my camo paint job (no laughing) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bad_turbo · 01-10-2008, 10:02 PM

had a few extra cans of spray paint laying around. Thought I would put them to work. Hate wasting stuff.

Bishops Trucks · 01-10-2008, 10:32 PM

Sorry! I hate to waiste things to.

68caliRat · 01-10-2008, 10:54 PM

Must be a good job, I don't see anything but bushes....

**El Jay** · 01-10-2008, 11:38 PM

Quote:

Originally Posted by 68caliRat

Must be a good job, I don't see anything but bushes....

G.W. & Laura?

Andy4639 · 01-11-2008, 02:17 AM

It must be working. All I see is a spare tire cover.

toms68cst · 01-11-2008, 03:48 AM

Looks like one of those WW-I paint schemes you'd see on a ship to confuse U-Boats

hyarbour · 01-11-2008, 05:28 AM

I didn't laugh, but I just spit coffee all over the monitor.

**KSCHEVYUP** · 01-11-2008, 05:31 AM

Isn't that what they call Urban Camo?

Sport/Truck · 01-11-2008, 05:45 AM

Think this should be posted in the theft deterrent thread! You shouldn’t have any trouble spotting it in parking lots either.

s/t

PanelDeland · 01-11-2008, 06:30 AM

Ready to hunt!!!

67ChevyRedneck · 01-11-2008, 07:06 AM

Quote:

my camo paint job (no laughing)

...oh, wait, sorry

*Couldn't resist. I'd drive it.

Orange · 01-11-2008, 08:15 AM

Oh, you knew that was going to get some laughs.

You have been a member for too long.

DLB

bad_turbo · 01-11-2008, 09:42 AM

Hey, its the best I could do without a pattern to copy. Not to mention the weather sucked, but it does look better than it did before i turned the spray cans loose.

Ol'Rover · 01-11-2008, 10:14 AM

shoulda did didgial camo! that woulda looked so sick!

01-10-2008, 10:02 PM	#1
bad_turbo turbo enthusiast Join Date: Jan 2004 Location: carmichael, ca. Posts: 1,826	my camo paint job (no laughing) had a few extra cans of spray paint laying around. Thought I would put them to work. Hate wasting stuff. Attached Images __________________ "But daddy, I didn't hit them all with a stick"...what my 6 year old tells me when I pick him up from school early for fighting "

01-10-2008, 10:32 PM	#2
Bishops Trucks KEEP ON TRUCKIN' Join Date: Jun 2005 Location: Sterling, Va. Posts: 5,730	Re: my camo paint job (no laughing) Sorry! I hate to waiste things to. __________________ JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10 Father/Son Project http://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER"

01-10-2008, 10:54 PM	#3
68caliRat Need a bigger hammer.. Join Date: Feb 2007 Location: Escondido,CA. Posts: 280	Re: my camo paint job (no laughing) Must be a good job, I don't see anything but bushes.... __________________ 1968 GMC 3/4 LWB fleetside Custom Camper 2018 Silverado High Country 2500HD Duramax 4X4

01-11-2008, 02:17 AM	#5
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: my camo paint job (no laughing) It must be working. All I see is a spare tire cover. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

01-11-2008, 03:48 AM	#6
toms68cst Registered User Join Date: Jun 2000 Location: Bismarck, ND Posts: 4,300	Re: my camo paint job (no laughing) Looks like one of those WW-I paint schemes you'd see on a ship to confuse U-Boats __________________ Unrestored 68 C-10 CST. Original 327. 4-Speed CH465. 50k or so miles. TREASURER, Drum Brake Club.

01-11-2008, 05:28 AM	#7
hyarbour Registered User Join Date: Jan 2007 Location: Fairview, ks Posts: 203	Re: my camo paint job (no laughing) I didn't laugh, but I just spit coffee all over the monitor.

01-11-2008, 05:31 AM	#8
KSCHEVYUP Senior Member Join Date: Nov 2003 Location: NEAR MARYSVILLE,KANSAS 66508 Posts: 471	Re: my camo paint job (no laughing) Isn't that what they call Urban Camo? __________________ 1972 C30 Cheyenne Super 1971 C10 (Parts truck)

01-11-2008, 05:45 AM	#9
Sport/Truck Sierra Grande Club Join Date: Jan 2007 Location: New Mexico USA Posts: 2,433	Re: my camo paint job (no laughing) Think this should be posted in the theft deterrent thread! You shouldn’t have any trouble spotting it in parking lots either. s/t __________________ 1971 GMC Sierra Grande, 1/2 ton short wide, original 4 bolt 010 020 block & heads. (matching #'s). 383 stroker, SMI q jet 750 cfm, Lunati Voodoo 60102 cam, Scorpion roller rockers, Spin Tech pro street mufflers with X pipe. Last edited by Sport/Truck; 01-11-2008 at 05:46 AM.

01-11-2008, 06:30 AM	#10
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: my camo paint job (no laughing) Ready to hunt!!! __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

01-11-2008, 08:15 AM	#12
Orange Licensed to Thrill! Join Date: Apr 2006 Location: Northwest, GA Posts: 1,673	Re: my camo paint job (no laughing) Oh, you knew that was going to get some laughs. You have been a member for too long. DLB __________________ 1971 GMC.Lowered. Overdrive. Orange. Krue's excellent FAQ Index.

01-11-2008, 09:42 AM	#13
bad_turbo turbo enthusiast Join Date: Jan 2004 Location: carmichael, ca. Posts: 1,826	Re: my camo paint job (no laughing) Hey, its the best I could do without a pattern to copy. Not to mention the weather sucked, but it does look better than it did before i turned the spray cans loose. __________________ "But daddy, I didn't hit them all with a stick"...what my 6 year old tells me when I pick him up from school early for fighting "

01-11-2008, 10:14 AM	#14
Ol'Rover Project: years too late. Join Date: Dec 2007 Location: Almonte,ON,Canada Posts: 550	Re: my camo paint job (no laughing) shoulda did didgial camo! that woulda looked so sick! __________________ 1971 C10 Stepper LSX 5.3/4L60E 3.73 12bolt posi. Father Son Project. In Memory of Bruce C. Shorten. Rest easy Dad. Ill take it fryom here.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.