1969 SuperBurb build-up (Bagged and Blown!) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rokcrln · 06-09-2008, 06:24 AM

I tacked the filler piece over it then flipped it over and cut out the main vent, did some hammer work, re-installed and finished welding, Hamer and dolly some more and ground it down. Take your time as this mod is one of the hardest to do and the easiest to really screw up. With the cowl being so flat and flimsy it WILL buckle and twist real quick. The trick is knowing how to get it back into to shape after it goes nuts and still fit right.

Kevin
LFD Inc.

06-09-2008, 06:24 AM	#10
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....) I tacked the filler piece over it then flipped it over and cut out the main vent, did some hammer work, re-installed and finished welding, Hamer and dolly some more and ground it down. Take your time as this mod is one of the hardest to do and the easiest to really screw up. With the cowl being so flat and flimsy it WILL buckle and twist real quick. The trick is knowing how to get it back into to shape after it goes nuts and still fit right. Kevin LFD Inc.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.