What will I have to do to get my Coy's to fit... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

AllenKarber · 05-14-2008, 02:40 AM

My polished Coy's C5 wheels are due to come in this week. I have a '64 C10,but I've converted to 5 lug discs and rear from a '71.

What all will I have to do to get them to fit?

I've heard of the center cap issue,and the valve stem possibly hitting the rotor. Anything else?

I guess this could possibly called "The Official Coys wheel problems" thread.

They're hot looking wheels though! I'm getting excited!

svgould · 05-14-2008, 04:25 AM

What size wheels did you order? My 18's fit with just a short valve stem. It was close, but they do clear.

HoupPhotography · 05-14-2008, 06:45 AM

There is great info HERE

AllenKarber · 05-15-2008, 01:15 AM

Quote:

Originally Posted by svgould

What size wheels did you order? My 18's fit with just a short valve stem. It was close, but they do clear.

17x8 and I meant hit the caliper and not the rotor.

I had seen the cap spacer thread,but it's worth looking at if anyone hasn't seen it.

Here's another thread. It looks like lots of work to me:

http://www.67-72chevytrucks.com/vboa...ht=Coys+wheels

05-14-2008, 02:40 AM	#1
AllenKarber Registered User Join Date: Apr 2008 Location: Arkadelphia,Arkansas Posts: 199	What will I have to do to get my Coy's to fit... My polished Coy's C5 wheels are due to come in this week. I have a '64 C10,but I've converted to 5 lug discs and rear from a '71. What all will I have to do to get them to fit? I've heard of the center cap issue,and the valve stem possibly hitting the rotor. Anything else? I guess this could possibly called "The Official Coys wheel problems" thread. They're hot looking wheels though! I'm getting excited!

05-14-2008, 04:25 AM	#2
svgould Active Member Join Date: Jul 2003 Location: Boise Idaho Posts: 296	Re: What will I have to do to get my Coy's to fit... What size wheels did you order? My 18's fit with just a short valve stem. It was close, but they do clear. __________________ 1971 SWB SOLD LT1 motor / 4l60E transmission ECE front dropped spindles with stock height springs 4" rear springs Coys Wheels 18 x 8 all the way around Hydratech hydroboost brake system

05-14-2008, 06:45 AM	#3
HoupPhotography Registered User Join Date: Feb 2008 Location: Phoenix, Az Posts: 1,204	Re: What will I have to do to get my Coy's to fit... There is great info HERE __________________ R.I.P. Scott Kalitta

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.