what posi to buy - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cstm68 · 01-05-2008, 07:27 AM

i have an extra 12 bolt rear end out of my 68 parts truck that i plan on puting the 5 lug convertion axels in it. (i think thaey are the same spline as the 6 lug axels) does any one know what posi i would use with this ?

ChevyDude · 01-05-2008, 08:02 AM

Eaton-19556-010

series 4 : For 3.73 gears or higher. Axels are 30 spline

jkade · 01-05-2008, 08:09 AM

That is what is in my 12 bolt and it works great.

cstm68 · 01-05-2008, 08:51 AM

is this it ? does it just bolt right in ?

http://store.summitracing.com/partde...5&autoview=sku

larry may · 01-05-2008, 10:39 AM

Need the carrier bearings, also may need a shim kit to get the back lash at a close to correct setting . Then will need some posi lube. along with a quart or two of synthetic or approved 80/90 . There may be some instructionswith the purchase. Will need to move the ring gear from old to new carrier. Have fun........

ChevyDude · 01-05-2008, 06:55 PM

Yes that's it.
http://store.summitracing.com/partde...5&autoview=sku

I like Motive gears so I went with #MGR-GM12-373 (ring &pinion) and #MGR-R12RSKT (bearings/install kit) and 5 Lug Axels from Summit #SAG-PA5855

01-05-2008, 07:27 AM	#1
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	what posi to buy i have an extra 12 bolt rear end out of my 68 parts truck that i plan on puting the 5 lug convertion axels in it. (i think thaey are the same spline as the 6 lug axels) does any one know what posi i would use with this ? __________________ 68 swb fleet bagged on 20's 327 with 4 speed http://67-72chevytrucks.com/vboard/s...d.php?t=223308 2014 Chevy 2500hd duramax CCLB

01-05-2008, 08:02 AM	#2
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: what posi to buy Eaton-19556-010 series 4 : For 3.73 gears or higher. Axels are 30 spline __________________ Alex 1971 Lil' Red 350 SBC 700R4

01-05-2008, 08:09 AM	#3
jkade Senior Member Join Date: Nov 2005 Location: AL Posts: 2,517	Re: what posi to buy That is what is in my 12 bolt and it works great.

01-05-2008, 08:51 AM	#4
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	Re: what posi to buy is this it ? does it just bolt right in ? http://store.summitracing.com/partde...5&autoview=sku __________________ 68 swb fleet bagged on 20's 327 with 4 speed http://67-72chevytrucks.com/vboard/s...d.php?t=223308 2014 Chevy 2500hd duramax CCLB

01-05-2008, 10:39 AM	#5
larry may Senior Member Join Date: Jul 2005 Location: MISSOURI Posts: 3,256	Re: what posi to buy Need the carrier bearings, also may need a shim kit to get the back lash at a close to correct setting . Then will need some posi lube. along with a quart or two of synthetic or approved 80/90 . There may be some instructionswith the purchase. Will need to move the ring gear from old to new carrier. Have fun........ __________________ The biggest problem people have, is other people Thou shalt be cool and not hassle Be a site supporter. The heart of the wise inclines to the right, but the heart of the fool inclines to the left." Ecclesiastes 10:2

01-05-2008, 06:55 PM	#6
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: what posi to buy Yes that's it. http://store.summitracing.com/partde...5&autoview=sku I like Motive gears so I went with #MGR-GM12-373 (ring &pinion) and #MGR-R12RSKT (bearings/install kit) and 5 Lug Axels from Summit #SAG-PA5855 __________________ Alex 1971 Lil' Red 350 SBC 700R4 Last edited by ChevyDude; 01-05-2008 at 06:55 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.