![]() |
![]() |
#1 |
mini truck racer
Join Date: Aug 2006
Location: Baytown , texas
Posts: 3,010
|
Van tilt question
What intermidiate shaft do I need for the van tilt conversion on a 67' ? It has a small spline type end to the van tilt .
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: May 2006
Location: Columbia, MO
Posts: 16
|
Re: Van tilt question
I bought a "van tilt" at a swap meet and it just bolted right up to my existing shaft. Hope this helps. I did have to compress it a little. But it just went right in after that.
|
![]() |
![]() |
![]() |
#3 |
Designated A-hole!
Join Date: Mar 2003
Location: South Mississippi
Posts: 36,450
|
Re: Van tilt question
Click the FAQ Index link in my sig for a complete write-up on what you need to do the conversion.
__________________
"If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. ![]() We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck" |
![]() |
![]() |
![]() |
#4 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: Van tilt question
you'll need to locate a 69 - 72 truck in a junk yard and when you pop the hood you'll see it. It bolts to the column, and then to the steering gear box. 67 and some 68's don't have this.
|
![]() |
![]() |
![]() |
#5 |
mini truck racer
Join Date: Aug 2006
Location: Baytown , texas
Posts: 3,010
|
Re: Van tilt question
I read through the FAQ section and wasn't able to find the info I needed . I did the inside part of the conversion to a 68' and had to sell it before I finished it . The van has 36 spline . and my original 68' shaft I believe had a D style . So 69-72 intermediate shaft is what I need ? I bought one at the swap meet this week end and it had a splined end , but was the incorrect shaft diameter . I'm Just looking for a little extra info , not a collection of incorrect shafts .
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|