Np205 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*dtlilly* · 01-16-2003, 11:26 PM

I'm finishing up the rebuild of my NP 205. Thanks to the pages from Yukon, and parts from National Drivetrain. Oh, I hope you don't need an adaptor for your 350TH to Np205. I had oil leaking from my NP 205, so I pulled it expecting only to spend $125 on new berring and seal kit. The adaptor was severely cracked around the berring on T-case side. I tried to repair it, but the crack got worse as I heated the cast iron to accept welding. A new unit was located a a chevy dealer for $345

. I should have everything back together by the end of the weekend.

01-16-2003, 11:26 PM	#1
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Rebuild I'm finishing up the rebuild of my NP 205. Thanks to the pages from Yukon, and parts from National Drivetrain. Oh, I hope you don't need an adaptor for your 350TH to Np205. I had oil leaking from my NP 205, so I pulled it expecting only to spend $125 on new berring and seal kit. The adaptor was severely cracked around the berring on T-case side. I tried to repair it, but the crack got worse as I heated the cast iron to accept welding. A new unit was located a a chevy dealer for $345 . I should have everything back together by the end of the weekend.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.