70 Big block chevy just in - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 11-05-2007, 07:06 PM

OK NO motor or tranny. I got this and parted it out today. Has MANUAL THROTTLE, the hole was in firewall by wiper motor, not a factory hole. So I'm not sure if its been cut off or not, I can measure it if needed. I have the BB motor stands, sway bar and other stuff see pics. I have to take drivers fender, PS box, hood hinges, AC box on firewall yet. Ask and I'll price or I'll price in awhile, I got to go get the kids now. Thanks Randy

teeitup · 11-05-2007, 07:08 PM

pic

teeitup · 11-05-2007, 07:10 PM

pics

teeitup · 11-05-2007, 07:12 PM

picss

**Classic Bowties** · 11-05-2007, 07:15 PM

Did you get any of the BBC air brackets with this one, if so which ones and how much shipped to Oregon business Zip 97233? Also interested in the pictured trans link. frame pivot. Thanks, Cb

jay_shy · 11-05-2007, 07:17 PM

Interested in manual throttle. Is it complete. Shipping would be to 16635. If everything is included to mount the cargo light could you give me a total for the throttle and another with the throttle and the cargo light.

Thanks
Jason

**too much stuff** · 11-05-2007, 07:17 PM

Hey randy, is the gas pedal any good? 396 emblems? Or 400. 400 would be correct if it is a 70. I will keep looking at pics...

SHORTBEDBOB · 11-05-2007, 07:35 PM

Randy Please put me in for the wing windows. Price and shipping to 07838
Thanks Bob

David Johnson · 11-05-2007, 07:46 PM

I'd like dibs on the BB stands and put me in line for the A/C brackets if CB doesn't want them. Shipping is to 74873. Thanks

toomanytoyz · 11-05-2007, 07:57 PM

Interested in Wing Windows & Cargo Light............

Rick

**thelonerife** · 11-05-2007, 08:33 PM

Could I get a price for the door edge guards, emer.brake rubber and trim- And I would like to be second for the vent windows if their factory tinted. My zip is 37043. Is the rear window tinted and custom trimmed? if so could you give me a price on that as well.

**thelonerife** · 11-05-2007, 08:35 PM

Or just in line for the vent windows. Sorry , not jumping line.

teeitup · 11-05-2007, 08:39 PM

Classic Bowites, CB, I didn't get the AC brackets, I was supposed too, but haven't seen them yet. Trans link and frame bracket $25 plus shipping
Jay_Shy, Jason, the throttle is all there, the mount on gas pedal outside firewall is there too. Man Throttle is $45 shipped, cargo light is all there except wiring, some light pitting on top but not real bad $60 shipped for it and man throttle
TooMUCH stuff, Eric, gad pedal is OK, one of the holes is broke off a bit on under side, but it still was attached $10 for it, 400 emblems, not bad but not perfect $10 for pair
Shortbedbob, there are decent condition, some light pitting, and a few cracks in rubber, I'd say a bit better than average $50 plus shipping. I can get better pics in morning if you want
David Johnson, one of the stands middle hole is cut out a bit bigger, not much and wouldn't effect mounting $60 plus shipping, I can get a pic in morning if you want. No AC brackets right now
Toomanytoyz, Rick, $50 for wings and $10 for cargo plus shipping. I got one guy ahead of you on both items
If anyone wants better pics let me know,I can get some Sunday morning
Also if you do want anything please let me know and I'll get shipping price asap.
Thanks Randy

teeitup · 11-05-2007, 08:42 PM

thelonerife, you will be 3rd in line for wings. Door edge guards $12 plus shipping for pair, emergency brake pedal pad and trim $5, Sorry I don't ship windows. As for the trim let me check condition of it. Thanks Randy

jay_shy · 11-05-2007, 08:50 PM

Randy,

I will take them both. How much more to add the pedal and the bracket outside the firewall to mount it.

Also PM me with payment details.

Jason

teeitup · 11-05-2007, 08:56 PM

$65 for it all Jason, it won't have pedal inside just the arm.
Manual Throttle and cargo light are SOLD!!! Thanks Jason, Randy

SHORTBEDBOB · 11-05-2007, 09:01 PM

Ill take the wing windows. PM on the way.
Thanks Bob

72swbcamo · 11-05-2007, 09:04 PM

I'm interested in the headliner molding, are the clips on the back still in tact or did they break when you removed it. How much are you asking?

jay_shy · 11-05-2007, 09:08 PM

Pay-pal sent.

Jason

David Johnson · 11-05-2007, 09:26 PM

I'll take the BB stands. PM sent.

**thelonerife** · 11-05-2007, 09:27 PM

Okay Randy Ill take the edge guards and the e bk pedal & trim. let me know about the shipping cost. I wouldn't be intrested in the trim on the back window if theres any dents. I will need your paypal address also. Thanks.

teeitup · 11-05-2007, 10:48 PM

Shortbedbob, they are yours, I'll get a shipping quote on Sun
72swbcamo, I looked at them ther is 5 clips broke on them, the chrome is not very good, really faded. $15 plus shipping
Jay_Shy, Jason, I'll get it out to you on Mon
David Johnson, they are yours, Pm'd you total
thelonerife, they are yours, pm'd you total

SOLD STUFF
Manual Throttle
cargo light
gas gedal assembly
Chrome wing windows
BB motor stands
E brake pedal pad and chrome
door edge guards
custom gas pedal
Thanks to all, Randy

jeffspower · 11-05-2007, 11:17 PM

I'm still needing stainless mirror tripods- if you come up with some nice "L's" (since those in the pic are rusty) let me know.

David Johnson · 11-05-2007, 11:23 PM

Randy, Interested in the big radiator brackets and the tranny crossmember too. Send me a price. Thanks

teeitup · 11-05-2007, 11:36 PM

Jeff, I'm watching for you a set, yes these are rusty, sorry
David, PM'd you about the holddowns. AT crossmembers are $30 plus shipping each, I got 4 or 5 around here atleast

Thanks Randy.

11-05-2007, 07:06 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	70 Big block chevy just in OK NO motor or tranny. I got this and parted it out today. Has MANUAL THROTTLE, the hole was in firewall by wiper motor, not a factory hole. So I'm not sure if its been cut off or not, I can measure it if needed. I have the BB motor stands, sway bar and other stuff see pics. I have to take drivers fender, PS box, hood hinges, AC box on firewall yet. Ask and I'll price or I'll price in awhile, I got to go get the kids now. Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 11-05-2007 at 08:44 PM.

11-05-2007, 07:08 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 70 Big block chevy just in pic Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-05-2007, 07:10 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 70 Big block chevy just in pics Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-05-2007, 07:12 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 70 Big block chevy just in picss Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-05-2007, 07:15 PM	#5
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,684	Re: 70 Big block chevy just in Did you get any of the BBC air brackets with this one, if so which ones and how much shipped to Oregon business Zip 97233? Also interested in the pictured trans link. frame pivot. Thanks, Cb Last edited by Classic Bowties; 11-05-2007 at 07:18 PM.

11-05-2007, 07:17 PM	#6
jay_shy SWB 4X4 CLUB Join Date: Feb 2005 Location: PA Posts: 1,088	Re: 70 Big block chevy just in Interested in manual throttle. Is it complete. Shipping would be to 16635. If everything is included to mount the cargo light could you give me a total for the throttle and another with the throttle and the cargo light. Thanks Jason Last edited by jay_shy; 11-05-2007 at 07:46 PM. Reason: Added a few questions

11-05-2007, 07:17 PM	#7
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,764	Re: 70 Big block chevy just in Hey randy, is the gas pedal any good? 396 emblems? Or 400. 400 would be correct if it is a 70. I will keep looking at pics... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

11-05-2007, 07:35 PM	#8
SHORTBEDBOB Registered User Join Date: Feb 2007 Location: GREAT MEADOWS NJ Posts: 69	Re: 70 Big block chevy just in Randy Please put me in for the wing windows. Price and shipping to 07838 Thanks Bob

11-05-2007, 07:46 PM	#9
David Johnson Registered User Join Date: Dec 2004 Location: Shawnee, OK Posts: 614	Re: 70 Big block chevy just in I'd like dibs on the BB stands and put me in line for the A/C brackets if CB doesn't want them. Shipping is to 74873. Thanks Last edited by David Johnson; 11-05-2007 at 07:47 PM.

11-05-2007, 07:57 PM	#10
toomanytoyz Luv the Crewcabs Join Date: Aug 2006 Location: Andrews, In. 46702 Posts: 4,097	Re: 70 Big block chevy just in Interested in Wing Windows & Cargo Light............ Rick __________________ 55 Nomad 52 Willys Truck 67 Stepper 67 Fleet 68 Wrecker 68 Suburban 76 Crewcab 79 Gmc Dumptruck 84 Blazer 86 Crewcab Stepside 87 Iroc 89 GMC Plow Truck 91 Camaro Vert 96 Z71 Stepsde

11-05-2007, 08:33 PM	#11
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: 70 Big block chevy just in Could I get a price for the door edge guards, emer.brake rubber and trim- And I would like to be second for the vent windows if their factory tinted. My zip is 37043. Is the rear window tinted and custom trimmed? if so could you give me a price on that as well. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

11-05-2007, 08:35 PM	#12
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: 70 Big block chevy just in Or just in line for the vent windows. Sorry , not jumping line. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

11-05-2007, 08:39 PM	#13
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 70 Big block chevy just in Classic Bowites, CB, I didn't get the AC brackets, I was supposed too, but haven't seen them yet. Trans link and frame bracket $25 plus shipping Jay_Shy, Jason, the throttle is all there, the mount on gas pedal outside firewall is there too. Man Throttle is $45 shipped, cargo light is all there except wiring, some light pitting on top but not real bad $60 shipped for it and man throttle TooMUCH stuff, Eric, gad pedal is OK, one of the holes is broke off a bit on under side, but it still was attached $10 for it, 400 emblems, not bad but not perfect $10 for pair Shortbedbob, there are decent condition, some light pitting, and a few cracks in rubber, I'd say a bit better than average $50 plus shipping. I can get better pics in morning if you want David Johnson, one of the stands middle hole is cut out a bit bigger, not much and wouldn't effect mounting $60 plus shipping, I can get a pic in morning if you want. No AC brackets right now Toomanytoyz, Rick, $50 for wings and $10 for cargo plus shipping. I got one guy ahead of you on both items If anyone wants better pics let me know,I can get some Sunday morning Also if you do want anything please let me know and I'll get shipping price asap. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-05-2007, 08:42 PM	#14
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 70 Big block chevy just in thelonerife, you will be 3rd in line for wings. Door edge guards $12 plus shipping for pair, emergency brake pedal pad and trim $5, Sorry I don't ship windows. As for the trim let me check condition of it. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 11-05-2007 at 08:43 PM.

11-05-2007, 08:50 PM	#15
jay_shy SWB 4X4 CLUB Join Date: Feb 2005 Location: PA Posts: 1,088	Re: 70 Big block chevy just in Randy, I will take them both. How much more to add the pedal and the bracket outside the firewall to mount it. Also PM me with payment details. Jason



Register or Log In To remove these advertisements.

11-05-2007, 08:56 PM	#16
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 70 Big block chevy just in $65 for it all Jason, it won't have pedal inside just the arm. Manual Throttle and cargo light are SOLD!!! Thanks Jason, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-05-2007, 09:01 PM	#17
SHORTBEDBOB Registered User Join Date: Feb 2007 Location: GREAT MEADOWS NJ Posts: 69	Re: 70 Big block chevy just in Ill take the wing windows. PM on the way. Thanks Bob

11-05-2007, 09:04 PM	#18
72swbcamo Active Member Join Date: Dec 2003 Location: Waterbury, CT Posts: 591	Re: 70 Big block chevy just in I'm interested in the headliner molding, are the clips on the back still in tact or did they break when you removed it. How much are you asking?

11-05-2007, 09:08 PM	#19
jay_shy SWB 4X4 CLUB Join Date: Feb 2005 Location: PA Posts: 1,088	Re: 70 Big block chevy just in Pay-pal sent. Jason

11-05-2007, 09:26 PM	#20
David Johnson Registered User Join Date: Dec 2004 Location: Shawnee, OK Posts: 614	Re: 70 Big block chevy just in I'll take the BB stands. PM sent.

11-05-2007, 09:27 PM	#21
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: 70 Big block chevy just in Okay Randy Ill take the edge guards and the e bk pedal & trim. let me know about the shipping cost. I wouldn't be intrested in the trim on the back window if theres any dents. I will need your paypal address also. Thanks. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

11-05-2007, 10:48 PM	#22
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 70 Big block chevy just in Shortbedbob, they are yours, I'll get a shipping quote on Sun 72swbcamo, I looked at them ther is 5 clips broke on them, the chrome is not very good, really faded. $15 plus shipping Jay_Shy, Jason, I'll get it out to you on Mon David Johnson, they are yours, Pm'd you total thelonerife, they are yours, pm'd you total SOLD STUFF Manual Throttle cargo light gas gedal assembly Chrome wing windows BB motor stands E brake pedal pad and chrome door edge guards custom gas pedal Thanks to all, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 11-06-2007 at 11:22 AM.

11-05-2007, 11:17 PM	#23
jeffspower Well, Whoop-dee-do! Join Date: Mar 2003 Location: Easton, Mo. pop.- me & scarcely a few others Posts: 2,302	Re: 70 Big block chevy just in I'm still needing stainless mirror tripods- if you come up with some nice "L's" (since those in the pic are rusty) let me know. __________________ '68 GMC shortbox 4x4 350/SM465/T221- bought it in '83 SOLD '72 K20 500 Cad/TH400/NP205 SOLD '92 Chevy 2500 6.5 mech TD 4L80E crusty daily driver '72 Monte Carlo... sweet low mile toy '11 Dodge Challenger IE 392 6spd... midlife car

11-05-2007, 11:23 PM	#24
David Johnson Registered User Join Date: Dec 2004 Location: Shawnee, OK Posts: 614	Re: 70 Big block chevy just in Randy, Interested in the big radiator brackets and the tranny crossmember too. Send me a price. Thanks

11-05-2007, 11:36 PM	#25
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 70 Big block chevy just in Jeff, I'm watching for you a set, yes these are rusty, sorry David, PM'd you about the holddowns. AT crossmembers are $30 plus shipping each, I got 4 or 5 around here atleast Thanks Randy. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode