Pictures needed....

[Hart_Rod]

I need some pictures of the rear brake line routing and connections for 3/4 T truck or suburban. Thanks in advance.

[Longhorn Man]

you talking along the frame, or off the master... or all of it? Also, what year you interested in here?

[Hart_Rod]

Where the hard line connects to the rubber line that goes to the rear axle.

[uncle]

What model frame is it? The 72's usually mount in a different location.

[Hart_Rod]

Originally Posted by uncle

What model frame is it? The 72's usually mount in a different location.

Whatever year of suburban frame you sold me, .

R

[uncle]

Should be pretty close to a 1/2 ton setup other than the different style rear ends. Here is a Dana and an Eaton.

[uncle]

Few more.

[Hart_Rod]

Cool. 1/2 T hard line ends on the frame just prior to the rear axle.

[uncle]

Maybe on a 71,but these were both 72's. That's the main difference. The 72 line ran over and came out right above the chunk.

[Hart_Rod]

Would you happen to have the bracket that they union block and the rear rubber hose bolt to? Thanks,

[uncle]

Are you talking about the one in the pics?

[Hart_Rod]

Originally Posted by uncle

Are you talking about the one in the pics?

this one

[uncle]

That's on an Eaton rear. What are you using? There may be a difference in the line sizes. I'm sure I have one around here somewhere.

[Hart_Rod]

I have a 12 bolt. All I need is the bracket that bolts to the rearend, not the rubber hose.

[uncle]

I'll try to get my hands on one Monday.

[uncle]

Bump.