![]() |
![]() |
#1 |
Just like to part out trucks!!
Join Date: Nov 2001
Location: Meriden, Ks-North of Topeka 10 miles
Posts: 27,396
|
vin # on frame
OK, got a problem!!! I scraped the frame above PS box and then wire brushed it. There is NO vin number stamped in the frame. I've never seen this before???? I got 3 other trucks here scraped them and found vins. Anybody ever heard of this. Its on a 67 GMC. Thanks Randy
__________________
67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Dec 2004
Location: Southern Pines NC
Posts: 3,853
|
Re: vin # on frame
I found mine, 67 swb 4x4, under the cab on the drivers side.
|
![]() |
![]() |
![]() |
#3 |
Just like to part out trucks!!
Join Date: Nov 2001
Location: Meriden, Ks-North of Topeka 10 miles
Posts: 27,396
|
Re: vin # on frame
Steve, I was thinking about that one but I'm going to get inspection on truck and you can't see that one with cab attached. Thanks Randy
__________________
67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" |
![]() |
![]() |
![]() |
#4 |
Roadtrip!
![]() Join Date: Feb 2003
Location: Grand Rapids MN
Posts: 13,737
|
Re: vin # on frame
I agree with steve. i think the earlier ones were under the cab, drivers side. Eric
__________________
67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Apr 2007
Location: Freedom CA
Posts: 488
|
Re: vin # on frame
I got one with nothing by the PS box too, guess its time to get out the wire brush and mirror. I have seen one other without the VIN stamp, and it was also old ...67 or 68.
__________________
68 Chevrolet k20 Longbed 350 SM465/205, Dana 44, 14bolt, Power steering, Power Disk Brakes, 35" BFGs. 84 Chevrolet Suburban K20 6.2 Banks turbo TH400/NP208 Now with G80 68 GMC C20 Parts? Truck And a few cars ![]() |
![]() |
![]() |
![]() |
#6 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: vin # on frame
I've never seen it myself, but I've been told the 67s didn't have it on the front part of the frame.
Isn't it the inspectors problem to locate it? |
![]() |
![]() |
![]() |
#7 |
Overdrive club
Join Date: Sep 2007
Location: apache junction, arizona
Posts: 819
|
Re: vin # on frame
I had to have my model a pickup inspected when i bought it,the vin is under the cab.I had to lift the cab for them to verify it,that sucked big time!!!!!!!!
![]() ![]() ![]()
__________________
1971 c-10 1951 3100 chevy 1970 chevy c-30 Sold! |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Jan 2001
Location: Lincoln, Nebraska
Posts: 2,145
|
Re: vin # on frame
Your in the right place as it should be about dead center of the engine on that drivers side rail. And the second one is just in front of the rear cab mount maybe 6 inches. Now I have seen some trucks without any stamped serial numbers and when I was in the body and frame business we changed out complete frames with new GM frames ordered in right from the GM dealer with of course no frame numbers. Mark
__________________
'66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed" |
![]() |
![]() |
![]() |
#9 |
Just like to part out trucks!!
Join Date: Nov 2001
Location: Meriden, Ks-North of Topeka 10 miles
Posts: 27,396
|
Re: vin # on frame
I got 2 67's here, but they are chevy's and they both have them by the ps box on top rail. Its real strange. I'm just worried about inspection guy, they are supposed to verify 3 places in Ks, title, vin plate, frame or glove box door spid label. It doesn't have a spid label on it. I scraped off a 70 GMC 4x4 I got and its where its supposed to be. I guess I'll haul it over there and hope for the best. I'm not unbolting the cab until they make me. Thanks guys, Randy
__________________
67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" |
![]() |
![]() |
![]() |
#10 |
Senior Member
Join Date: Dec 2004
Location: Southern Pines NC
Posts: 3,853
|
Re: vin # on frame
good luck, here we don't have to have them inspected.
|
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Mar 2002
Location: woodstock, alabama, usa
Posts: 938
|
Re: vin # on frame
check on the right frame rail, about center of the left door. i know that mine is a 71 model, but it has the vin next to the steering box, on top of the frame around the drivers door area, and on the passenger side on the side of the frame. could that be where it is sometimes (but only on some trucks maybe?) i'll take a measurement and be right back.
__________________
i survived cancer and kidney stones, but my kids are killing me. |
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Mar 2002
Location: woodstock, alabama, usa
Posts: 938
|
Re: vin # on frame
back again, ok, about six inches behind the right front cab mount bracket, you will see a 5/8" or there abouts hole. the vin may be stamped into the frame below that hole.
it may or may not be there, but on mine it is. good luck to you, and let us know if you find it. Tony
__________________
i survived cancer and kidney stones, but my kids are killing me. |
![]() |
![]() |
![]() |
#13 |
Just like to part out trucks!!
Join Date: Nov 2001
Location: Meriden, Ks-North of Topeka 10 miles
Posts: 27,396
|
Re: vin # on frame
Steve, Its the only way I can get a title for it is to inspect it
Tony, I've seen them on the top side of frame under cab, are you saying on the bottom side Thanks Randy
__________________
67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 11-29-2007 at 11:52 PM. |
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Mar 2002
Location: woodstock, alabama, usa
Posts: 938
|
Re: vin # on frame
Randy no , i am saying look on the side of the frame rail. on the out side. get down real low beside the truck, not under it,on the passenger side. and look at the front cab mount bracket that is welded to the frame. then look 6 inches further back toward the rear of the truck. you should see a hole about 5/8" in diameter. then go strait down about 2 or 3 inches. you should be looking at it. sorry for the dumb explantion i aint good at directions. lol !!
__________________
i survived cancer and kidney stones, but my kids are killing me. |
![]() |
![]() |
![]() |
#15 |
Just like to part out trucks!!
Join Date: Nov 2001
Location: Meriden, Ks-North of Topeka 10 miles
Posts: 27,396
|
Re: vin # on frame
Oh it wasn't you Tony, I was just trying to find out for sure, it may be the weekeknd before I can get to it, but I will. Thanks Randy
__________________
67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" |
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Mar 2002
Location: woodstock, alabama, usa
Posts: 938
|
Re: vin # on frame
let see if this works
__________________
i survived cancer and kidney stones, but my kids are killing me. |
![]() |
![]() |
![]() |
#17 |
Just like to part out trucks!!
Join Date: Nov 2001
Location: Meriden, Ks-North of Topeka 10 miles
Posts: 27,396
|
Re: vin # on frame
Tony, I found some numbers there but none of them look like vin numbers. but there are some numbers there. Thanks for the idea. I'm not sure what these numbers are. Randy
__________________
67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" |
![]() |
![]() |
![]() |
#18 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: vin # on frame
i know the part number is in that general location of my longhorn frame. I googled the number and it came back as one ton frame part number for a 67 - 72 chevy truck frame... or something like that. It's been a few years.
|
![]() |
![]() |
![]() |
#19 |
Senior Member
![]() Join Date: May 2003
Location: Sandown, NH
Posts: 2,820
|
Re: vin # on frame
I also have heard people say that 67-68 GMC's didn't have the vin#'s stamped on the frame.
Gary
__________________
Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859 |
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Apr 2007
Location: Freedom CA
Posts: 488
|
Re: vin # on frame
Bump for more info....
I have on a good coating of 30 year vintage frame dust(from by the cab mount), and still no numbers. is there any way to identify a replacement frame as such?
__________________
68 Chevrolet k20 Longbed 350 SM465/205, Dana 44, 14bolt, Power steering, Power Disk Brakes, 35" BFGs. 84 Chevrolet Suburban K20 6.2 Banks turbo TH400/NP208 Now with G80 68 GMC C20 Parts? Truck And a few cars ![]() |
![]() |
![]() |
![]() |
#21 |
Senior Member
Join Date: Mar 2007
Location: VANCOUVER ISLAND, B.C., Canada
Posts: 1,602
|
Re: vin # on frame
Other trucks/cars had this same issue. With my 1960 Corvette the Vin.# is located on the frame, drivers side just ahead of the drivers seat. When you pull the carpet back there is a black rubber plug about 2' in circumference which allows one to pull it out and with a light you'll be able to locate the Vin.#.
This might be the resolve to your problem to drill out 1 maybe 2 holes and plug them afterwards as this would allow access to view the Vin.#. Sure beats lifting the cab .... esll. ![]()
__________________
Tomorrow is for doing today's stuff. ![]() ************************************* This truck has just the right amount of energy for me! ![]() Author: Warren Lake .... (member) Last edited by EAST SIDE LOW LIFE; 12-07-2007 at 02:00 AM. |
![]() |
![]() |
![]() |
#22 |
Registered User
Join Date: Aug 2007
Location: pittsburgh pa
Posts: 1,970
|
Re: vin # on frame
I have a 67 bare frame I am builing right now and there is a set of numbers on the top of left frame rail between the engine and trans crossmembers... Didnt check to see if it is the VIN because it doesnt matter in PA.... Most likely covered by the cab I would think....
__________________
68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile Last edited by c10addict; 12-07-2007 at 10:05 AM. |
![]() |
![]() |
![]() |
#23 |
Registered User
Join Date: Feb 2000
Location: Center City, MN, USA
Posts: 3,254
|
Re: vin # on frame
Its a partial VIN on the frame rail. If I remember correctly it was "J" for Janesville and the sequence number. Not much else.
Obviously the plant and sequence number should match the VIN on the B pillar.
__________________
'70 cab, '71 chassis, 383, TH350, NP205. '71 Malibu convertible '72 Malibu hard top Center City, MN |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|