anyone have pics of SWB with 20's - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ccsrcr · 01-24-2003, 08:33 PM

I am thinking about getting 20's for my upcoming SWB project, and was wondering if anyone has them , and if you could post some pics. I want to lower it something like 5" in the rear, and 4" in the front, so also if you have any recomendations on backspacing and width of the rims would be great. Also any pro's and con's of running the 20'. This will not be a daily driver, just something to play in on the weekends.

Alexis · 01-24-2003, 09:42 PM

this should help

http://67-72chevytrucks.com/vboard/s...&highlight=20s

Crank · 01-25-2003, 12:30 AM

Yea, Thanks Alexis. That pretty much is all that is needed for this frickin' post huh?
Brandon

Alexis · 01-25-2003, 12:37 AM

i alway refrence myself to that link just to dream about putting my DUB's on my blazer someday......

ccsrcr · 01-25-2003, 12:43 AM

Thanks, I guess I should look through the archives. So anyone got an idea of backspacing and wheel width ? Also i looks like one of those trucks had the drip rail remove ? Can that be done ? It looked really clean that way !

Alexis · 01-25-2003, 12:53 AM

there are a few members that are doing this......sorry but i dont know which one's just do a search should come up with soem old threads.

Crank · 01-25-2003, 01:08 AM

I think all ones I've heard have really good luck with 4.5 inch backspacing.
Brandon

01-24-2003, 08:33 PM	#1
ccsrcr Registered User Join Date: Jan 2003 Location: Lorton,VA Posts: 201	anyone have pics of SWB with 20's I am thinking about getting 20's for my upcoming SWB project, and was wondering if anyone has them , and if you could post some pics. I want to lower it something like 5" in the rear, and 4" in the front, so also if you have any recomendations on backspacing and width of the rims would be great. Also any pro's and con's of running the 20'. This will not be a daily driver, just something to play in on the weekends.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-24-2003, 09:42 PM	#2
Alexis Member since 2000 Join Date: Dec 2000 Location: Mountain View Ca / Mexico Posts: 7,874	this should help http://67-72chevytrucks.com/vboard/s...&highlight=20s

01-25-2003, 12:30 AM	#3
Crank Registered User Join Date: Aug 2002 Location: Crittenden, KY Posts: 1,965	Yea, Thanks Alexis. That pretty much is all that is needed for this frickin' post huh? Brandon

01-25-2003, 12:37 AM	#4
Alexis Member since 2000 Join Date: Dec 2000 Location: Mountain View Ca / Mexico Posts: 7,874	i alway refrence myself to that link just to dream about putting my DUB's on my blazer someday......

01-25-2003, 12:43 AM	#5
ccsrcr Registered User Join Date: Jan 2003 Location: Lorton,VA Posts: 201	Thanks, I guess I should look through the archives. So anyone got an idea of backspacing and wheel width ? Also i looks like one of those trucks had the drip rail remove ? Can that be done ? It looked really clean that way !

01-25-2003, 12:53 AM	#6
Alexis Member since 2000 Join Date: Dec 2000 Location: Mountain View Ca / Mexico Posts: 7,874	there are a few members that are doing this......sorry but i dont know which one's just do a search should come up with soem old threads.

01-25-2003, 01:08 AM	#7
Crank Registered User Join Date: Aug 2002 Location: Crittenden, KY Posts: 1,965	I think all ones I've heard have really good luck with 4.5 inch backspacing. Brandon



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.