headers ?? on 70

[tnblazerk5]

what headers fit a 70 3/4 ton 350/350/205
i a few sets here already and hope a set of what i got will fit lol
i know i got a set of coated and a set noncoated hedmans 65101 <fit a 71 monty i think
i got a few others here but its cold rainin and dark out side
try to get what the others are later

[johnnywagon]

Most small block 4x4 truck headers fit from 67-81. There are some more specific ones within that range but most should fit.

The #65101 lists as for a 64-77 Chevelle/Malibu. Obviously there has to be some "car" headers that happen to fit "trucks", but NONE are cataloged that way. I dont think anyone has ever bothered to make a cross reference to show what might interchange....yet.

[JAKES 68GMC]

Get Hedman or Hooker headers if you buy some. Cheap ones will not fit good and are hard to hook up to exhaust.

[tnblazerk5]

Originally Posted by johnnywagon

Most small block 4x4 truck headers fit from 67-81. There are some more specific ones within that range but most should fit.

The #65101 lists as for a 64-77 Chevelle/Malibu. Obviously there has to be some "car" headers that happen to fit "trucks", but NONE are cataloged that way. I dont think anyone has ever bothered to make a cross reference to show what might interchange....yet.

i found another set of hedmans today , they fit a 67-72, 2 wheel truck
whats the diff in 2 wheel and 4 wheel headers ?
i also found a set of unknown headers , no name or numbers
i also got a set of block huggers

Originally Posted by JAKES 68GMC

Get Hedman or Hooker headers if you buy some. Cheap ones will not fit good and are hard to hook up to exhaust.

if non of the headers i got here will fit , i get a bunch of manifolds layin out back i will have to go though and see if any of them will work , this is a low buck throw together till spring or summer

[Blue_71]

i had a set on my k20, that i later put on the 71 C10. they fit both trucks great, other than clutch linkages