|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
06-03-2008, 04:42 PM
|
#1 |
|
go cyclones
Join Date: Jun 2003
Location: Ames, IA
Posts: 1,883
|
Radiator Hoses on your serp set up
All you guys/gals out there that switched over to the serp belt. How did you guys run your radiator hoses? Do I just need to go and get the ones for a newer truck? Thanks
Wes |
|
|
|
06-03-2008, 07:31 PM
|
#2 |
|
Registered User
Join Date: Apr 2000
Location: Bonne Terre, Mo
Posts: 3,005
|
Re: Radiator Hoses on your serp set up
Look around find someone with a silverado P/U with a serp setup. Pop the hood check the thermostat housing. If it points the right direction for your application go to the parts store & get that upper hose. That is the safest way to insure you have the correct application.
__________________
'69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629" |
|
|
|
|
06-03-2008, 07:33 PM
|
#3 |
|
Registered User
Join Date: Apr 2000
Location: Bonne Terre, Mo
Posts: 3,005
|
Re: Radiator Hoses on your serp set up
You may need the swivel thermostat housing before you are happy with it. Otherwise the upper hose don't like that bracket much.
__________________
'69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629" |
|
|
|
|
06-04-2008, 07:42 AM
|
#4 |
|
go cyclones
Join Date: Jun 2003
Location: Ames, IA
Posts: 1,883
|
Re: Radiator Hoses on your serp set up
Thanks, I work with a guy who has an 1990's chevy. Ill ask him if I can take a peek.
|
|
|
|
|
06-05-2008, 03:16 PM
|
#5 |
|
Registered User
Join Date: Feb 2002
Location: Vacaville, CA
Posts: 2,745
|
Re: Radiator Hoses on your serp set up
For the top I used a #7368 from NAPA. It is a stock chevy hose (I just don't know which Chevy). For the bottom I used a bendable convoluted steel hose.
__________________
 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
