relocating the netural safty switch - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72_chevy · 01-30-2003, 08:57 PM

i put in a new tilt colum in my 72 got it for 42 bucks so i had to take the netural safty switch off but how can i get it back on there thanks nick

1971LT1SWBPOSI373 · 01-30-2003, 10:47 PM

Need more info..... is it the tilt steering for these trucks?

72_chevy · 01-30-2003, 11:31 PM

yea tilt colum outa van 78

Hooter · 01-31-2003, 03:25 AM

if youd dont wanna go through all the hassle you could always bypass the switch but then you wouldnt have any backup lights

kaycee · 01-31-2003, 09:25 AM

It is best to do while the colum is still out test fit then mark where it should go.Make sure u have enough room to clear all obstacles I didn't move mine far enough down and it ended up hitting the brake switch so I cut another hole a little farther down u can allso put it 2 far down the colum and it will end up hitting the fire wall

I think this was the hardest part determing where to place it ,the rest was a breeze.You have to cut a hole just like it was origanally. There is a difference in the way the NSS hooks up to the colum the groove for the colum part .You need to figure out which 1 u r going to use then make it fit

01-30-2003, 08:57 PM	#1
72_chevy Registered User Join Date: Dec 2002 Location: parker Posts: 87	relocating the netural safty switch i put in a new tilt colum in my 72 got it for 42 bucks so i had to take the netural safty switch off but how can i get it back on there thanks nick

01-30-2003, 10:47 PM	#2
1971LT1SWBPOSI373 Registered User Join Date: Mar 2002 Location: Springfield, VA Posts: 460	Need more info..... is it the tilt steering for these trucks? __________________ 1971 Shortbed 350/350 w/ Posi-traction 3:73's 1996 Chevy Silverado TJ in Springfield, Virginia Likes old Chevy trucks Drinks Miller MGD

01-30-2003, 11:31 PM	#3
72_chevy Registered User Join Date: Dec 2002 Location: parker Posts: 87	yea tilt colum outa van 78 __________________ 1972 chevy 3/4 350/350 ps pb a hoss in the making 1967 dodge powerwagon 2ton 4 wheel drive(will climb over anythign)FOR SALE

01-31-2003, 03:25 AM	#4
Hooter My other Love Join Date: Aug 2001 Location: Castlegar B.C. Canada Posts: 4,085	if youd dont wanna go through all the hassle you could always bypass the switch but then you wouldnt have any backup lights __________________ Castlegar B.C.The great white North (Canada Eh!) Hooter_5@hotmail.com First generation Monte Carlo club pictures of my life

01-31-2003, 09:25 AM	#5
kaycee Registered User Join Date: Jan 2000 Location: Wyoming USA Posts: 2,446	N.S.S. It is best to do while the colum is still out test fit then mark where it should go.Make sure u have enough room to clear all obstacles I didn't move mine far enough down and it ended up hitting the brake switch so I cut another hole a little farther down u can allso put it 2 far down the colum and it will end up hitting the fire wall I think this was the hardest part determing where to place it ,the rest was a breeze.You have to cut a hole just like it was origanally. There is a difference in the way the NSS hooks up to the colum the groove for the colum part .You need to figure out which 1 u r going to use then make it fit __________________ 2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.