Parts in South Central KY- 42141

[Blue_71]

all parts are plus shipping. if you see something you want, by all means, make an offer. im easy to get along with and have no clue what this stuff is worth

• 4 aluminum slot wheels, 15x7, 5X5.5 bolt pattern (ford, dodge, jeep) thought they were chevy when i bought them. while polishing one, i flipped it over and saw the 5x5.5 stamping $110 as is, $150 if i polish the other 3. tires are going to be removed before sale
• 250 6 cyl exh/intake manifold, was on a 69 chevy swb- $25
• 250 6 cyl HEI, with cap and rotor,coil cover but no coil, $35
• 882 heads, no steam holes, need rebuilt, $20 for both
• 5 lug axle shafts, $50 for both
• long water pump with altenator brackets, and pulleys $50
• aftermarket security system, dont really know how to wire it in, was installed on an '02 blazer. comes with LED, horn, and key fob. $30 LED wires have been cut but i think you could put them back together?
• 2 LT1 distributors, unknown condition, got them in a lot of parts i acquired. $10 each
• hood hinges, all appear good, i know i have at least 2 sets, $10 each
• stock 327 pistons with rods, i was supposed to get the whole short block and the (local) guy vanished after delivering the pistons $30

[Blue_71]

more pictures

[CJ5 Convert]

I wish I was closer I might want those wheels. I wonder what shippong would be on those.

[BCOWANWHEELS]

i,d go 100.00 for the wheels polished if theres no damage to tbob

[Blue_71]

pm coming to both of you

[Blue_71]

ttt

[Blue_71]

ttt, got the tires off the wheels today!

[Blue_71]

ttt, prices to high or just no one needs this stuff?
CJ- i finally got the camera back tonight so ill get the requested pics tomarow afternoon

[CJ5 Convert]

Blue those wheels aren't the right ones. I finally got my dad to email me the pics they are very close but not the right ones. I was trying to pick another set of wheels to match my original ones on my '75 CJ. I think those are jeep rims by the way. It's the offset on the front that's different. Here is what I need. Sorry I just don't have a use for them.





Thanks Jason.

[69ShortStep]

Do you still have the 250 6 cyl exh/intake manifold? If so could you supply some pics and what shipping would be to 43112.

Thanks