ Email: frankeham@comcast.net Phone: 360-956-7170

01-04-2003, 03:45 PM	#8
GMC Jim Senior Member Join Date: Dec 2002 Location: Portland, Oregon Posts: 901	...Per L&M catalog ( page 97) ; height measured from top of wheel well arch to the ground is approximatley 32" at front; 34" rear ........... __________________ '71 GMC;fleetside;PB/PS/AC/CC/402 Eng./Custom Paint/110,000act miles/3 fuel tanks(52gal).

01-04-2003, 07:46 PM	#9
orange72 Registered User Join Date: Sep 2000 Location: huntington,texas,united states Posts: 399	yea i remember somebody asking this question before and i dont know why i measured then. measuring from the top of arch to ground i have a 3" 4" drop but i wanted to get one from top of arch to hub since tire size and wheel makes it vary. thanks __________________ 1972 chevy long bed. Currently under construction!! Bagged, 383/700r4.

01-04-2003, 08:02 PM	#10
pat Senior Member Join Date: Jul 2002 Location: Lindsay, TX Posts: 1,245	Hey orange72, do you mind posting a bigger pic of the gray truck in your signature?, looks really cool. __________________ 68 Chevy 383/350 w/shift kit, 380hp/425ft-lbs, 4.5/5 drop, 17" TT2s 64 Cadillac Sedan DeVille

01-04-2003, 08:16 PM	#11
orange72 Registered User Join Date: Sep 2000 Location: huntington,texas,united states Posts: 399	here you go. its a different pic. Attached Images __________________ 1972 chevy long bed. Currently under construction!! Bagged, 383/700r4.

01-04-2003, 08:54 PM	#12
pat Senior Member Join Date: Jul 2002 Location: Lindsay, TX Posts: 1,245	Nice truck. What size tires/rims do you have? Also, how did you go about lowering it? Coils, spindles, measurements? Thanks __________________ 68 Chevy 383/350 w/shift kit, 380hp/425ft-lbs, 4.5/5 drop, 17" TT2s 64 Cadillac Sedan DeVille Last edited by pat; 01-04-2003 at 08:57 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.