Anyone remember "Project Copperhead" from Trucks.....

[Slammed70]

I vaguely remember how he shaved the door handles, 'gate, and I think the sidemarkers too. And he mentioned something about someone making filler panels to weld in to cover them up. Anyone remember who makes those little filler panels, or another company that does?

Thanks,
Mitch-

[ChevLoRay]

Seems like there's a member who has them. I'm thinking efabman, if that is the right name, had the piece to cover the fuel tank opening and the marker light openings. I reserve the right to be wrong.

[timzrides]

go into ebay and type a year from these trucks, scroll down and there is some company selling them.

[Already Gone]

You can get what you need from Ebayer seller "Infanti72".. I bought the round plug that goes over the gas tank filler hole in the cab from him and it is excellent quality and was only 15.00. He's has lots of positive feedbacks and is in in B.C Canada..

[CHYNSPR]

Infanti is the guy! He is a board member.

www.infantirides.com

[weasel29gm]

Make your own and save !!!!!

[dastuck]

I was looking at the patches on ebay also. I want to fill the gas neck hole, side markers, and stake pockets. I just wasnt sure on the quality.

[byrd]

I used just about every panel he makes and they all have been very nice. The gas filler patch is really perfect, but I did have to work on the firewall patches a little before they would fit. They saved me a bunch on time templating and making all the pieces and it is definately worth the $$$. Just my .02

[willis0107]

Go to home depot buy some sheet steel and make them your self. All the patch panels for side marker lights gas tank doors (on the bed) and the filler neck will cost you 10.00

[sick69]

I believe board member "glock35psi" makes and sells then aswell



Frank

[C10-Driver]

I also used Infanti's filler panels. For about $60 you can buy the panels to fill basically every hole in the truck... They are well worth the money IMO especially if you plan on paying a bodyman to make them. If you are making them yourself, you might pay an extra 40 or 50 bucks but you will save yourself a bunch of time and frustration.

[70GMCer]

Here.....

http://motors.search.ebay.com/_W0QQsassZinfanti72

[TravisH]

Originally Posted by C10-Driver

I also used Infanti's filler panels. For about $60 you can buy the panels to fill basically every hole in the truck... They are well worth the money IMO especially if you plan on paying a bodyman to make them. If you are making them yourself, you might pay an extra 40 or 50 bucks but you will save yourself a bunch of time and frustration.

I made all my panels and they aren't difficult. For me it was a question of I could take an hour, make my plates out of scrap and keep working on my truck, or I could pay someone and then sit and wait for them to come in the mail.

[C10-Driver]

Originally Posted by TravisH

I made all my panels and they aren't difficult. For me it was a question of I could take an hour, make my plates out of scrap and keep working on my truck, or I could pay someone and then sit and wait for them to come in the mail.

Everyone is going to have their own view on this. For myself, it was a lot easier to order the panels. I knew I was going to be shaving most of holes on the truck so I ordered the fillers long in advance... In fact, they were sitting around waiting for me to be ready for them. On top of that, I didn't do much of the sheet metal work because I don't have the tools (or the skill for that matter) to do it. For me, it was either pay for the panels or pay my bodyman to make them... I think I got off cheaply.

[barthmonster]

On TRUCKS also, was a Bronco named 'Crazy Horse'. It was a nice Purple Color, anyone know what exact color that was?? House of Kolor??

[bowtieboy93]

if you go to staceydavid.com it shows the whole build up (as well as paint color codes) and all of the stuff start to finish

[barthmonster]

I was at that site earlier, Isn't it a pay-site???

[1LoC10]

its been a few years sense i seen it, but I think the company was something like Tuckers or something

[circuit_doc]

I just purchased several filler items from Infanti72 on Ebay. The price was good and the panels were good quality. The shipping comes from Canada so it will take a few extra days to get the items.

[barthmonster]

That part of the site isn't a pay-area. Thanks!! The purple is (as I suspected) HOK Passion Pearl. I've seen it several times, it seemes to look different, maybe over lighter or darker bases. I'm planning on putting it over a black sealer for a darker version...

[Infanti]

Thanks guys for the positive feedback. Mitch if there is anything you feel we can help you with just PM me or go to our web site we manufacture those parts you are looking for. www.infantirides.com
Thanks ,Gerry

[Slammed70]

Originally Posted by Infanti

Thanks guys for the positive feedback. Mitch if there is anything you feel we can help you with just PM me or go to our web site we manufacture those parts you are looking for. www.infantirides.com
Thanks ,Gerry

Alrighty, my trucks currently in pieces right now, all funds are being directed towards engine/drivetrain because I need something to drive. After thats done Im gonna move towards the body, and I will definitly be hitting you up.

Also, I got your website added to my favorites from who ever posted it earlier.