Do I Have the Right Ram Horns? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

stepn67 · 01-12-2008, 08:22 AM

I recently bought a set of ram horns for my 67 1/2 ton 2wd. One is straight dump and the other is angled back. Will they work on my 67 with V8 in the V8 position. This is not a restoration so I just need them to work, but I've read that these may only work on 4wd.

camaroman · 01-12-2008, 01:00 PM

I have a 69 and a 71 and both have that style of manifold. They should work just fine.

Andy4639 · 01-12-2008, 01:56 PM

I'm not positive on these but I think the straight down one want work. They need to be angled. I think, not sure.

skokie · 01-12-2008, 01:59 PM

On my 68 both are angled.

bucky_21_7 · 01-12-2008, 02:38 PM

the strait one will work just fine just more work to build an exsaust for thorse than the kick back ones

01-12-2008, 08:22 AM	#1
stepn67 Junior Member Join Date: Dec 2002 Location: Tucson, AZ Posts: 140	Do I Have the Right Ram Horns? I recently bought a set of ram horns for my 67 1/2 ton 2wd. One is straight dump and the other is angled back. Will they work on my 67 with V8 in the V8 position. This is not a restoration so I just need them to work, but I've read that these may only work on 4wd.

01-12-2008, 01:00 PM	#2
camaroman Registered User Join Date: Jul 2007 Location: NC Posts: 12	Re: Do I Have the Right Ram Horns? I have a 69 and a 71 and both have that style of manifold. They should work just fine. __________________ 71 c-10 ,69 c-10 and 94Z28 400 WHP

01-12-2008, 01:56 PM	#3
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Do I Have the Right Ram Horns? I'm not positive on these but I think the straight down one want work. They need to be angled. I think, not sure. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

01-12-2008, 01:59 PM	#4
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,342	Re: Do I Have the Right Ram Horns? On my 68 both are angled. __________________ RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234

01-12-2008, 02:38 PM	#5
bucky_21_7 Registered User Join Date: May 2007 Location: Winnipeg Manitoba Posts: 59	Re: Do I Have the Right Ram Horns? the strait one will work just fine just more work to build an exsaust for thorse than the kick back ones

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.