uncut dash, header panel, longbox sides - The 1947 - Present Chevrolet & GMC Truck Message Board Network

p-low · 05-07-2008, 11:15 PM

dash is near perfect.....75
longbox sides only need wheel arch patches and i have them....150
long box cross rails...any of them you need 50 bucks takes what you need
beat up chevy lettered tailgate....75 bucks
69 hood ....50
couple of rusty doors, 20 bucks a piece
front 3/4 ton crosmember and suspension ....100
also other items pm me with your needs....68 and 69 trucks

oldsmobilekindofguy · 05-08-2008, 05:05 AM

do you have pics pf the dash

p-low · 05-08-2008, 07:02 AM

here ya go

p-low · 05-08-2008, 07:03 AM

i cut it off allong the top of the fire wall so that the original spotweld could be drilled and rewelded, can be cut throught the dashpad holes and rewelded...or just the section with the radio but i cut it to allow alll options...thanks let me know

Greg63 · 06-07-2008, 09:53 AM

Can you give me a picture of the crossmember? (I am not needing suspension)
Is the 1/2 ton crossmember different from the 3/4 ton crossmember?

05-07-2008, 11:15 PM	#1
p-low Registered User Join Date: Feb 2006 Location: buffalo Posts: 178	uncut dash, header panel, longbox sides dash is near perfect.....75 longbox sides only need wheel arch patches and i have them....150 long box cross rails...any of them you need 50 bucks takes what you need beat up chevy lettered tailgate....75 bucks 69 hood ....50 couple of rusty doors, 20 bucks a piece front 3/4 ton crosmember and suspension ....100 also other items pm me with your needs....68 and 69 trucks

05-08-2008, 05:05 AM	#2
oldsmobilekindofguy Registered User Join Date: Aug 2007 Location: Stratford,SD Posts: 296	Re: uncut dash, header panel, longbox sides do you have pics pf the dash __________________ 1967 c-10 longbox project, check it out in projects 1969 c-10 parts pickup, twisted frame Daily driver- 1970 Olds delta 88, 2dr., 455, gotta love the big block

05-08-2008, 07:02 AM	#3
p-low Registered User Join Date: Feb 2006 Location: buffalo Posts: 178	Re: uncut dash, header panel, longbox sides here ya go Attached Images

05-08-2008, 07:03 AM	#4
p-low Registered User Join Date: Feb 2006 Location: buffalo Posts: 178	Re: uncut dash, header panel, longbox sides i cut it off allong the top of the fire wall so that the original spotweld could be drilled and rewelded, can be cut throught the dashpad holes and rewelded...or just the section with the radio but i cut it to allow alll options...thanks let me know

06-07-2008, 09:53 AM	#5
Greg63 Enjoy your truck Join Date: Oct 2007 Location: Newmarket, Ontario, Canada Posts: 1,066	Re: uncut dash, header panel, longbox sides Can you give me a picture of the crossmember? (I am not needing suspension) Is the 1/2 ton crossmember different from the 3/4 ton crossmember? __________________ 1 Corinthians 10:13 1963 Chevrolet 1/2 ton 2010 Camaro SS/RS 2014 Jeep Grand Cherokee 2016 Jeep Cherokee

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.