![]() |
![]() |
#1 |
Registered User
Join Date: Sep 2006
Location: ordway, co
Posts: 16
|
guage ?
ok im thinking of upgrading to all new guages, now i have seen alot of them on here and was wondering if you can buy new guages that will work with the stock wiring, or do you have to rewire all the new guages. its no big deal if i do just want to know. thanks.
|
![]() |
![]() |
![]() |
#2 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: guage ?
custom wire job.
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Sep 2006
Location: ordway, co
Posts: 16
|
Re: guage ?
ok now about the fuel guage, will they wire up to are sensor or do i have to get a new one of those too. I thought i read something about them being a differnt than the newere ones or some thing. electrical is not my thing, i learning about it right now in my auto tech school.
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jan 2006
Location: Kaufman, Tx
Posts: 827
|
Re: guage ?
I wired my gauge to the sending unit in my blazer tank. You'll need a 0-90ohm fuel gauge (available in every line of aftermarket gauges). Hook 12v to one side of the gauge, one side of the sender goes to the other side of the gauge, and the other side of the sender goes to ground. And it should work. A fuse in there somewhere is a good idea too.LOL
Jay Jay
__________________
You only need two tools in life - WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape. If a hammer doesn't fix it, you have an electrical problem! Slot Cars, 1:24 Scale, 100MPH@100,000RPM, fastest things on wheels! ![]() Last edited by Psycho71; 01-13-2008 at 07:30 PM. |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|