Do you need '64-'66 Chevy Truck Parts?

[CVA59]

Originally Posted by LILRED66

joe231:

All of my parts are good, used OEM parts. I do not sell reproduction or aftermarket stuff. I have acquired a great deal of inventory over the past several years and use the majority of my parts for my projects, however, I do sell a lot of used stuff, also.

Tony,
Do you have a good 64 hood?
Thanks,
Zack

[joe231]

cool, thanks Tony!
look forward to hearing from you.

[gulfcoast66]

Hey tony hows it going man im in a bind i hope you can help. I need to buy some nuts and bolts from you i need the ones for the hand brake and steering colouem and the 3 on the firewall for the colouem the 4 little ones for the plate under the dash for the colouem. I removed my steering colouem and hand brake and lost all the hardware somewhere between work and home. I hope you know what im talking about. Thanks Chris

[ron19]

Tony,

I'm also looking for the horn cap/button, whatever you call it, that goes in the center of the steering wheel. Somehow my chevy ended up with a gmc button. It's a 65 if that matters.

Thanks.

[red7218]

Hi, do you have a Hallander interchange booK. I am looking for a pair of wheel hubs that fit a 1962 (tapered roller bearings). I suspect they are the same as the years you deal in. If you have them I need um. Thanks Marshall

[LILRED66]

Originally Posted by red7218

Hi, do you have a Hallander interchange booK. I am looking for a pair of wheel hubs that fit a 1962 (tapered roller bearings). I suspect they are the same as the years you deal in. If you have them I need um. Thanks Marshall

I don't Hollander Exchange manual, so I am not able to tell you if the '60-'66 are all the same. I have a set of front hubs from a '65, that have been refinished for a frame-off restoration, but we did a disk brake conversion instead. If you know for sure they will work, they are for sale.

[BGRAFX]

I just realized that there are no back doors on a 60's suburban...I always thought they were 3doors like the 67-72 burbs. That makes them pretty inconvienant don't ya think?

[padresag]

Originally Posted by BGRAFX

I just realized that there are no back doors on a 60's suburban...I always thought they were 3doors like the 67-72 burbs. That makes them pretty inconvienant don't ya think?

why would that be? no different than owning a 2 door car
ron

[LILRED66]

Originally Posted by BGRAFX

I just realized that there are no back doors on a 60's suburban...I always thought they were 3doors like the 67-72 burbs. That makes them pretty inconvienant don't ya think?

Hey Brian. Good to hear from you. Inconvenient...not so much, since the passenger seat is a jumper. '60-'66 Chevy/GMC Suburbans only had two doors...I think the three door style started in '67...one driver side and two passenger side.

Take care and come by the shop sometime. Talk to you soon and enjoy the weekend.

[62scraper]

lilred66-
I paid you for a rear bumper and I PM'd you for a tracking number and I havent heard back. Have you sent it?

[LILRED66]

Originally Posted by 62scraper

lilred66-
I paid you for a rear bumper and I PM'd you for a tracking number and I havent heard back. Have you sent it?

Sorry for the delay in shipping parts. With the World of Wheels last weekend, ice and snow this week and getting slammed at work, I have been slow in pulling and shipping parts. I apologize for the delay. I am trying to get caught up over the next few days.

I will keep you posted on my progress and thanks for your patience.

[truckn']

hey tony do you have any A pillars 65 gmc? pics and price with shipping to 37857. thx Tom

[LILRED66]

Originally Posted by truckn'

hey tony do you have any A pillars 65 gmc? pics and price with shipping to 37857. thx Tom

Tom:

Do you need the "A" pillar at the windshield or at the door bottom? Let me know and I will see what I can come up with. Also, if you need the bottom, they are now available from www.classicparts.com for under $40.00.

[Brianflores]

Hi, i would like to know if you had a front bumper for my 66?

[64Magoo]

To start off with, how much would ONE hood spring be to 93301?

[LILRED66]

Originally Posted by 64Magoo

To start off with, how much would ONE hood spring be to 93301?

One hood spring, via USPS, Priority Mail is $10.00 for shipping, but if you need two hood springs and two hood hinges, I would ship, via UPS, Ground. I estimate the shipping to be $25.00, plus the cost of the hinges and springs. Please let me know if I can help you with these parts or other 4-5-6 Chevy Truck parts in the future.

[scotts62]

Do you have any good bed sides for a short stepside bed? I have the outer fenders, front cab panel and tailgate but no bed sides..
Pm me if you do, dont worry about checkng shipping ill make the drive if you have them.

Thanks, Scott

[LILRED66]

Originally Posted by scotts62

Do you have any good bed sides for a short stepside bed? I have the outer fenders, front cab panel and tailgate but no bed sides..
Pm me if you do, dont worry about checkng shipping ill make the drive if you have them.

Thanks, Scott

Scott:

I have a good pair of swb fleetside bed sides...they are loose and in good, used condition. I am out of town visiting family and working until June 5th, so I will have to jump on this upon my return. Thanks for your interest and I will keep you posted.

[Volvo_Matt]

I am eventually in need of a hood and both front fenders. How much for these? Obviously since I live in Oregon shipping would be a grip, but just wanted to compare some prices. Any pics would be good!! Thanks.

[orange66fleet]

looking for a set of stock side mirrors for my 66 and also a automatic steering column for the same truck. thanks mike

[LILRED66]

Originally Posted by orange66fleet

looking for a set of stock side mirrors for my 66 and also a automatic steering column for the same truck. thanks mike

Mike:

Sorry for the delay. There are several styles and finishes of stock mirrors for the 4-5-6 Chevy trucks. What style and finish are you looking for? Let me know and I will see what I have in inventory. Thanks for the inquiry and sorry for the delay.

[LILRED66]

Originally Posted by Volvo_Matt

I am eventually in need of a hood and both front fenders. How much for these? Obviously since I live in Oregon shipping would be a grip, but just wanted to compare some prices. Any pics would be good!! Thanks.

Volvo_Matt:

Sorry for the delay. I am fresh out of a good hood and good doors. Sorry I couldn't help you. You might try a fellow on eBay from Redding, CA. He sells lots of good NOS/OEM and used 4-5-6 Chevy trucks parts, including doors and hoods. Sorry I couldn't help, but please keep me in mind for other 4-5-6 Chevy truck parts in the future.

[65chevy4x4]

Do you have a 1964-1966 chevy standard heater dash plate or a delete heater plate? Thanks

[LILRED66]

Originally Posted by 65chevy4x4

Do you have a 1964-1966 chevy standard heater dash plate or a delete heater plate? Thanks

Thanks for the inquiry. Do you need the Thrift Air dash heater plate? If so, I have a few. I do not have any dash heater delete plates or firewall heater delete plates.

Please let me know if I can help you with this part or other 4-5-6 Chevy truck parts in the future.

[65chevy4x4]

The thrift air dash heater plate will work.I have a 63 chevy firewall heater delete plates.T think they will work.