serpentine belt question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ace in the hole · 11-12-2007, 10:40 PM

I might be able to pick up a good deal on a new chevy performance parts serpentine belt system, complete- new, never used, but I am wondering if it will bolt up to my old 1970 350 motor? any issues I might run into?

new performance part # 12497697 complete serpentine drive w/o AC

Longhorn Man · 11-12-2007, 10:57 PM

You'll need a reverse rotation water pump, which will stick your fan out a little further. IIRC, a 2 wheel drive fan shroud will be far enough forward that you can place the fan correctly in/out of it.

Ace in the hole · 11-12-2007, 11:02 PM

thanks for the info. I'll be using an electric fan so that should not matter to me but good to know.
the new "serpentine drive" listed above comes with:

new reverse water pump
new alternater
new power steering pump
a/c delete pully
mounting brackets, drive pulleys, hardware & tensioner & belt

Ace in the hole · 11-13-2007, 06:12 AM

anybody know if this will bolt right up or if there are any issues?

**kwmech** · 11-13-2007, 11:31 AM

If the kit is complete there should not be any issues. Got one for my 69 GMC--had everything I needed and more.

Ace in the hole · 11-13-2007, 02:23 PM

cool, thanks

11-12-2007, 10:40 PM	#1
Ace in the hole Registered User Join Date: Apr 2007 Location: Kalamazoo, Michigan, USA Posts: 538	serpentine belt question I might be able to pick up a good deal on a new chevy performance parts serpentine belt system, complete- new, never used, but I am wondering if it will bolt up to my old 1970 350 motor? any issues I might run into? new performance part # 12497697 complete serpentine drive w/o AC __________________ 1970 K20, 350--- SOLD 05 silverado extended cab short box- duramax Jeep wrangler unlimited

11-12-2007, 10:57 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: serpentine belt question You'll need a reverse rotation water pump, which will stick your fan out a little further. IIRC, a 2 wheel drive fan shroud will be far enough forward that you can place the fan correctly in/out of it.

11-12-2007, 11:02 PM	#3
Ace in the hole Registered User Join Date: Apr 2007 Location: Kalamazoo, Michigan, USA Posts: 538	Re: serpentine belt question thanks for the info. I'll be using an electric fan so that should not matter to me but good to know. the new "serpentine drive" listed above comes with: new reverse water pump new alternater new power steering pump a/c delete pully mounting brackets, drive pulleys, hardware & tensioner & belt __________________ 1970 K20, 350--- SOLD 05 silverado extended cab short box- duramax Jeep wrangler unlimited Last edited by Ace in the hole; 11-12-2007 at 11:03 PM.

11-13-2007, 06:12 AM	#4
Ace in the hole Registered User Join Date: Apr 2007 Location: Kalamazoo, Michigan, USA Posts: 538	Re: serpentine belt question anybody know if this will bolt right up or if there are any issues? __________________ 1970 K20, 350--- SOLD 05 silverado extended cab short box- duramax Jeep wrangler unlimited

11-13-2007, 11:31 AM	#5
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,549	Re: serpentine belt question If the kit is complete there should not be any issues. Got one for my 69 GMC--had everything I needed and more.

11-13-2007, 02:23 PM	#6
Ace in the hole Registered User Join Date: Apr 2007 Location: Kalamazoo, Michigan, USA Posts: 538	Re: serpentine belt question cool, thanks __________________ 1970 K20, 350--- SOLD 05 silverado extended cab short box- duramax Jeep wrangler unlimited

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.