|
01-20-2008, 08:57 AM
|
#1 | |
|
FarmBoy.
Join Date: Feb 2005
Location: Rhinelander, WI
Posts: 1,103
|
Radator interchange?
hey all.
i'm afraid my rad might be leaking, where i attempted to repair it by soldering. i don't know for sure, but it looked a bit damp when i started to fill it up today. so, in a worst case scenario, and the rad is leaking, and it happens that i can't solder it up some more... could a later model radiator work? reason being, is that we have a '82 C-10 out back, sitting on a '76 frame, that my Dad put together in the early 90's. the radiator is good in that. if my calculations are correct, the size is *pretty* close to being the same.. so. anyone have an idea on this>? opinion? suggestion? anything would be appreciated. thanks! -Sam.
__________________
1969 GMC C1500. long fleet. 307. 3 on the tree. 3.07 gears. Oliver green. Bent and bruised. Daily Driver. Quote:
http://67-72chevytrucks.com/vboard/s...d.php?t=242993 |
|
|
|
|
01-20-2008, 09:53 AM
|
#2 |
|
State of Confusion!
  
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 47,468
|
Re: Radator interchange?
I think they might be close, but I remember something about the lower neck being angled differently that makes it a pain.
Sorry bud, but that's all my old mind can conjure up. 
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
|
|
|
|
01-20-2008, 09:56 AM
|
#3 | |
|
FarmBoy.
Join Date: Feb 2005
Location: Rhinelander, WI
Posts: 1,103
|
Re: Radator interchange?
no problem Bill.
 that's a pretty good answer for me. maybe it's my up bringing, but in times of desperation/necessity..."close enough is good enough".  .thanks again!  -Sam.
__________________
1969 GMC C1500. long fleet. 307. 3 on the tree. 3.07 gears. Oliver green. Bent and bruised. Daily Driver. Quote:
http://67-72chevytrucks.com/vboard/s...d.php?t=242993 |
|
|
|
|
|
01-20-2008, 09:59 AM
|
#4 |
|
State of Confusion!
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 47,468
|
Re: Radator interchange?
Sam try this, it takes a little fabing, but supposedly works,.
Check out how TX Fighter did it http://67-72chevytrucks.com/vboard/s...d.php?t=265118
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
|
|
|
|
01-20-2008, 10:10 AM
|
#5 | |
|
FarmBoy.
Join Date: Feb 2005
Location: Rhinelander, WI
Posts: 1,103
|
Re: Radator interchange?
excellent!
thanks Bill! -Sam.
__________________
1969 GMC C1500. long fleet. 307. 3 on the tree. 3.07 gears. Oliver green. Bent and bruised. Daily Driver. Quote:
http://67-72chevytrucks.com/vboard/s...d.php?t=242993 |
|
|
|
|
|
01-20-2008, 10:53 AM
|
#6 |
|
I am a Referee of life.
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,992
|
Re: Radator interchange?
I ran a 76 Monte Carlo radiator in a67 for several years.I "think" I used an accordian style hose.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
