Torque specs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

t3cochise · 01-11-2003, 06:38 PM

I just got a chrome rearend cover today and was wondering if anyone knows what to torque the bolts to when it is replaced. Thanks Dan

Fred T · 01-11-2003, 08:21 PM

23 ft-lb for the stock 1/2 ton rear end.

t3cochise · 01-11-2003, 09:07 PM

Thanks for the info. Is there a site or book that has the torque specs of the 67-72 . Thanks again Dan

01-11-2003, 06:38 PM	#1
t3cochise Registered User Join Date: Sep 2001 Location: N. California Posts: 85	Torque specs I just got a chrome rearend cover today and was wondering if anyone knows what to torque the bolts to when it is replaced. Thanks Dan http://community.webshots.com/user/dansrides __________________ 1972 2wd Jimmy 1967 Camaro 2000 Tahoe Limited 1998 Tahoe 2 door 2 wd

01-11-2003, 08:21 PM	#2
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	23 ft-lb for the stock 1/2 ton rear end. __________________ Fred There is no such thing as too much cam...just not enough engine.

01-11-2003, 09:07 PM	#3
t3cochise Registered User Join Date: Sep 2001 Location: N. California Posts: 85	Thanks Thanks for the info. Is there a site or book that has the torque specs of the 67-72 . Thanks again Dan __________________ 1972 2wd Jimmy 1967 Camaro 2000 Tahoe Limited 1998 Tahoe 2 door 2 wd

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.