Replacement bolts for the front fenders and stuff - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**bigdon-70blazer** · 11-01-2007, 07:46 AM

I have all of the original bolts and such from the disassembly of my 1970 blazer and am planning the re-assembly now. I have heard of complete kits of replacement bolts for the front end sheet metal. Who carries that and who has the most reliable replacements for these. Thanks...

Thealien · 11-01-2007, 09:09 AM

I have seen the bolt sets on ebay but here is
What I DID

**Yukon Jack** · 11-01-2007, 09:57 AM

Thealien - that is very cool and the bolts look great!!!

I did stainless bolts when I put my truck together - my painter decided to leave my box of bolts outside and when I found them they were in terrible shape and I didn't have the patience to try to rehab them.

I ordered my set from Docs House of Bolts.

**bigdon-70blazer** · 11-01-2007, 10:57 PM

Thanks for the info....keep your ideas coming. Anybody done the chrome plating kit from eastwood?

Jvan · 11-08-2007, 09:20 PM

the black oxide is good info if I decide to go that way. But can that be used with new bolts ( I assume yes) but is it cheaper to buy new balck bolts. I don't know if they are available. If anyone know, I 'd like a site.

11-01-2007, 07:46 AM	#1
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,502	Replacement bolts for the front fenders and stuff I have all of the original bolts and such from the disassembly of my 1970 blazer and am planning the re-assembly now. I have heard of complete kits of replacement bolts for the front end sheet metal. Who carries that and who has the most reliable replacements for these. Thanks...

11-01-2007, 09:09 AM	#2
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,125	Re: Replacement bolts for the front fenders and stuff I have seen the bolt sets on ebay but here is What I DID

11-01-2007, 09:57 AM	#3
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,684	Re: Replacement bolts for the front fenders and stuff Thealien - that is very cool and the bolts look great!!! I did stainless bolts when I put my truck together - my painter decided to leave my box of bolts outside and when I found them they were in terrible shape and I didn't have the patience to try to rehab them. I ordered my set from Docs House of Bolts. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

11-01-2007, 10:57 PM	#4
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,502	Re: Replacement bolts for the front fenders and stuff Thanks for the info....keep your ideas coming. Anybody done the chrome plating kit from eastwood?

11-08-2007, 09:20 PM	#5
Jvan Registered User Join Date: Jan 2007 Location: chappaqua, NY Posts: 43	Re: Replacement bolts for the front fenders and stuff the black oxide is good info if I decide to go that way. But can that be used with new bolts ( I assume yes) but is it cheaper to buy new balck bolts. I don't know if they are available. If anyone know, I 'd like a site.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.